2023 BMW X5
4 recalls and 31 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN4 recalls and 31 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2023 Toyota GR Supra, 3 Series Sedan (330i xDrive, M340i xDrive, M3), 5 Series Sedan (530i, 530i xDrive, M5), 4 Series Gran Coupe (430i, 430i xDrive), 4 Series Coupe (430i, 430i xDrive, M440i xDrive), 4 Series Convertible (430i, 430i xDrive, M440i xDrive), 8 Series Coupe (840i, M850i xDrive, M8), 8 Series Convertible (840i, M850i xDrive, M8), 8 Series Gran Coupe (850i xDrive, M8), X3 SAV (X3 xDrive30i, X3M), X4 SAV (X4 xDrive30i), X5 SAV (X5 xDrive40i, X5 M50i, X5M), X6 SAV (X6 xDrive40i, X6 M50i, X6M), and Z4 sDrive30i, Z4 M40i vehicles. The weld seam of the integrated transmission control unit's cover may not have been manufactured properly, which could allow automatic transmission oil to leak into the transmission control unit.
Remedy: Dealers will replace the transmission mechatronics module and the automatic transmission fluid, as necessary, free of charge. Owner notification letters were mailed January 26, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2023 X5 sDrive40i, X5 xDrive40i, X5 M50i, X5 M and X5 xDrive45e vehicles. The head restraints for the second-row outboard seats may have been improperly manufactured without locking tabs in the guide sleeves. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 202, "Head Restraints."
Remedy: Dealers will inspect and replace the second-row outboard seat head restraint guide sleeves, as necessary, free of charge. Owner notification letters were mailed May 31, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2023 X5 sDrive40i, X5 M50i and X5 xDrive 45e vehicles. One of the four bolts that connects the backrest to the driver's seat frame may not have been correctly installed.
Remedy: Dealers will inspect the driver's seat backrest and if necessary, install an attachment bolt, free of charge. Owner notification letters are expected to be mailed February 17, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2023 X5 sDrive40i, xDrive40i, xDrive45e, and X7 xDrive40i vehicles. The windshield may not have been properly bonded to the vehicle which could allow water to enter the vehicle and contact electrical components, possibly resulting in a short-circuit.
Remedy: Dealers will inspect the windshield seal and as necessary, remove and reinstall the windshield with a new seal, free of charge. Owner notification letters were mailed December 30, 2022. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The stated maximum load specified in the user manual is incorrect. This could cause users to overload the vehicle, potentially leading to damage to the car and an increased risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
While driving the vehicle at highway speed, the vehicle did not respond as expected during braking. Upon attempting to slow the vehicle, control was lost, the vehicle became unstable, left the roadway, and rolled. As a result of the incident, the driver sustained serious injuries requiring emergency transport and hospitalization. No warning lamps, messages, or brake-related alerts were observed prior to the incident. After the crash, the BMW mobile application displayed a brake system malfunction warning indicating an integrated system brake failure, with a timestamp shortly after the incident. The vehicle has not yet been inspected or diagnosed by a BMW dealer or independent service center. The vehicle remains available for inspection following the crash and has been retained post-incident pending salvage processing.
The car safety features should not allow the vehicle to move with an open door. It should also alert driver with warning if passenger door is ajar before and when in motion. The car did not register at any point (sound, dash light or otherwise) while the car door was moving that the rear driver side passenger door was ajar and door hit something. Even after collision, the vehicle still did not send any collision notice, signal driver door was open or stop automatically at any point.
The vehicle rolled away after the driver exited the vehicle with the transmission in Neutral and the parking brake was not applied. This negligent design flaw is because BMW has chosen to not revert the vehicle to Park if the door is opened like other car manufacturers. A simple software update or design change could prevent a potentially fatal incident caused by BMW’s negligence in this matter.
2023 BMW X5 had a defective water pump replaced under warranty at 27,585 miles on 9/12/2024. Today 8/10/2026 at 52,907 miles the water pump again needs to be replaced. BMW has had water pump recalls in the past for similar years of x5 SUV, but our VIN is not included in the current recalls. Photographs of the recalled water pumps look exactly like our pictures. I believe the recall should be expanded to include additional BMW models/VIN ranges.
A manufacturer defect caused connector pin corrosion and thus the head unit dash stopped working completely and needs to be replaced. The head unit is what the back up camera comes through causing safety concern. It is no longer under warranty because of the miles, otherwise yearwise it would be. BMW won’t provide any good will assistance. This happened in 2026 on a 2023 model year. It has been brought to a bmw service center with a quote of over 6k to fix. No warning symptoms.
Sunroof leaks into cabin and there is no known solution for this model year 2023 BMW X5. It is my understanding that model years 2020-2023 all have this issue and a class action lawsuit is being reviewed. BMW has also issued a TSIB but there is no known recall. They will replace the seals under warranty but that is only a 2-3 year solution and will need to be redone.
Noticed noise. Took to dealer. Dealer confirmed bad front pinion/bearing and need front differential. Will be very dangerous if not fixed! Dealer has had this issue before and online forums state big issues
Drivetrain malfunction reoccurring 2x in 45 days. First error message the dealer charged me 600 to fix. Bringing car in second time now. Unsafe to drive due to power cutoff. This is a PHEV. Car is under the original mfr warranty and less than 3 years old.
Drivetrain malfunction creating error message of critical failure on brake system and chassis. The first of 2 such issues so far in 4 months of ownership. Car is under original mfr warranty. Dealer charged $600 to fix. This is a PHEV and with the electrical system issues it prevents the car from functioning safely
While driving under normal conditions with no external impact, debris, rock strike, or other identifiable cause, the panoramic moonroof shattered explosively (with a loud report resembling a gunshot). Glass fragments dispersed across the roof area, and portions of the panel collapsed inward into the interior mesh roof cover. This occurred without warning and posed a serious safety risk. Th problem has not been reproduced by the dealer and only been inspected by the dealer and denied as a warranty claim. Nothing in the vehicle warning system went off prior to the failure.
The seal on the sunroof of the car allows water into the car. My car will be available for inspection upon request. This issue allows water into the car around the b pillar airbag and the side window airbag which can damage the airbag and make it deploy without any accidents or make them not deploy in the case of a accident. BMW has an internal document in which acknowledging the issue with the seal but even though they recognize placing a defective part on the vehicle. They will not assume the cost of the repair if outside de 50k miles warranty. In order for the dealership to take a look at the issue an 200 dollar diagnostic is required but I was informed that if they determined that the issue on hand is due to the defective part. I will still have to pay for the repairs. There weren’t any other signs before the incident.
My sunroof spontaneously exploded yesterday, which sounded like a loud shotgun blast going off. Fortunately my vehicle was stopped at the time, but no rocks or debris had hit it to cause this then or previously, and nothing had fallen on it. No warning or other symptoms prior to this happening, the car was in mint condition and always garaged, 34,750 miles. Could have been much worse had I been driving at highway speeds and not stopped at a traffic light.
While on a stretch of two lane highway with no shoulders I got some flashing error messages that were too quick to read, then the car made the shutdown sound like when you turn the car off, and said “Goodbye” on the screen. The gas pedal was unresponsive, pulled itself away from my foot. The screen showed what it normally shows when you turn the car off - option to charge immediately or precondition now. Car was just coasting. Eventually I hit the start button and the car turned back on. I think one of the error messages that flashed said Driver Assistance Disabled… the car doesn’t have any advanced drivers assistance packages so not sure what that could mean. I have a vague memory of this happening to me once over a year ago, pulling out of the driveway, and having to hit start to turn it back on.
While driving, the information LED screen on the car flickered and went black within a second. Other electric components malfunctioned as well, e.g. radio, air conditioning/heating. Obviously, the cameras and safety systems associated with the screen also did not work. There was no warning that this was going to happen and, without these safety features, I felt that I was at a greater risk. The next day, I took the car to a BMW dealership, and was told that the Head Unit High was malfunctioning due to corrosion. The car has just under 51,000 miles and the unit should have been insulated against any moisture (the car was never flooded). I feel that this is a manufacturing defect that has put me, as the driver when it occurred, at risk.
On the driver's side the headlight's smaller light stopped working. I brought the car to BMW and they said the LED burned out, which also caused burn marks on the headlight assembly, so the entire headlight assembly needs to be replaced.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.