2026 Ford Mustang
5 recalls and 0 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN5 recalls and 0 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
Ford Motor Company (Ford) is recalling certain 2026 Explorer, Bronco, Bronco Sport, Mustang, and Ranger vehicles. The engine piston domes may have been manufactured incorrectly, which can result in piston dome failure and lead to a loss of drive power.
Remedy: Dealers will inspect the engine pistons and replace the engine long block, if necessary, free of charge. Interim letters, notifying owners of the safety risk, were mailed September 3, 2026. Additional letters will be sent once the remedy is available, anticipated in December 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S61. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on August 28, 2026.
Ford Motor Company (Ford) is recalling certain 2024-2026 Mustang vehicles. The engine compartment wiring harness ground connections may fracture and result in a loss of drive power, or a loss of function in the windshield washing system, headlights, air conditioning, or engine cooling fan. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 108, "Lamps, Reflective Devices, and Associated Equipment," and 104, "Windshield Wiping and Washing Systems."
Remedy: Dealers will replace the engine compartment wiring harness ground terminals, free of charge. Interim letters, notifying owners of the safety risk, were mailed September 5, 2026. Additional letters will be sent once the remedy is available, anticipated in March 2027. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26C40. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on August 28, 2026.
Ford Motor Company (Ford) is recalling certain 2024-2026 Mustang and 2025-2026 Mustang GTD vehicles. During certain cold temperature conditions, the windshield wipers may function only at their high-speed setting and the washing system may fail to function properly.
Remedy: Dealers will inspect and replace the wiper motor as necessary, free of charge. Owner notification letters were mailed August 11, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26C32. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on July 2, 2026.
Ford Motor Company (Ford) is recalling certain 2026 Explorer and Mustang vehicles. The engine piston circlips may have been incorrectly installed during manufacturing, which can result in piston failure and engine damage, leading to a loss of drive power.
Remedy: Dealers will inspect the engine for missing or mis-installed circlips and replace the engine as necessary, free of charge. Owner notification letters were mailed April 10, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S23. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on April 2, 2026.
Ford Motor Company (Ford) is recalling certain 2026 Explorer, Mustang, Lincoln Corsair, and 2025 Maverick vehicles. The cylinder head may have been improperly manufactured, which can cause the ball plugs to fail, resulting in an oil leak.
Remedy: Dealers will replace the cylinder head assembly, free of charge. All affected vehicles are still within dealership inventory and therefore no owner notification letters will be mailed. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SD3. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on November 24, 2025.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The wrong software for the power steering control module (PSCM) may have been installed. The steering wheel can perform autonomous movements when the driver attempts to steer, as the electric power steering (EPAS) provides unintended steering assistance. Unintended steering assistance may lead to loss of control over the vehicle while driving and thus to an increased risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The incorrect calibration of the power steering control module (PSCM) could lead the steering wheel to oscillate without warning (alternating clockwise/counterclockwise) during steering due to the electric power-assisted steering (EPAS) providing unintended steering assist. This unintended steering assist could lead to loss of vehicle control while driving, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Corrosion of the front seatbelt pretensioner cable may cause it to weaken or break, reducing seatbelt effectiveness and increasing the risk of injury in a crash. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
An unsecured nut may cause the clutch pedal to fail, preventing the driver from changing gear and causing the engine to stall. If the clutch line is lowered, it may melt on hot components and brake fluid may leak and ignite. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
As a result of a polarity error in the secondary digital torque sensor in the steering gear, if the primary steering torque sensor fail, the steering wheel may oscillate when the driver is steering. This can lead to a loss of vehicle control while driving, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.