2025 BMW X4
1 recall and 2 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN1 recall and 2 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2025 X4 xDrive 30i, X4 M40i and X4 M vehicles. The inner-left roof frame near the head air bag may have a crack that can damage the head air bag during deployment.
Remedy: Dealers will inspect and if necessary, repair the inner-left roof frame, free of charge. Owner notification letters were mailed January 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
My 2025 BMW X4 xDrive30i is subject to NHTSA recall 26V438, reported 07/08/2026, covering an engine starter that can wear prematurely and, in an extreme case, overheat and cause a fire. My BMW account shows the status as Remedy Not Available. NHTSA's VIN lookup confirms the recall is incomplete with no remedy available. I am filing because there is no remedy for me to obtain. BMW has not released parts or a repair procedure. Owner letters were not scheduled to mail until 08/28/2026. I emailed my BMW service center requesting a parts availability estimate and received no response. I have not had a starter failure or thermal event. The safety concern is that I must keep driving and parking a vehicle with an acknowledged fire risk, indefinitely, with no repair available and no timeline for one. I also cannot get confirmation from BMW whether any park outside or do not drive advisory applies to my vehicle. Coverage of this campaign has been inconsistent, with some outlets describing a plug-in hybrid population affected by corrosion that carried park outside guidance. My vehicle is not a plug-in hybrid. I am concerned about the scale and repetition of this defect. This is the third BMW starter campaign in roughly twelve months, following an autumn 2025 action and a February 2026 campaign, with the affected population expanding each time. Recall 26V438 alone covers 318,495 US vehicles. Given that volume I expect parts to be rationed and my repair delayed well beyond a reasonable time. Separately, BMW Financial Services has declined to process a lease payoff quote, citing the open recall. The effect is that BMW is restricting my contractual rights over a defect only BMW can cure and cannot currently cure. The vehicle is available for inspection on request. No warning lamps or symptoms to date.
On July 12, 2026, I received notice that my 2025 BMW X4 xDrive30i is subject to NHTSA Recall 26V-438 involving the engine starter. I contacted BMW of Austin on July 13 and again on July 27 to schedule the recall repair. On both occasions, I was informed that the remedy was unavailable. No estimated repair date was provided. I then contacted BMW Recall Support Services. BMW confirmed in writing that the remedy remains unavailable and that there is no established timeframe for when it will become available. BMW also instructed me to park my vehicle away from structures until the recall repair is completed and not to use the Remote Engine Start feature through the My BMW App or remote key. BMW further instructed me to discontinue driving if I experience a delayed start, require multiple attempts to start the vehicle, or notice other starting-related concerns. However, BMW simultaneously stated that I may continue driving the vehicle and that it will not provide a loaner vehicle, rental vehicle, alternative transportation, or other accommodation while the safety defect remains unrepaired. I have not yet experienced a fire or starting-related symptoms. My complaint concerns the ongoing safety risk and the lack of an available remedy or estimated repair date. BMW has advised me to park away from structures because of the recall, but it has not explained whether the risk can occur while the vehicle is parked and turned off, what distance qualifies as “away from structures,” or how owners without access to remote outdoor parking can safely comply. I am concerned that BMW is permitting continued operation of affected vehicles while acknowledging a potential fire risk, imposing significant safety precautions, and providing neither a repair timeframe nor a practical interim solution. I request NHTSA review BMW’s current owner guidance, the ongoing unavailability of the remedy, absence of a repair timeline, and whether affected owners should receive clearer instructions
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.