2025 BMW X3
9 recalls and 35 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN9 recalls and 35 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2024-2026 X3 sDrive30i, X3 30 xDrive, and X3 M50 xDrive vehicles. The steering spindle may have been incorrectly attached to the steering column.
Remedy: Dealers will inspect the steering connection and replace hardware or replace the spindle and column, as necessary, free of charge. Owner notification letters are expected to be mailed October 2, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning October 2, 2026.
BMW of North America, LLC is recalling certain 2025-2026 X3 vehicles. While the vehicle is stationary, unexpected steering wheel movement (rotation) may occur.
Remedy: The steering system software will be updated, free of charge, either over-the-air (OTA) or by a dealer. Owner notification letters were mailed February 6, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning February 2, 2026.
BMW of North America, LLC (BMW) is recalling certain 2025 X3 30 xDrive vehicles. The front brake discs may have been damaged during transport before they were installed on the vehicle.
Remedy: Dealers will replace the front brake discs and brake pads, free of charge. Owner notification letters are expected to be mailed June 6, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2025 330i, 330i xDrive, 530i, 530i xDrive, 4 Series Coupe (430i, 430i xDrive), 4 Series Convertible (430i, 430i xDrive), 4 Series Gran Coupe (430i, 430i xDrive) and X3 30 xDrive vehicles. The electrical connection between the starter-generator and battery may come loose.
Remedy: Dealers will inspect and replace the starter-generator and positive battery cable as necessary, free of charge. Interim owner letters notifying owners of the safety risk were mailed May 28, 2025. Second letters will be sent once the remedy is available. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2025 X3 30 xDrive and X3 M50 xDrive vehicles. The rear brake hoses may leak, causing a loss of rear brake function, and a loss of the Antilock Brake System (ABS) and the Dynamic Stability Control (DSC) system.
Remedy: Dealers will replace the rear brake hoses, free of charge. Owner notification letters were mailed May 9, 2025. Owners may contact BMW customer service at 800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2025 X3 30 xDrive vehicles. The connection between the positive battery cable and the starter-generator may have been improperly tightened and overheat.
Remedy: Dealers will inspect and tighten the connection between the positive battery cable and the starter-generator, or replace the positive battery cable and starter-generator if necessary, free of charge. Owner notification letters were mailed June 5, 2025. Owners may contact BMW customer service at 800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2025 X3 30 vehicles. The front wheel left-side swivel bearing may crack, causing a loss of vehicle handling and control.
Remedy: Dealers will replace the front left-side swivel bearing, free of charge. One owner was contacted December 12, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2025 X3 30 xDrive vehicles. The gas generator in the right-side head curtain air bag may have been assembled incorrectly.
Remedy: Dealers will inspect and replace the right-side head curtain air bag, if necessary, free of charge. The vehicles have not been sold from dealer inventory and therefore no owner letters will be mailed. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2025 X3 xDrive30i and X3 M50i vehicles. The front passenger air bag fabric may have been damaged during transport between suppliers.
Remedy: Dealers will replace the front passenger air bag, free of charge. None of the affected vehicles have been sold yet and therefore no owner notification letters will be mailed. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing failure, the protection of the two outer headrests in the second row is reduced. In the event of a collision or accident, passengers could be injured. In addition, headrest parts may become exposed and also cause serious injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Damaged brake discs may have been fitted to the front axle. This can lead the brakes to fail when a heavy load is placed on the wheel concerned, increasing the risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Failure to bolt the plus voltage (B+) cable tightly enough to the starter generator may result in contact problems and an increase in contact resistance at the bolted connection. This may in turn lead to local overheating and the vehicle catching fire or to the engine stalling while the vehicle is coasting. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The steering system sensor may malfunction causing an unintended steering movement of the vehicle. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The vehicles concerned have already been modified in connection with the recall code 0051960500. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion, and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver's airbag inflator propellant may deteriorate over time. If activated during an accident, excessive internal pressure may cause the inflator to burst, and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
On May 26, 2025, after I arrived home and parked my 2025 BMW X3, the vehicle caught fire approximately 30 minutes later. The fire started due to a known recall issue (NHTSA Recall No. 25V202) related to the electrical/starter-generator connection, which can cause overheating and fire. I contacted BMW multiple times before the incident — on April 19, May 9, and May 25 — requesting help to fix the open recall, but they failed to take action. The fire was sudden and violent, putting my life and property at risk. Firefighters and police responded; case number: 25/200048976. I filed a claim with Progressive Insurance and have photos and documentation available.
Vehicle: 2025 BMW X3 Complaint Description: I am reporting a serious safety defect involving sudden unintended acceleration, braking abnormalities, steering looseness, and electronic system failures. Within days of purchase, the vehicle began experiencing infotainment system freezing and electronic malfunctions. Over time, steering looseness and abnormal brake behavior developed. These issues were reported to authorized BMW service centers but were not corrected or properly documented. On May 17, 2025, while the vehicle was stationary and in park, it suddenly accelerated without driver input after a passenger exited the vehicle. I attempted to brake, but the vehicle continued forward and collided with a stone structure, causing injury. BMW later claimed driver error based on post-collision data but ignored extensive pre-collision defect evidence. The vehicle was returned from repairs and continues to exhibit malfunctions. I believe this vehicle presents a serious safety risk to drivers, passengers, and the public.
My wife was driving our 2025 BMW X3 in traffic and when the car in front braked suddenly. She tried to change lanes but clipped the car in front, resulting in nearly $22 thousand in damages. BMW's review of the car's "black box" purportedly shows that the Forward Collision Mitigation system engaged, but only a split second prior to the crash, which my wife did not experience. BMW's review also purports that my wife did not brake, which she also disputes. Even more concerning is that the parts need to repair the car seem to be completely unavailable from BMW--the car has been sitting in a body shop for almost 2 months and BMW has "no ETA" for the parts.
My accident on [XXX] with my 2025 BMW X3 VIN [XXX] was avoidable and caused by either failure in design, or in execution in two BMW systems, I'll discuss rear emergency braking here. Pictures and videos (even one of the crash) can be downloaded here: [XXX] . I was driving the car in what I believe to be an assisted parking situation, but the car did not follow the assisted path. I've filled out a safety report on that already. According to page 172 of BMW’s 416 page manual, there is a rear collision mitigation function with audible, visual, and autonomous braking. The system provided no warning of any kind—not audible, visual, or any braking whatsoever to avoid this accident. My husband had installed a trailer hitch on this vehicle. That involved removal of the bumper fascia that houses some sensors that may be involved in rear autonomous braking. However, my husband reports that the fascia was removed and replaced without incident and in exactly the same location as it originally was. We never experienced any error codes of any kind from the vehicle at any time and these sensors were working during parking to note proximity to other vehicles. There is nothing in the owner's manual to indicate any issues with removing the bumper when installing a hitch. The trailer hitch was purchased from [XXX] and they have 2 videos regarding hitch installation on the 2025 BMW X3 and my husband says he installed it consistent with these videos, as well as the PDF from the hitch manufacturer. None note having to readjust the safety system after installation of the hitch. BMW has not specifically claimed that the trailer hitch was involved, but did note that it was installed. They are involved in assessing this accident. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
FMVSS 111 is violated when iDrive9 user experience screen elements cover the rear view camera video feed. This occurs when a user HMI interaction occurs while in reverse. The HMI transitions to another window on top of the rear view. The only way to return to rear-view is to exit park assist mode and re-enter, or to put the vehicle in drive/park and then reverse again. This is dangerous while backing up and confusing to correct.
**NHTSA Complaint — 2025 BMW X3 M50 Category: Suspension / Vehicle Stability** Video Evidence: A video showing the body motion over a standard safety speed bump is available here: [[XXX]] Complaint Summary: I am reporting a suspension and stability concern with my 2025 BMW X3 M50. At very low speeds (under 5 mph), when driving over standard safety zone speed bumps, the vehicle exhibits excessive side to side body motion. After crossing the bump, the SUV rocks left to right at least twice before settling, even when all four wheels travel over the bump in a straight line. This behavior is repeatable and occurs on multiple similar speed bumps in my parking garage. The condition is significantly reduced in Sport mode, where the suspension feels tighter and more controlled. In Comfort mode, the rocking motion is pronounced and feels unstable. Dealer Visit: I brought the vehicle to the BMW Service Center in Port Chester, NY on XXXThe dealer documented the issue exactly as I described it: “At very low speeds under 5 mph the vehicle has excessive side to side body motion, feels unsettled, rocks back and forth twice before settling… The condition is significantly reduced in Sports mode.” Despite acknowledging the symptoms, the service manager stated that “the suspension is normal,” noted that there were “no Check Control Messages,” and reported that they “compared to another X3 M50 and vehicle feels the same.” No repairs were performed. Safety Concern: The side to side oscillation affects vehicle stability and driver control during low speed maneuvers, especially in confined areas such as parking garages. I am submitting this complaint to request further investigation into whether this suspension behavior is normal for this model or indicative of a potential defect in the suspension damping or stability control calibration. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Vehicle: 2025 BMW X3 30 xDrive | VIN: [XXX] | Dealer: Weatherford BMW of Berkeley | No crash, no injury Complaint narrative: My 2025 BMW X3 30 xDrive (VIN [XXX]) has an open, active safety recall. BMW of North America has confirmed to me in writing (Executive Customer Care case #[XXX], most recently June 18, 2026) that the remedy parts are not available, and it has provided no repair date or estimated availability. I first raised this in April 2026; it remains unrepaired. Because of the open recall, BMW Financial Services will not allow me to transfer or pay off my lease, yet I continue to be charged $631.98 per month for a vehicle I cannot transfer and that has an unremedied safety defect. BMW has not offered a loaner, interim payment relief, or a repair timeline. I am requesting that NHTSA note the extended unavailability of the recall remedy for this vehicle. The 2025 X3 30 xDrive is subject to multiple BMW safety recalls; at least one campaign — NHTSA 25V202000 (starter-generator / positive battery cable; risk of engine stall and fire) — was issued with an interim notice stating the remedy was not yet available and that a second notice would follow once the remedy is ready, which is consistent with what BMW has told me. I am seeking confirmation of the exact open campaign on my VIN and a timely, free remedy as required by federal law. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Subject: Supplemental Evidence for Existing NHTSA Complaint / ODI #11711973 I am submitting supplemental safety information for my existing NHTSA vehicle safety complaint, ODI #11711973, involving my 2025 BMW X3, VIN [XXX] . Since filing, I had an additional BMW of Sterling visit/repair estimate dated April 22, 2026, mileage 17,628, RO #[XXX]. The dealer documented additional concerns including rough acceleration/jerking during the first drive of the day, intermittent A/C not blowing cold air and randomly blowing warm air, tire/wear concerns, left rear tire tread/screw concern, rear tires worn to 3mm, and alignment recommendation. This information supplements my existing complaint involving repeated unresolved safety/electrical/system concerns, including steering/safety concerns, driver-assistance/cruise-control malfunction, tire-pressure/tire-detection issues, key/door/alarm detection issues, HVAC/defrost malfunction, and unintended movement/self-activation concerns. Please add this information and the attached repair estimate/photos/videos to ODI #11711973. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The headlights have a shadow half way down the windshield making it very difficult to see at night. We don't feel safe driving when it is dark out. We took it to the dealer the end of January they saw what we were talking about. One of the foreman drove it home at night. He saw what we were talking about but gave no solutions. We took it in again the shop foreman adjusted the headlights up. We drove it at night. The adjustment did not help. I have been in contact with BMW of North America. They have offered no solution.
The contact's husband owns a 2025 BMW X3. The contact stated that on multiple occasions while retrieving items out of the vehicle's liftgate, the liftgate door would independently shut while an individual was there. The contact stated that on one occasion, the liftgate door had pinned her against the vehicle and the contact used excessive force to open the liftgate. The contact had taken the vehicle to the dealer on three separate occasion; however, they failed to duplicate the failure after each visit. The contact stated that she fears using the vehicle due to the liftgate failure. The vehicle was not repaired. The contact made multiple attempts to reach the manufacturer; however, both the contact and the manufacturer repeatedly missed each others phone calls. The contact eventually sent an email to the manufacturer; the contact had yet to receive a response to his email. The failure mileage was 1,500.
While actively driving at speed, the vehicle's Driving Assistance Professional Package (DAPP) completely deactivated without warning. This caused an immediate, unexpected loss of both adaptive cruise control and active lane-keeping steering assistance, requiring sudden manual emergency intervention to maintain control of the vehicle and avoid a collision. This is a severe safety defect. The vehicle has been presented to an authorized BMW dealership twice for this exact failure. It is currently on its second repair attempt and has been out of service for about 30 consecutive days. It is stilll in the shop. The dealership and manufacturer have been unable to permanently resolve this electronic/steering system malfunction. Additionally, they gave me another 2025 BMW X3 VIN [XXX] which experienced the same problem yesterday 3/28/2026 while I was driving about 35 miles per hour on the freeway. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
While actively driving at speed this loaner vehicle, the vehicle's Driving Assistance Professional Package (DAPP) completely deactivated without warning. This caused an immediate, unexpected loss of both adaptive cruise control and active lane-keeping steering assistance, requiring sudden manual emergency intervention to maintain control of the vehicle and avoid a collision. This is a severe safety defect. The vehicle has been presented to an authorized BMW dealership twice for this exact failure. It is currently on its second repair attempt and has been out of service for over 20 consecutive days. The dealership and manufacturer have been unable to permanently resolve my personal vehicle this electronic/steering system malfunction.
On Feb. 25th, 2026, while driving at high speeds (about 45 mph), the vehicle suffered a sudden and total loss of motive power. Diagnostic reports(DIACODE: D6121_00000000_01_901) later confirmed a failing 12V battery system with only 37% startability limit. This critical electrical failure coincided with the engine stalling, which resulted in the immediate impairment of electronic power steering and brake assist. This made the vehicle extremely difficult to control safely, creating a life-threatening emergency. Despite being a 2025 model with only ~11000 miles, the dealership has failed to provide 48B system diagnostic and root cause upon request and the vehicle has been out of service for over 20 days.
When using the headlights there is a shadow across the top half of our windshield. The dealership was not able to fix, they acknowledged they could see what we are referring to. They are going to file a report with BMW. I do not know what to do in the meantime. This is our main transportation. This definitely needs a safety recall.
After driving car a few minutes with the heated seats “on”, the driver’s seat became extremely hot. Driver burned finger upon checking the seat and a hole was burned through the seat upholstery. No warning lamps or messages appeared. We were concerned for further overheating or possible fire. Car has been at A & L Dealership, Monroeville, PA, since November 28, 2025. A & L Dealership notified us the vehicle had “short circuit in wiring”.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.