2020 BMW X5
11 recalls and 109 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN11 recalls and 109 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2020 340I, X6, 2020-2025 840I, 2020-2022 740LI, 2019-2020 X7, and X5 vehicles. After repeated attempts, the starter motor may overheat from an electrical overload.
Remedy: Dealers will replace the engine starter, free of charge. This recall includes vehicles repaired under recall 24V576 and those owners will need to have their vehicle repaired again. Owner notification letters were mailed February 9, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov November 17, 2025.
BMW of North America, LLC is recalling certain 2019-2020 X5, X7, 2020 3 Series Sedan, X6, 2020-2021 7 Series Sedan, 2020 8 Series Convertible, 8 Series Coupe, and 2020 8 Series Gran Coupe vehicles. Please see the recall report for the complete list of models. In the event the starter motor fails, repeated attempts to start the vehicle can cause the starter motor to overheat from an electrical overload.
Remedy: Dealers will update the vehicle software, free of charge. Owner notification letters were mailed September 27, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022 4 Series Gran Coupe (430i, 430i xDrive, M440i xDrive); 2019-2022 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M; 2021-2022 X5 xdrive45e; 2020-2022 X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6M and 2019-2023 X7 xDrive40i, X7 xDrive50i, X7 M50i, X7 xDrive60i, X7 M60i, X7M, Alpina XB7 vehicles. The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 118, "Power-Operated Window Systems."
Remedy: Dealers will reprogram the roof function control unit, free of charge. Owner notification letters were mailed June 20, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, X4 xDrive30i, X4 M40i, M550i, X4M, X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5M, X5 M50i, X7 xDrive40i, X7 xDrive50i, X7 M50i, Alpina XB7, 330i, 330i xDrive, M340i, M340i xDrive, and 8 Series Coupe, Convertible and Grand Coupe, 840i, 840i xDrive, M850i xDrive, M8, 2020-2021 530e, 530e xDrive, 330e, 330e xDrive, 745Le, 745Le xDrive, X5 xDrive45e, X3 xDrive30e, X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6 M50i, X6M, 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 740i, 740Li, 740Li xDrive, M760i Drive, M760Li xDrive, 750Li xDrive Alpina, Alpina B7 xDrive, and 2021 4 Series Coupe 430i, 430i xDrive, M440i xDrive vehicles. When shifting into Reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Remedy: BMW will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began April 16, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 8 Series Coupe, Grand Coupe and convertible 840i, 840i xDrive, M850i xDrive, M8 and 740 Li, 740 Li xDrive, 750 Li xDrive, M760 Li xDrive, X6 sDrive40i, X6 xDrive40i, X6 xdrive50i, X6 M50i, X6M, and 2019-2021 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M, X7 xDrive40i, X7 xDrive50i, X7 M50i, and 2021 M3, M3 Competition, M4 Coupe, M4 Competition Coupe, X5 xDrive45e, 745 Le xDrive. The rotor and shaft within the integrated brake system may not have been welded properly and could separate during a hard braking event, possibly resulting in a loss of the Antilock Brake System (ABS) and braking assistance.
Remedy: BMW will notify owners, and dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed on May 25, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive40i, xDrive40i, X5 M50i, X5M, X7 xDrive40i, X7 M50i, X6 xDrive40i, X6 M50i and X6M vehicles and 2021 X5 xDrive45e vehicles. The weld between the front axle support and the right front control arm bearing bracket may separate.
Remedy: BMW will notify owners, and dealers will replace the front axle support, free of charge. The recall began December 18, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 X5 sDrive40i, xDrive40i, xDrive50i, X5 M50i, X5M, X6 sDrive40i, xDrive40i, X6 M50i, X6M, X7 M50i and 2021 X5 xDrive45e vehicles. The headlamps may allow a blue light to illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Remedy: BMW will notify owners, and dealers will inspect the headlamps and, if necessary, replace them, free of charge. The recall began October 30, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive 40i, X5 xDrive 40i and one X7 xDrive 40i vehicle. The starter motor may have an extra bolt that could potentially fall into the transmission housing and cause an engine stall.
Remedy: BMW will notify owners, and dealers will inspect the starter motor for the extra bolt, removing it if necessary. Dealers will also inspect the starter for damage, and check if the bolt has fallen into the transmission housing, replacing any damaged parts as necessary. All repairs will be performed free of charge. The recall began on October 2, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2020 X5 sDrive40i, X5 xDrive40i and X5 xDrive50i vehicles and 2020 X6M vehicles. The steering column shaft bearing plate may not have been properly attached to the vehicle, allowing it to loosen.
Remedy: BMW will notify owners, and dealers will inspect the steering column shaft bearing plate and properly attach or replace it, as necessary, free of charge. BMW telephoned owners and all of the vehicles have been remedied. No owner notification letter is necessary. Please contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018 540d, 2018-2020 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 530e, 530e xDrive, X3 sDrive, X3 xDrive, X3 M40i, X3 M, and 2019-2020 X4 xDrive, X4 M40i, X4 M, X7 xDrive, X7 M50i, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 8 Series Convertible and Coupe 840i, 840i xDrive, M850i xDrive, X5 sDrive, X5 xDrive, X5 M50i, X6 xDrive, X6 M50i, 330i, 330i xDrive, M340i, M340i xDrive, Z4 sDrive, Z4 M40i, 740Le xDrive and 745Le xDrive, 2018-2019 640i xDrive Gran Turismo and Rolls-Royce Phantom, 2019 M850i xDrive Gran Coupe and Rolls-Royce Cullinan and 2020 Toyota Supra vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Remedy: BMW will notify owners, and dealers will update the back-up camera software, free of charge. The recall began November 8, 2019. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce at 1-877-877-3735. Toyota owners may contact Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2020 X5 sDrive40i, X5 xDrive40i, X5 M50i, X7 xDrive40i and X7 M50i vehicles. The steering rack pinion teeth may break under load, resulting in a loss of steering control.
Remedy: BMW will notify owners, and dealers will replace the steering rack, free of charge. The recall began August 21, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The stated maximum load specified in the user manual is incorrect. This could cause users to overload the vehicle, potentially leading to damage to the car and an increased risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
The AC system blowed hot air. There's must be a problem with this model because my friend also have the 2021 BMW X5 and its AC also have problem. We're suffering from this due to Manufacturing defect.
The contact owned a 2020 BMW X5. The contact stated while the contact's mother was driving at an undisclosed speed, another vehicle attempted to make a left turn and crashed head-on into the front driver and passenger side of the vehicle. The driver's air bag did not deploy. During the impact, the driver's head hit the windshield causing it to crack. The police and paramedics arrived on the scene. The contact and the contact's mother were transported to the local medical center. The contact's mother was treated for a severe concussion and severe cuts and bruises. In addition, the contact's mother had broken glass in her hands which was removed. The contact sustained cuts and bruises. The contact's mother received additional testing because of the impact of the steering wheel on the chest, however the test results were negative. A police report was filed, however, the information was unavailable. In addition, the police officer inspected the vehicle and noticed the driver's seat belt had a lot of play, which could have contributed to the contact's mother's head injury. The vehicle was towed to the local tow yard and condemned as a total loss. The manufacturer was not made aware of the failure. The failure mileage was approximately 65,327.
While driving through west Los Angeles, the vehicle suddenly began emitting white smoke from the engine compartment. There were no prior warning lights, messages, or symptoms indicating a problem. The smoke quickly intensified and turned dark. Thick smoke filled the air, and the cockpit, with the smell of toxic fumes. I safely maneuvered to the shoulder and exited the vehicle with my passenger. Flames erupted from the front of the vehicle. We called 911, which dispatched the fire department. The LAFD responded, cutting open the hood in order to extinguish the fire. The vehicle was towed to a yard following the incident. The vehicle and its contents were declared a total loss. BWM North America dispatched a technician to inspect the vehicle. After inspection, the manufacturer indicated that the starter was the source of the fire. At the time of the incident, the vehicle was subject to a safety recall related to the starter with no remedy available. The failure occurred without warning. Both occupants were exposed to heavy smoke.
I own a 2020 BMX X5 S40i. Car was parked and turned off. When I tried to turn the car ON, the car refused to start and smoke and fire smell started coming from engine compartment. I opened the hood and could smell a burning smell. Waited for smell to disappear and tried starting the car again. Car would not start and burning smell appeared again. Got a warning on the dashboard that engine compartment was overheated and car would be ready to start after 180 seconds. Called AAA to jump start car and same behaviour was observed and car refused to start. Technician also stated that battery was completely dead. Took car to dealer and replaced main and start/ stop battery. Car still would not start. On inspection dealer observed started mechanism was shorted and needed to be replaced. After replacement, car starts fine without burning smell. Going through recall database, this issue with fire hazard from starter assembly is documented for my make, model and year but when I enter the VIN number it doesnt apply to ny vehicle VIN number. 4 year old child and me were occupants of the vehicle when burning incident happened originally.
A few months ago there was a recall on my car (some problem with starter engine) and after few month I started the engine by pressing the brake pedal and pressing the start button. But the engine did not start, I saw smoke from under the hood, then I opened the hood and saw fire near the engine on the right (driver's) side. People in the parking lot helped put out the fire with a fire extinguisher while I called 911 for fire department, they came and recorded it (fire slip -[XXX]), [XXX}., Houston, Texas, 77043 (place where it happened). I have pictures and videos this incident. We were afraid that we would die in this car. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The car caught on fire spontaneously when it was parked and locked. The fire started approximately 5 minutes after it was driven for 20 minutes. The fire started under the hood. There was light smoke to begin with which got worse after around 13 minutes and then flames started spewing out at the opening between the hood and the windshield. The car was fully engulfed in flames 5 minutes later with flames going as high as 2 floors. It was finally extinguished by the fire department. The car is currently with my insurance company in their tow yard.
The contact owned a 2020 BMW X5. The contact stated that she parked the vehicle in her garage. No warning light was illuminated. The contact entered her home and 15 minutes later, a neighbor knocked on the door, alerting her that the garage had caught fire. When the contact opened the garage door, she saw flames. The contact called 911 and evacuated her family. There were no injuries sustained. The police and fire departments arrived on the scene, and the firefighters extinguished the fire. The fire destroyed all three vehicles in the garage and engulfed the residence. Police and fire department reports were filed. The vehicle was towed to the tow yard. The insurance company deemed the vehicle totaled. The contact later became aware of NHTSA Campaign Number: 24V576000 (Electrical System, Engine And Engine Cooling) associated with the VIN. The manufacturer was not made aware of the failure. The failure mileage was unknown.
Grievance/Complaint for 2020 X5 BMW Firer December 9, 2021 (49 days Owner) I was on my way to work, and I stopped at the local Bank of America drive through. While on my way, I received two (2) malfunction message saying the same thing, “ Scam Likely 1-470-781-9727; (Check Control) Vehicle key missing, Close message; Vehicle key not available or malfunctioning. Drive-ready mode cannot be started. See Driver’s Manual for further information.” (This was the message/malfunction.) I took a picture and call my salesperson, Mr. Preston at BMW of Gwinnett Place and informed him that the key was in the cup, so I tried to place it on the dashboard. I did not understand why I received a malfunction message the key missing because the car would not go anywhere without a key, however, he asked me to send the picture to him and I did. As I was getting out my X5, I began to have anxiety and became traumatized (praying, crying, yelling etc.) at this point, thinking my X5 is going to catch a fire and blow up the bank. I went into the Bank to alert them of the X5 smoking so that they can evacuate if needed. I went back to my X5 to gather as much as I could of my Christmas gifts and other Items quickly. At that time another lady was standing on the side walk and asked if she could help me removed the items from my X5.I was hysterical, and my hand was bleeding from grabbing items out the X5. My safety and others was at risk. The X5 could have been in my garage on firer and my house and family could have died and lost everything; The seat belt could have locked with me in it and I could have died. The bank ATM drive through could have blown up and all the customers could have been injured.BMW of North America insisted that I fill on my insurance because the the engineers did an observation investigation and did not see any fault of manufacture or electrical issue.The vehicle is now under the investigation of my insurance and I have not been notified of the cause at this time.
I was parking the car in a parking lot. I had my foot completely off of the gas pedal while allowing the car to roll forward into a parking spot. The car suddenly accelerates and I could not slam on the brakes fast enough to prevent damage. This was the 3rd time this type of incident occurred in this car.
WHILE PARKING THE VEHICLE IN A HEAD-ON PARKING SPOT, THE CAR SUDDENLY ACCELERATED WITHOUT WARNING AND HIT A WALL. THE CAR THEN WENT INTO REVERSE AND SPED UP RAPIDLY UNTIL IT HIT A CONCRETE PATIO ON THE OTHER SIDE OF THE PARKING LOT. THE BRAKE PEDAL WAS DEPRESSED WITH SUBSTANTIAL FORCE THE ENTIRE TIME THE VEHICLE WAS MOVING BUT THE VEHICLE WOULD NOT STOP MOVING. THE BRAKES DID NOT ENGAGE. I DO NOT RECALL HOW THE CAR WENT FROM DRIVE TO REVERSE. FORTUNATELY, THERE WERE NO PEOPLE OR CARS IN THE PARKING LOT AT THE TIME OF THE INCIDENT. THE AUTO BODY SHOP THAT CURRENTLY HAS POSSESSION OF THE VEHICLE COULD NOT FIND ANYTHING WRONG WITH THE COMPUTER/ELECTRICAL SYSTEMS IN THE VEHICLE NOR WERE THEY ABLE TO RECREATE THE INCIDENT. I DO NOT KNOW HOW THOROUGH THEY LOOKED FOR PROBLEMS. BMW HAS BEEN NOTIFIED AND HOPEFULLY THEY WILL SEND A CREW TO INVESTIGATE. THE CAR IS CURRENTLY AT THE AUTO BODY SHOP BUT MY INSURANCE GOMPANY, GEICO, WILL HAVE THE CAR TOWED TO ONE OF THEIR FACILITIES IN A COUPLE OF DAYS. THE CAR HAS BEEN DEEMED A TOTAL LOSS DUE TO ALL OF THE DAMAGE. I HAVE BEEN HAVING ELECTRONICS ISSUES WITH THE CAR SINCE PURCHASE IN JUNE 2020, HOWEVER, THEY HAVE BEEN RELATED TO THE ENTERTAINMENT AND COMMUNICATION SYSTEMS. IN HINDSIGHT, I REALIZE THAT I HAD TWO OTHER INSTANCES IN THE PAST WITH SUDDEN ACCELERATION WITH THIS CAR. I THOUGHT NOTHING OF IT AT THE TIME BUT THEY MAY BE RELATED TO THIS LATEST INCIDENT.
I'm reporting a safety issue with BMW vehicles equipped with the B58TU engine, primarily 2019-2021 models. These vehicles have an oil pump with an internal plastic component that regulates oil pressure, and this part is fracturing in the field, causing sudden loss of oil pressure. The failure typically occurs during cold starts in low temperatures. When it fails, oil pressure becomes erratic or is lost entirely, often with little to no warning before engine damage or vehicle disablement. Warning signs, when present, include inability to measure oil level electronically, abnormal oil pressure, or sudden drivetrain malfunction warnings. These can rapidly progress to engine shutdown or severe damage from oil starvation. This creates a dangerous situation because the vehicle can become disabled without warning while driving or after startup. This is especially hazardous when cars become immobilized in traffic or during winter conditions when failures occur most frequently, leaving occupants exposed to freezing temperatures while awaiting assistance. Pump replacement requires extensive disassembly and commonly costs $6,000-$8,000, assuming no engine damage. A critical concern: owners cannot determine if their vehicle has the original plastic pump or the later metal revision. BMW's VIN-based parts lookup now shows updated components even when original plastic parts remain installed, and BMW has removed the original plastic part number from dealer networks entirely. Failures are reported across multiple production years, and the scope of affected vehicles remains unclear. Because this condition causes sudden vehicle disablement without adequate warning, especially in cold weather, I believe this warrants investigation as a potential safety-related defect.
I am reporting a safety concern involving BMW vehicles equipped with the B58 Technical Update (B58TU) engine, commonly found in model years 2019–2021. These vehicles utilize a variable-displacement engine oil pump containing an internal thermoplastic adjusting component responsible for regulating engine oil pressure. Failures have been reported in which this internal plastic component fractures, resulting in sudden loss of or instability in engine oil pressure. My own vehicle has experienced this oil pump failure. The failure is particularly concerning because it can occur during cold-start operation and appears to be more prevalent in low ambient temperatures. When the internal component fails, oil pressure regulation can become erratic or be lost entirely. The resulting loss of lubrication can lead to severe engine damage or vehicle disablement. Reported precursor symptoms include an inability to electronically measure the engine oil level, abnormal oil-pressure behavior, drivetrain malfunction warnings, and other warning messages. However, these symptoms may provide little meaningful advance warning before the vehicle becomes disabled or the engine sustains significant damage. The safety concern is not limited to the cost of the repair. A sudden loss of oil pressure can cause the vehicle to become disabled without warning while driving or shortly after startup. This presents a potential safety hazard if the vehicle loses power or becomes immobilized in active traffic. The risk is particularly concerning during cold-weather operation, when these failures appear to occur most frequently. In winter conditions, occupants of a disabled vehicle may also be exposed to freezing temperatures while waiting for roadside assistance. Replacement of the oil pump is a major repair with cost ranging $6000-8000, even when engine has not been damaged. These costs are secondary to the safety concern but demonstrate the seriousness of the defect and the potential severity.
I am reporting a safety concern involving BMW vehicles with the B58TU engine, model years 2019-2021. These engines use a variable-displacement oil pump with an internal thermoplastic adjusting ring that regulates oil pressure. Field failures are being reported in which this component fractures, causing sudden loss or instability of oil pressure. Owners and independent shops report catastrophic engine damage within minutes, with little or no advance warning. A sudden loss of motive power at highway speed, or an engine seizure in traffic, creates a crash risk. I have not experienced a failure. I am reporting because: 1. My vehicle falls within the affected production range. 2. Owners cannot determine whether their vehicle has the original thermoplastic pump or the later metal revision. BMW issued the revised part without changing the part number, and VIN-based parts lookups reportedly return the updated component even when the original is still installed. This deprives owners of any means of assessing their own risk. 3. BMW quietly revised the design to all-metal, indicating the manufacturer identified a durability problem, yet no recall or customer notification has been issued in the United States. 4. Out-of-warranty repair requires removal of the front subframe and eight or more hours of labor. Owners report quotes near $6,000. 5. In South Korea, the Ministry of Land, Infrastructure and Transport opened a formal investigation into this same defect in XXX. BMW Korea then confirmed it is performing this repair free of charge regardless of warranty status. A foreign regulator has already found this serious enough to investigate. I request that NHTSA investigate the B58TU oil pump, determine the failure rate, and evaluate whether a safety recall is warranted. At minimum, owners should be given a reliable method of identifying which pump revision is installed in their vehicle.
The oil level reading is failing at 16% due to an oil pump malfunction. BMW has addressed this on all 2022+ b58 engine but all prior years have the plastic failing oil pump. The had to upgrade it because it cause catastrophic failure to the engine. It creates oil pressure with plastic parts and was upgraded to all metal in 2022. There should be a recall for this part since it can cause catastrophic engine failure at any point anywhere while driving at any speed, slow, fast, speed limit. Doesn’t matter the part can fail and injure or kill people
I am on my third front differential in first in 2023, one in 2025 and now one in 2026. All M50I have this issue but the X5 M model does not.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.