2022 BMW X4
5 recalls and 3 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN5 recalls and 3 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
1 recall carries a do-not-drive or park-outside warning. Check whether this vehicle was remedied before driving or storing it.
BMW of North America, LLC (BMW) is recalling certain 2021-2023 Toyota Supra, 2022-2023 2 Series Coupe, 2021-2024 5 Series (xDrive), 2021-2022 Z4, 2022-2024 4 Series (Gran Coupe), 2021-2024 4 Series (Convertible and xDrive Convertible), 2021-2023 4 Series (Coupe), 2021-2024 3 Series, 2021-2023 X4, 2021-2024 X3 vehicles. Please see the recall report for a complete list of all models. The engine starter may overheat and catch fire due to wear on an internal component.
Remedy: Dealers will replace the engine starter, free of charge. Owner notification letters were mailed July 21, 2026. Owners may contact BMW customer service at 1-800-525-7417 or Toyota's customer service at 1-800-331-4331. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning March 24, 2026.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 BMW 330i, 2019-2022 BMW Z4, 2020-2022 BMW 530i, X3, X4, Toyota Supra, 2021-2022 BMW 430i, 430i Convertible, and 2022 BMW 230i vehicles. The engine starter relay may corrode, causing the relay to overheat and short circuit.
Remedy: Owners are advised to park their vehicles outside and away from structures until the remedy is complete. Dealers will replace the engine starter, free of charge. Owner notification letters were mailed February 6, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov November 14, 2025.
BMW of North America, LLC (BMW) is recalling certain 2022 330i, 530i, X3 xDrive30i, and X4 xDrive30i vehicles. The mechatronics unit inside the transmission may not have been assembled properly, which could result in an internal leak.
Remedy: Dealers will replace the transmission mechatronics unit, free of charge. All of the vehicle population for this recall have been repaired. Owner notification letters were not mailed. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022 X4 xDrive30i, X4 M40i, and X4M vehicles. The rear license plate may not be illuminated properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Remedy: Dealers will modify the rear license plate bracket, free of charge. Owner notification letters were mailed on December 17, 2021. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain X4 xDrive30i vehicles. The tire label may contain the wrong tire size and pressure information. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Remedy: Dealers will replace the tire information label, free of charge. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
On several occasions, the brake pedal has gone soft. Giving you the feeling that you have no breaks. on the highway when this happens, the brake pedal goes soft and then about halfway into the pedal the brakes lock up and the car veerers sharply in one direction or another. On residential street my wife was using this car this morning to take our son to daycare when she applied the brakes and ended up going through a stop sign as the brakes did not grab until she came to an extreme halt in the middle of the intersection, she then said the brakes were functioning but soft for the next 4 to 5 stops after that they went to completely normal. We had the car in a dealer last week before this incident happen where they verified that the brakes were in good working order Please note that the dealer put new brakes on three weeks ago. I’ve done some reading online and found that there’s recalls in other countries for the same problem but for some reason, my vehicle doesn’t have a recall for this. It is extremely scary when it happens.
Dear National Highway Traffic Safety Administration, I am writing to report a significant safety concern involving my 2022 BMW X4 M40i. The issue pertains to an anti-corroding substance inside the tailgate panel that has been leaking, causing damage to my vehicle's bumper and obstructing the view on my rear camera. This issue not only compromises the structural integrity of the vehicle but also poses a serious safety risk by obstructing the view from the rear camera, which is essential for safe reversing and parking. Despite taking my vehicle to Gainesville BMW for inspection, the problem remains unresolved. The Service Manager, Jose, initially acknowledged the issue but has since avoided taking appropriate action to rectify the situation. In addition, I have been in contact with Jerry from BMW Customer Relations, who has been unwilling to communicate via email as per my request. Instead, he insists on discussing the matter over the phone, which I find concerning given the importance of maintaining a documented communication trail for this serious issue. The ongoing leakage and damage to my vehicle not only compromise its functionality but also raise concerns about potential long-term safety risks. As such, I am seeking your assistance in addressing this matter to ensure that BMW takes the necessary steps to resolve this defect and prevent further safety hazards. I appreciate your prompt attention to this matter and look forward to your guidance on the next steps. Thank you for your time and assistance.
2022 BMW X4. CONSUMER WRITES IN REGARDS TO DEFECTIVE BRAKES. THE CONSUMER STATED THE VEHICLE LUNGES, ROCKS, AND JERKS WHEN THE BRAKES WERE APPLIED. THE VEHICLE WAS ROAD TESTED THE LUNGES WERE AKNOWLEDGED, BUT THE DEALER STATED THE VEHICLE WAS OPERATING AS DESIGNED. THE MANUFACTURER WAS NOTIFIED AND STATED THE VEHICLE OPERATED AS DESIGNED.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.