2021 BMW X7
9 recalls and 46 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN9 recalls and 46 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2019-2022 BMW X7 xDrive40i, X7 Drive50i, X7 M50i vehicles with third-row seats. One or more of the compression springs that lock the backrest may not have been installed properly, and could dislodge or detach.
Remedy: Dealers will inspect the third-row seat and, if necessary, remove and reinstall improperly installed compression springs, and reinstall any missing springs, free of charge. Owner notification letters were mailed November 4, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022 4 Series Gran Coupe (430i, 430i xDrive, M440i xDrive); 2019-2022 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M; 2021-2022 X5 xdrive45e; 2020-2022 X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6M and 2019-2023 X7 xDrive40i, X7 xDrive50i, X7 M50i, X7 xDrive60i, X7 M60i, X7M, Alpina XB7 vehicles. The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 118, "Power-Operated Window Systems."
Remedy: Dealers will reprogram the roof function control unit, free of charge. Owner notification letters were mailed June 20, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2021 X5 sDrive40i, X5 xDrive50i, X5 M50i, X5 xDrive45e, 2021 X7 xDrive40i, X7 M50i, and XB7 vehicles. The head restraints on the second-row outer seats may be the incorrect type for the vehicle.
Remedy: BMW will notify owners, and dealers will inspect the head restraints, and replace them as necessary, free of charge. The recall began May 3, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 X3 sDrive30i, X3 xDrive30i, X3 M40i, X3M, X4 xDrive30i, X4 M40i, M550i, X4M, X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5M, X5 M50i, X7 xDrive40i, X7 xDrive50i, X7 M50i, Alpina XB7, 330i, 330i xDrive, M340i, M340i xDrive, and 8 Series Coupe, Convertible and Grand Coupe, 840i, 840i xDrive, M850i xDrive, M8, 2020-2021 530e, 530e xDrive, 330e, 330e xDrive, 745Le, 745Le xDrive, X5 xDrive45e, X3 xDrive30e, X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6 M50i, X6M, 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 740i, 740Li, 740Li xDrive, M760i Drive, M760Li xDrive, 750Li xDrive Alpina, Alpina B7 xDrive, and 2021 4 Series Coupe 430i, 430i xDrive, M440i xDrive vehicles. When shifting into Reverse, a small portion of the rearview image may be obscured, or the screen may not illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Remedy: BMW will notify owners, and dealers will inspect the rearview camera software and update it if necessary, free of charge. The recall began April 16, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 8 Series Coupe, Grand Coupe and convertible 840i, 840i xDrive, M850i xDrive, M8 and 740 Li, 740 Li xDrive, 750 Li xDrive, M760 Li xDrive, X6 sDrive40i, X6 xDrive40i, X6 xdrive50i, X6 M50i, X6M, and 2019-2021 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M, X7 xDrive40i, X7 xDrive50i, X7 M50i, and 2021 M3, M3 Competition, M4 Coupe, M4 Competition Coupe, X5 xDrive45e, 745 Le xDrive. The rotor and shaft within the integrated brake system may not have been welded properly and could separate during a hard braking event, possibly resulting in a loss of the Antilock Brake System (ABS) and braking assistance.
Remedy: BMW will notify owners, and dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed on May 25, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2021 X5 sDrive40i, X5 xDrive40i, X5M, X5 xDrive45e, X6 sDrive40i, X6 xDrive40i, X7 xDrive40i, X7 M50i vehicles. The steering column shaft's universal joint connection may not have been tightened to specifications, and can become loose.
Remedy: BMW will notify owners, and dealers will inspect and, depending upon the inspection, either the bolt will be replaced and tightened to specifications, or the steering column shaft, universal joint, and bolt will be replaced and tightened to specifications, free of charge. The recall began March 30, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2021 M340i xDrive, M440i xDrive Coupe, 530i, 530i xDrive, 540i, 540i xDrive, 740Li, 740Li xDrive, 840i Gran Coupe, 840i xDrive Gran Coupe, X5 sDrive40i, X5 xDrive40i, X6 sDrive40i, X6 xDrive40i, and X7 xDrive40i vehicles. The connection between the 48-Volt battery and the starter-generator may not have been assembled properly, which can cause increased electrical resistance at the connections.
Remedy: BMW will notify owners, and dealers will inspect the connection between the 48-Volt battery and the starter-generator assembly, replacing it if necessary, free of charge. The recall is expected to begin April 12, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2020-2021 X5 sDrive40i, xDrive40i, xDrive50i, X5 M50i, X5M, X6 sDrive40i, xDrive40i, X6 M50i, X6M, X7 M50i and 2021 X5 xDrive45e vehicles. The headlamps may allow a blue light to illuminate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Remedy: BMW will notify owners, and dealers will inspect the headlamps and, if necessary, replace them, free of charge. The recall began October 30, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain X7 xDrive40i and M50i vehicles. The tire information labels may contain tire size and cold tire inflation pressure information that does not match the specific tires that were installed on these vehicles. As such, these vehicles fail to conform to Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Remedy: BMW will notify owners, and dealers will replace the tire information label, free of charge. The recall began October 26, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
Sunroof exploded, just driving down the road, and BOOM! Most of the glass exploded outward, but it was definitely a hazard. The sunroof cover was open about 8-10 inches to let light in, but the glass sunroof was closed.
The contact owns a 2021 BMW X7. The contact stated that while the contact's wife was driving at an undisclosed speed, the contact's wife noticed a smoky fume in the interior of the vehicle. The contact's wife continued to drive the vehicle to the intended destination. The contact stated that when the wife returned to the vehicle, the contact's wife noticed that the smoky fume was still in the interior of the vehicle. The vehicle was driven to the contact's residence. The contact stated that upon removing items from the vehicle, the contact noticed that a cardboard box that was seated on the driver's rear seat was on fire. The contact extinguished the fire. No fire report was filed. No injuries were sustained. The contact then contacted BMW and requested the vehicle to be picked up. The vehicle was towed to the dealer. The contact stated that the vehicle had been at the dealer for two weeks. The contact was informed that the failure was due to no fault of the manufacturer. The manufacturer was made aware of the failure and a case was filed. The failure mileage was approximately 25,320.
I was driving a car with family and all of a sudden we all started smelling a burning smell but we thought it must be from outside. However, in just few seconds the vents started throwing vapors so I stopped the car hoping it may stop if some minor damage. However, the hood started throwing oranges color fumes and by the time we all left the vehicle the entire front hood/engine area started burning. There were no indications of any faults in the car. This was the most shocking incident we had to face with my family where there were two kids of 4 and 9 along with my wife and her parents who are senior citizens.
Both factory key fobs simultaneously ceased being recognized for vehicle starting. The vehicle instructed me to hold the key against the emergency key-recognition point on the steering column, but that backup procedure also failed and the vehicle could not be started. A BMW Digital Key Card, which is not something drivers are expected to carry with them at all times and was kept in a drawer at my home, happened to start the vehicle. The BMW dealer subsequently diagnosed/repaired the condition under SIB 61 07 22 and Defect Code 6138270200, which BMW defines as a Body Domain Controller software error/internal equipment fault. BMW also has SIB 66 24 19 for the G07 X7 specifically describing an inability to start the engine, failure of the steering-column emergency key recognition method, Digital Key continuing to function, and a BDC software error as the cause. My concern is that this defect can unexpectedly immobilize a vehicle while simultaneously defeating the normal emergency-start procedure.
The IP Cluster that shows details on the speed the vehicle is traveling at, gas left, mileage left etc. were left inaccessible when the Instrument Panel cluster on the BMW X7 blanked out. Big Safety concern when the vehicle is unable to display travelling speed mid-drive
Under FMVSS 101, if a screen experiences a momentary "black screen" or reset cycle while driving, it is considered non-compliant because the driver loses immediate access to the speedometer, safety and ADAS functions of the vehicle. The OEM (BMW North America) does not acknowledge this issue in their vehicles and ignores repairs violating NHTSA standards.
The entire car shut down while on the highway with no prior notifications on/from the system. The entire safety of myself and family was put at risk because there where several cars behind us on the highway that could have hit us. I am not sure the dealer has been able to reproduce the issue - Unknown. There was no warning lamps, messages or symptoms of the problem prior to the failure or the car shutting off on the highway.
Just over 50k miles and barely out of warranty, the pinion bearing in the front differential failed. This is a known issue with many people on BMW forums reporting the same failure in 8 cylinder X7's. Some failures occurred in vehicles with less than 30k miles, but most seem to happen in the 40-50k mile range. This is a $10k repair and BMW does not offer an upgraded replacement part, they just replace it with the same part so the issue will reoccur. BMW should be made to replace the failing part with an upgraded part or do the repairs under warranty.
ERROR MESSAGE ON SCREEN STATING RIGHT 3RD ROW SEAT NOT LATCHED. THE SEAT WORKS PROPERLY BUT IT POPS UP EVERY TIME YOU START THE CAR. THE DEALER SAID THIS IS NOT COVERED UNDER THE APPARENT RECALL FOR OTHER LIKE VEHICLES. SEE (NHTSA Recall 22V670000) for 2019–2022 models). THIS IS REALLY SAD.
The IP cluster (gauges that display speedometer, fuel levels and other ADAS features) was blanking intermittently, BMW service center suggested software update as they believed it to be a software bug. Later, when the software update did not work, they suggested we replace the battery even though we tested it months ago and it was fine. After the battery replacement when the IP cluster was still inoperable, BMW recommended i pay another $3k for the IP replacement. I am seeing Hyundai have a similar issue but they have shared a proper recall and repair notice to consumers at NO COST. Many BMW X7 owners have faced a similar issue to mine. I am hoping to gather the complaints and pursue a national recall bulletin as the IP cluster blanking out mid drive can lead to a catastrophic scenario
The contact owns a 2021 BMW X7. The contact stated that the vehicle failed to start after several attempts, with several unknown warning lights illuminated. The vehicle was towed to an independent mechanic who was initially unable to determine the cause of the issue. The contact reached out to a BMW-certified technician who inspected the vehicle and confirmed a starter failure. The manufacturer was notified of the issue and denied a request for Goodwill assistance. The contact to paid for the repair out of pocket. The vehicle was repaired. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 83,400.
On [XXX], while traveling at highway speeds on a public roadway, the vehicle suffered a sudden, violent, and catastrophic mechanical explosion in the front drivetrain. Without any prior warning lights, dashboard messages, or operational symptoms, the front differential and driveshaft structurally shattered. The physical violence of the drivetrain components exploding at high speed sent metallic shrapnel directly into the engine compartment. This flying shrapnel pierced the structural engine block, completely destroying the engine and causing immediate, total power loss while surrounded by highway traffic. This sudden loss of propulsion and mechanical locking created an extreme, life-threatening hazard to myself and surrounding motorists. The vehicle was towed to an authorized dealership (Motorwerks BMW, Bloomington, MN). The service department confirmed the mechanical sequence: the front differential structurally failed first, and its catastrophic disintegration directly caused the secondary destruction of the engine block. The formal repair estimate is $66,124.76. BMW of North America Executive Care has formally reviewed the case and issued a written admission of fault regarding the drivetrain components, offering to cover the differential and driveshaft repairs. However, they are refusing to remedy the catastrophic engine destruction caused directly by their failed safety component. This component failure represents a severe, systemic structural safety risk that warrants an immediate federal safety investigation into 2019–2022 BMW X7/X5 front differential assemblies before an explosion results in a fatal highway collision. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
My vehicle only have 60k miles my starter is acting up. I’m getting a repeat start message at some start ups. 2017-2020 has a starter recall. I feel like this may be the same recall but not recognized yet
I am writing to report a critical safety concern regarding BMW vehicles equipped with the B58 Technical Update (B58TU) engine, specifically including my 2021 BMW X7. While my vehicle has not yet experienced a failure, I am filing this report due to the severe safety hazard and widespread nature of the variable-displacement engine oil pump defect. This pump contains an internal thermoplastic adjusting component that is prone to sudden fracture, resulting in an erratic or complete loss of engine oil pressure. According to widespread field reports, when this component fails—often during cold starts in low ambient temperatures—drivers receive little to no actionable warning before engine damage or complete vehicle disablement occurs. This sudden loss of lubrication can cause the vehicle to stall in active traffic or leave occupants stranded in freezing conditions, creating a serious and potentially life-threatening safety risk. Out of deep concern for my family's safety, I recently inquired with my local BMW dealership about preemptively replacing this pump and was quoted a staggering $21,000. It is unacceptable to place this massive financial and safety burden on consumers, especially since BMW has actively removed the plastic part number from dealer networks, making it impossible for owners to verify whether their vehicle contains the defective plastic component or the updated metal design. Given the sudden nature of these failures and the extreme safety risks involved, I strongly urge the NHTSA to open an investigation into this defect and compel BMW to issue a formal recall. Thank you for your prompt attention to this urgent safety matter.
Dear NHTSA Vehicle Safety Hotline Team, I am writing to formally report a serious safety concern regarding my 2021 BMW X7. My vehicle is exhibiting a dangerous condition where it fails to start on the initial attempt, displays a "Repeat Start Attempt" warning message on the dashboard, and then heavily strains to turn over on the second attempt.While I am aware that BMW issued a safety recall (NHTSA Campaign Number 24V-576) regarding starter motor overheating and engine fire risks for certain 2019–2021 models, I believe the current remediation or scope may not fully protect consumers from the immediate hazards of this failure.When the vehicle demands a second start attempt, it forces a high electrical draw that risks severely overheating the starter mechanism. This creates an immediate risk of electrical thermal overload and potential engine compartment fires while trying to get the vehicle moving.Below are the specific details of my vehicle and the safety incident:Vehicle Make and Model: 2021 BMW X7 Vehicle Identification Number: [XXX] Current Mileage: 57226 Incident Description: The vehicle consistently fails its initial ignition sequence. It prompts a "Repeat Start Attempt" notification, forcing a high-stress second startup sequence that poses an immediate electrical fire hazard.I request that the NHTSA review this ongoing issue, ensure that BMW's remedy effectively eliminates the fire risk during these secondary start cycles, and hold the manufacturer accountable for immediate component replacement.Thank you for your prompt attention to this safety matter. I look forward to your investigation. Sincerely, INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.