2009 BMW X5
12 recalls and 161 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN12 recalls and 161 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
5 recalls carry a do-not-drive or park-outside warning. Check whether this vehicle was remedied before driving or storing it.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2009-2012 X5 xDrive35d, 2008-2012 X6 xDrive35i, X6 xDrive50i and X6 M, 2007-2012 X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M and 2010-2011 X6 ActiveHybrid vehicles equipped with non-desiccated, passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSPI-2) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Remedy: Owners are advised not to drive their vehicles until this remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag, free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d vehicles and 2010-2011 X6 ActiveHybrid vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 14, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2009-2013 X5 xDrive 35d diesel vehicles. The engine idler pulley bolt may loosen over time and break.
Remedy: BMW will notify owners, and dealers will replace the idler pulley bolt with an improved part, free of charge. The recall began March 11, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, 2009-2010 X5 xDrive35d vehicles and 2009-2013 X6 xDrive35i, X6 xDrive50i, and X6 M vehicles ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." BMW is also recalling certain 2007-2010 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X5 xDrive35d, X6 xDrive35i, X6 xDrive50i and X6M vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." BMW is also recalling certain 2007-2009 X5 xDrive30i, X5 xdrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X5 xDrive35d, X6 xDrive35i, X6 xDrive50i and X6M vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag module, free of charge. The recall is expected to begin March 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Remedy: BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2012 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X6 xDrive35i, X6 xDrive50i, and X6 M vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, BMW is recalling certain 2009 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, and X5 M vehicles, 2008-2009 X6 xDrive 35i, X6 xDrive50i, X6 M, and 2009 X5 xDrive35d vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Additionally, unless included in "Zone A" or "Zone B" above, BMW is recalling certain 2007-2008 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, and 2008 X6 xDrive35i, X6 xDrive50i, and X6 M vehicles originally sold, or ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to high absolute humidity and temperature cycling.
Remedy: Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the front passenger air bag inflator or air bag module, free of charge. Interim letters were mailed March 2017. Owners will receive a second notice when remedy parts become available. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011 X6 ActiveHybrid, 535i xDrive Gran Turismo, 535i Gran Turismo, 550i xDrive Gran Turismo and 550i Gran Turismo, 2011-2012 528i, 535i, 535i xDrive, 550i and 550i xDrive and 2012 535i ActiveHybrid, 640i Convertible, 650i Convertible, 650i xDrive Convertible, 650i Coupe and 650i Coupe xDrive vehicles. The affected vehicles have in-tank fuel pumps that may have insufficiently crimped wire contacts.
Remedy: BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, 2009-2011 X5 xDrive35d vehicles, 2008-2011 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, and 2010-2011 X6 ActiveHybrid vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, BMW is recalling certain model year 2007-2008 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, and 2008 BMW X6 xDrive35i, X6 xDrive50i and X6 M vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles of these model years and models that were not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to high absolute humidity and temperature cycling.
Remedy: Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger frontal air bag inflator or air bag module, free of charge. The recall began July 28, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW is recalling certain model year 2009-2010 X5 xDrive35d vehicles equipped with a diesel engine and manufactured from June 13, 2009, through November 9, 2009. The fuel filter heater, which is used for warming up the diesel fuel during vehicle operation at low outside temperatures, could experience an electrical overload condition and become permanently activated.
Remedy: BMW will notify owners, and dealers will replace the fuel filter heater, free of charge. The safety recall began on September 26, 2013. Owners may contact BMW customer relations at 1-800-525-7417.
BMW IS RECALLING CERTAIN MODEL YEAR 2009 X5 XDRIVE35D VEHICLES EQUIPPED WITH A DIESEL ENGINE AND MANUFACTURED FROM OCTOBER 1, 2008, THROUGH JUNE 12, 2009. THE FUEL FILTER HEATER, WHICH IS USED FOR WARMING UP THE DIESEL FUEL DURING VEHICLE OPERATION AT LOW OUTSIDE TEMPERATURES, COULD EXPERIENCE AN ELECTRICAL OVERLOAD CONDITION AND BECOME PERMANENTLY ACTIVATED.
Remedy: BMW WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE FUEL FILTER HEATER FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 11, 2011. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.
BMW IS RECALLING MY 2009 X5 AND X6 VEHICLES. THE REAR BRAKE DISCS MAY NOT HAVE BEEN MANUFACTURED ACCORDING TO SPECIFICATIONS. AS A RESULT, A REDUCTION IN BRAKING PERFORMANCE AT THE AFFECTED REAR WHEEL COULD OCCUR.
Remedy: BMW WILL NOTIFY OWNERS AND WILL REPAIR THE VEHICLES BY INSPECTING THE REAR BRAKE DISCS AND, IF NECESSARY, REPLACE THEM FREE OF CHARGE. THE SAFETY RECALL BEGAN ON SEPTEMBER 11, 2009. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES TOLL-FREE AT 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The stated maximum load specified in the user manual is incorrect. This could cause users to overload the vehicle, potentially leading to damage to the car and an increased risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
MY DAUGHTER WAS PUT IN THE BACKSEAT IN A HOT (100F) CAR AND STRAPPED IN. MY WIFE PLACED HER PURSE (KEYS IN IT) ON THE MIDDLE CONSOLE. THE DOOR WAS SHUT AND LOCKED ON ITS OWN, LOCKING MY CHILD IN THE CAR. WE CALLED BMW ASSIST TO REMOTELY UNLOCK THE CAR. THIS DID NOT WORK. POLICE AND FIRE WAS CALLED AND SHOWED UP ON SEEN. A NEIGHBOR FIREMAN CAME AND BROKE THE WINDOW. THE CAR STILL WOULD NOT UNLOCK AND MY WIFE CRAWLED THROUGH THE BROKEN WINDOW CUTTING HER LEG TO GET MY NOW HOT, RED AND LETHARGIC CHILD OUT OF THE CAR. AFTERWARD, THE CAR STILL WOULD NOT UNLOCK FOR 2 HOURS. *TR
TL* THE CONTACT OWNS A 2009 BMW X5. WHILE DRIVING 40 MPH, THE CONTACT WAS INVOLVED IN A MULTIPLE VEHICLE COLLISION. AS A RESULT, THE CONTACT CRASHED INTO THE REAR OF ANOTHER VEHICLE. THE AIR BAGS FAILED TO DEPLOY. THE CONTACT SUSTAINED BACK, NECK, AND PELVIS INJURIES THAT DID NOT REQUIRE MEDICAL ATTENTION. THE DRIVER OF THE OTHER VEHICLE WAS NOT INJURED. A POLICE REPORT WAS NOT FILED. THE VEHICLE WAS TOWED TO A COLLISION CENTER. THE VEHICLE WAS NOT TAKEN TO A DEALER. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 72,000.
TL* THE CONTACT OWNS A 2009 BMW X5. WHILE DRIVING, THE CONTACT SMELLED SOMETHING BURNING FROM THE AIR CONDITIONING VENTS AND SMOKE BEGAN TO FILL THE VEHICLE. THERE WERE NO WARNING INDICATORS ILLUMINATED PRIOR TO THE FAILURE. THE FAILURE OCCURRED NUMEROUS TIMES, WHICH RESULTED IN A CRASH. A POLICE REPORT WAS FILED. THERE WERE NO INJURIES. THE CONTACT RECEIVED A NOTICE FOR NHTSA CAMPAIGN NUMBER: 17V683000 (ENGINE AND ENGINE COOLING). THE VEHICLE WAS TAKEN TO THE DEALER (BMW OF SOUTH ATLANTA, 4171 JONESBORO RD, UNION CITY, GA 30291 (770) 969-0755). THE VEHICLE WAS NOT REPAIRED. THE CONTACT WAS INFORMED THAT PARTS WERE NOT AVAILABLE. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE VIN WAS UNKNOWN. THE FAILURE MILEAGE WAS 160,000. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
While parked in my driveway, the car by it self caught fire and melted the entire fusebox, major wire harness, entire right rear panel was burnt and melted, rear headliner, and rear light housing. When I opened the door there was a huge black cloud of smoke inside.
MY CAR CAUGHT FIRE WHILE DRIVING UNDER MY PASSENGER BACKSEAT WHERE THE FUEL PUMP IS LOCATED UP UNDER. THE FIRE DEPARTMENT CAME, SNATCHED OUT SEAT AND PUT THE FLAME OUT.
MY TRUCK BMW PARKING FOR MORE THAN 6 HOURS, FIRE WITHOUT A KNOWN CAUSE, REMAINING WITH TOTAL LOSS, I COMMUNICATED VIA EMAIL WITH THE BMW, AFTER REVIEWING THE INTERNET AND FIND THE RESEARCH DONE BY YOU, AND RECEIVING THE POSSIBLE DIAGNOSTIC OF WHAT HAPPENED "AN OVERHEATING IN THE PCB VALVE THAT RUSTED AND CAUSED THE TRUCK TO FIRE", AND KNOWING THE BELLS THAT ARE REAPING TO PICK UP THE VEHICLES IN THE UNITED STATES AND CANADA, BUT THAT THEY KNOW SHOULD BE EXTENDED TO OTHER COUNTRIES, I PUT IN I KNOW THE FACTS, RECEIVING FROM THEM, EXACTLY THE BMW GROUP MEXICO, THE ANSWER THAT THEY HAD NO RESPONSIBILITY FOR THESE EVENTS, BECAUSE TWO YEARS AGO I DID NOT MAINTAIN OR WASH THE ENGINE WITH THEM; FACTS THAT HAVE NOTHING TO DO WITH THE DEFECT OF THE VEHICLE. PLEASE ASK FOR YOUR HELP AND COLLABORATION, THE INCIDENT OCCURRED IN CUCUTA, COLOMBIA. THE POLICE OF MY COUNTRY MADE AN INSPECTION OF THE EVENTS, WHICH RESULTED IN THE FACT THAT THERE WAS NOTHING EXTERNAL THAT HAD CAUSED THE FIRE, WHICH WAS THE TRUCK ALONE, WHICH CAUGHT ON AND IN VERY SHORT TERMS WAS BURNED AS A TOTAL LOSS. I REALLY UNDERSTAND THAT THIS COUNTRY HAS RULES THAT CAN GIVE ME A PROTECTION, BUT THE BMW IS ONE, AND THE MANUFACTURER MUST RESPOND FROM ANY POINT OF VIEW, BY VEHICLES THAT MANUFACTURE NO MATTER WHERE THEY ARE. REVIEWING THE MODELS AND YEARS TO WHICH THEY ARE PREDICTED TO HAVE THIS DEFECT, IS THE X5 SERIES, BETWEEN THE YEARS OF MANUFACTURE 2007 TO 2011, AND THE TRUCK OF MY PROPERTY IS X5 - 2009. THIS IS THE ANSWER THAT THE BMW INVIA "DEAR [XXX] : THANK YOU FOR CONTACTING THE BMW GROUP. BASED ON YOUR EMAIL, WE INTERNALLY REVIEW THE HISTORY OF YOUR BMW XDRIVE30I, VIN [XXX], WITH FACTORY WARRANTY EXPIRED IN APRIL 2011. WE FOUND A PAIR OF KEYS READING, WHICH SHOWS LAG IN THE REQUIRED MAINTENANCE SERVICES ACCORDING TO FACTORY SPECIFICATIONS. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
TL* THE CONTACT OWNS A 2009 BMW X5. THE CONTACT STATED THAT WHEN STARTING THE VEHICLE TO DRIVE, A BURNING ODOR EMITTED INTO THE VEHICLE VENT. THE VEHICLE WAS TAKEN TO LAUDERDALE BMW OF PEMBROKE PINES DEALER, LOCATED ON 14800 SHERIDAN PINES, FL 33028, PHONE: (954) 620-5050, WHERE IT WAS REJECTED TO BE SERVICED DUE TO THE REMEDY PART FOR THE RECALL REPAIR WAS NOT AVAILABLE. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: (FUEL SYSTEM, GASOLINE) AND 17V683000 (ENGINE AND ENGINE COOLING) HOWEVER, THE PART NEEDED FOR THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS CONTACTED AND MADE AWARE OF THE FAILURE AND INFORMED THAT THE PART WAS NOT AVAILABLE FOR THE REPAIR. THE APPROXIMATE FAILURE MILEAGE WAS 100,000. PART DISTRIBUTION DISCONNECT AND VIN TOOL CONFIRMS PART NOT AVAILABLE.
THIS SUV HAS 3 SAFETY RECALLS. BOTH THE AIRBAGS ARE IN THE TAKATA AND THE FUEL PUMP CREATES AND EXTREME RISK TO ME AND MY FAMILY'S LIFE. I DO NOT UNDERSTAND WHY BMW IS AS A COMPANY IS KEEPING THESE FAULTY CARS ON THE ROAD. EVERY TIME I GET IN IT I AM NERVOUS AND AFRAID FOR MY LIFE. NOW MY WIFE AND KIDS DO NOT DRIVE WITH ME IN THE CAR. IT HAS BECOME A HUGE BURDEN. IT IS SHAMEFUL THAT BMW BUT EVEN MORE SO THAT OUR GOVERNMENT WILL ALLOW THESE UNSAFE CARS ON THE ROADS. EVERY TIME I TALKED TO BMW THEY TRY TO DOWN PLAY THE ISSUE. BUT I SIMPLY CAN'T CONTINUE TO DRIVE THIS CAR AND IT'S UNFAIR TO ME BECAUSE DEALERSHIPS WON'T EVEN TAKE IT DUE TO THE SAFETY RECALLS. I KEEP SMELLING FUMES FROM THE CAR AND I BELIEVE THESE CARS ALSO HAVE ADDITIONAL DEFECTS WITH THE RADIATOR TO ADD TO THE ISSUES ALREADY EXPLAINED ABOVE. TODAY THE CAR STALLED AND I SAW SMOKE FROM THE HOOD. I DON'T KNOW IF IT WAS RELATED TO THE FUEL PUMP SITUATION BUT IT'S SO ANNOYING AND FRUSTRATING THAT BMW IS WAITING FOR PEOPLE TO ACTUALLY DIE BEFORE THEY WILL ADDRESS THESE DEFECTS IN THEIR CARS!!!! UNREAL!
TL* THE CONTACT OWNS A 2009 BMW X5. WHILE DRIVING, AN ODOR OF FUEL EMITTED INTO THE VEHICLE. WHILE IN TRAFFIC, SMOKE APPEARED UNDER THE HOOD. THE CONTACT COASTED OVER TO THE SIDE OF THE ROAD AND NOTICED ANTIFREEZE LEAKING INTO THE ENGINE. THE VEHICLE WAS TAKEN TO THE DEALER, BUT WAS NOT DIAGNOSED OR REPAIRED. THE VIN WAS INCLUDED IN NHTSA CAMPAIGN NUMBER: 16V746000 (FUEL SYSTEM, GASOLINE). THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 145,000. - (RECALL RELATED INCIDENT) TS
THE CIRCUIT BOARD FOR THE ELECTRIC AUXILIARY WATER PUMP OVERHEATED AND CAUSED SMOLDERING. *TR
TL* THE CONTACT OWNS A 2009 BMW X5. THE CONTACT STATED THAT WHILE DRIVING APPROXIMATELY 5 MPH, A VEHICLE PULLED UP AND ADVISED HIM THAT THE VEHICLE WAS ON FIRE. HE MANAGED TO PULL TO THE SIDE OF THE ROAD AND SAW THAT THE REAR DRIVER'S SIDE WAS ON FIRE. THE FIRE WAS ABLE TO BE EXTINGUISHED USING SNOW AND WATER. THE VEHICLE WAS THEN TOWED TO THE DEALER WHERE THEY ADVISED HIM THAT THE CALIPER WAS HANGING AND CAUSED A BRAKE FAILURE, WHICH ULTIMATELY LED TO THE FIRE. THE VEHICLE WAS REPAIRED FOR THE CALIPERS, ROTORS, BRAKE PADS, SHOCKS, AXLE AND BRAKE LINES. THE MANUFACTURER WAS CONTACTED AND THEY OFFERED NO ASSISTANCE. THE FAILURE AND THE CURRENT MILEAGES WERE APPROXIMATELY 47,300. THE VIN WAS UNAVAILABLE.
I WAS DRIVING ON THE 95 SOUTH, BETWEEN EXIT 28 TO 39( WILLMINGTON AREA, MA) YESTERDAY ( 5/18/13) ABOUT 6:30PM. I WAS ON FAST LANE, DRIVING ABOUT 70 MPH, SUDDENLY THE CAR LOST POWER, THE DASHBOARD WARNING SIGN SHOWING POWER OUTPUT DOWN. THE SPEED OF CAR SUDDENLY DROPPED, I HAD TO PULL OVER TO BREAKDOWN LANE, BUT THE CARS BEHIND ME COULD NOT STOP QUICK ENOUGH, IT COLLIDED WITH MY BACK BUMPER, LUCKILY NO PERSONAL INJURY, AND THE CAR ONLY GOT SLIGHT SCRATCH. THANKS TO THE CARS BEHIND ME SLOWED DOWN IN TIME. IT WAS SO SCARE FOR ME, NEVER HAD SUCH THING AS LOSS OF POWER BEFORE ON HIGHWAY. THERE MUST BE SOMETHING WRONG WITH THE BMW ELECTRONIC DESIGN. TO AVOID OTHER ACCIDENTS, PLEASE INVESTIGATE THIS THOROUGHLY. IT COULD CAUSE FATAL RESULTS IF HAPPENS TO SOMEONE ELSE. THANKS. *TR
TL*THE CONTACT OWNS A 2009 BMW 528. THE CONTACT STATED THAT WHILE THE VEHICLE WAS STOPPED, THE BRAKE PEDAL EXTENDED TO THE FLOORBOARD AND IT MOVED FORWARD AND CRASHED INTO A WALL. THERE WERE NO INJURIES. THE CONTACT TOOK THE VEHICLE TO THE DEALER AND THE MANUFACTURER SENT A TECHNICIAN TO INSPECT THE VEHICLE; THE TECHNICIAN COULD NOT FIND ANYTHING WRONG. THE FAILURE MILEAGE WAS 15,200.
The contact owns a 2009 BMW X5. The contact stated while driving at an undisclosed speed, several unknown warning lights illuminated, and the engine seized. The vehicle failed to restart. The vehicle was towed to an independent mechanic who was a certified BMW mechanic, where it was diagnosed with VANOS bolts failure. The contact was informed that the VANOS bolts needed to be replaced. The vehicle was not repaired. The dealer was made aware of the failure but provided no assistance. The contact referenced NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the VIN was not included in the recall. In addition, the contact stated that the dealer confirmed the failure and declined to perform a diagnostic test due to the age of the vehicle. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 175,000.
The contact owns a 2009 BMW X5. The contact stated that after pulling into a parking space there was white smoke coming from underneath the hood of the vehicle and the engine started overheating. The contact added coolant immediately. There were no warning lights illuminated. The failure had occurred twice. The vehicle was taken to a certified mechanic who diagnosed that the water pump, thermostat, and heater hoses had failed and needed to be replaced. The vehicle was repaired. The contact stated that the coolant had leaked out and the engine started overheating. The contact added more coolant to the coolant reservoir; however, the failure recurred 20 miles later. After parking the vehicle, the contact became aware that oil was leaking underneath the vehicle. The vehicle had not been returned to the mechanic. The vehicle had not been taken to the dealer. The manufacturer was informed of the failure however, the VIN was not included in a recall. The manufacturer referred the contact to the NHTSA Hotline to file a complaint. The failure mileage was 230,000.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.