2016 BMW X3
5 recalls and 82 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN5 recalls and 82 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler may leak internally, causing coolant to mix with diesel engine soot, which could result in smoldering particles and a melting intake manifold.
Remedy: Dealers will replace the EGR cooler and inspect the intake manifold, replacing it as necessary, free of charge. This recall includes all vehicles previously recalled under 18V-755. Vehicles previously recalled under 18V-755 will need to have the new remedy performed for this recall. An interim owner notification letter was mailed on January 18, 2022. The remedy is expected to be available in June 2022. Owner notification letters were mailed on July 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.
Remedy: Dealers will replace the high-pressure fuel pump, free of charge. Owner notification letters were mailed on January 14, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR cooler leaks internally, the coolant can mix with diesel engine soot. The high EGR temperatures may result in these particles possibly smoldering and melting the intake manifold.
Remedy: BMW will notify owners, and dealers will inspect and replace the EGR cooler as necessary. If a leak has already occurred, the engine intake manifold will also be replaced. These repairs will be made free of charge. The recall began May 13, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2011-2017, X3 sDrive28i, X3 xDrive28i and X3 xDrive35i, vehicles manufactured July 2, 2010 to April 14, 2016, 2015-2017 X3 xDrive28d vehicles manufactured March 10, 2014 to March 31, 2016, and 2015-2017 x4 xDrive28i, X4 xDrive35i and X4 xDriveM40i vehicles manufactured March3, 2014 to April 15, 2016. The affected vehicles have lower anchor bars for securing child restraint seats that may become damaged when using the European-ISOFIX-type, rigid-style connector, child restraint system.
Remedy: BMW will notify owners, and dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body, free of charge. The recall began on July 13, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing failure, the protection of the two outer headrests in the second row is reduced. In the event of a collision or accident, passengers could be injured. In addition, headrest parts may become exposed and also cause serious injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Damaged brake discs may have been fitted to the front axle. This can lead the brakes to fail when a heavy load is placed on the wheel concerned, increasing the risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Failure to bolt the plus voltage (B+) cable tightly enough to the starter generator may result in contact problems and an increase in contact resistance at the bolted connection. This may in turn lead to local overheating and the vehicle catching fire or to the engine stalling while the vehicle is coasting. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The steering system sensor may malfunction causing an unintended steering movement of the vehicle. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The vehicles concerned have already been modified in connection with the recall code 0051960500. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion, and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver's airbag inflator propellant may deteriorate over time. If activated during an accident, excessive internal pressure may cause the inflator to burst, and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
MY 8-YEAR OLD DAUGHTER WAS SITTING ON REAR PASSENGER SIZE SEAT ON A BOOSTER SEAT WITH SEAT BELT ON. SHE FIRST PLAYED WITH MY SON WHO WAS SITTING ON A READ DRIVER SEAT ON A CAR SEAT. THEN SHE FELL ASLEEP. IN THIS PROCESS THE SEAT BELT SOME HOW GOT WRAPPED AROUND HER. WHEN WE STOPPED FOR A BATHROOM BREAK WE UNBUCKLED THE BELT TO FIND OUT THAT THE BELT WAS WRAPPED AROUND HERE AND WE COULD NOT UNWRAP IT. THE MORE WE TRIED TO PULL OUT THE MORE TIGHTER IT GOT. SHE WAS IN SEVERE PAIN. WE HAD TO BORROW A SCISSOR FROM THE GAS STATION TO CUT THE BELT.SEE THE PIC WITH THE SCAR. SHE WAS IN PAIN FOR NEXT FEW DAYS. WE TOOK THE CAR TO DEALER AND THEY SAID THAT BELT WORKED AS DESIGNED. THE CHILD LOCK KICKED IN AND THE LOCK WONT RELEASE UNTIL THE BELT GOES ALL THE WAY IN. BELT COULD NOT GO ALL THE WAY IN BECAUSE IT WAS WRAPPED AROUND HER. THERE SHOULD HAVE BEEN SOME MANUAL BUTTON/SWITCH TO RELEASE THE BELT.
SEATBELT PRETENSIONER FAILING TO HOLDBACK PASSENGER ON DECCELLERATION ON EXIT RAMP AT 4 DEGREES INCLINE OR DECLINE FROM 65 TO ZERO ON CONTROLLED DECCELERATION
The contact owned a 2016 BMW X3. The contact stated that while parking in the garage, the warning message "engine overheated" had displayed, but the temperature gauge displayed a normal temperature reading. The contact noticed smoke coming from under the hood before entering the home, along with a strange sound. Moments later, the contact returned to the garage and discovered flames coming from under the front end of the vehicle. The contact quickly drove the vehicle out of the garage onto the driveway. The vehicle became engulfed in flames, and the fire department was called to the scene and extinguished the flames. During the fire, the vehicle was destroyed, and the driveway and parts of the lawn were damaged. No injuries were reported. A fire and police reporter was taken to the scene. The cause of the failure was not determined. The manufacturer and local dealer were not yet contacted. The contact was informed that the VIN was not included in the NHTSA Campaign Number: 24V608000(ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM). The failure mileage was 220,000.
The contact owned a 2016 BMW X3. The contact received notification of NHTSA Campaign Number: 21V907000 (Fuel System, Diesel) however, the part to do the recall repair was not yet available. The contact stated that the dealer had previously performed an engine inspection and pressure test for the coolant system due to coolant loss with the low coolant warning light illuminated. The contact had added a quart of coolant. The contact stated that while his wife was driving at an undisclosed speed, the vehicle lost motive power with a loss of power warning message displayed. The contact's wife was able to pull over on the shoulder of the roadway and noticed there was smoke coming from underneath the hood before it caught fire. The contact's wife was able to safely exit the vehicle. The fire department arrived on the scene and was able to extinguish the fire. Police and fire department reports were filed. The vehicle was towed to a tow yard and then to the contact's residence. The dealer was made aware of the failure and referred the contact to the manufacturer. The vehicle was not yet deemed totaled by the insurance company. The manufacturer was made aware of the failure and informed the contact that an inspector would perform an inspection to determine the cause of the fire. The failure mileage was approximately 88,500. VIN tool confirms parts not available.
ON 8/30/20,AFTER SITTING FOR AN HOUR AFTER A LONG DRIVE, THE CAR BURST INTO FLAMES AND BURNED DOWN TWO ADJACENT HOMES. THE CAR WAS PARKED FOR AN HOUR BEFORE IT STARTED TO BURN.
TL* THE CONTACT OWNS A 2016 BMW X3. WHEN PARKING THE VEHICLE, THE RPMS INCREASED WHEN THE BRAKE PEDAL WAS DEPRESSED. AS A RESULT, THE VEHICLE CRASHED INTO A TREE. THERE WERE NO WARNING INDICATORS ILLUMINATED. THERE WERE NO INJURIES AND A POLICE REPORT WAS NOT FILED. THE VEHICLE WAS TOWED TO BMW OF ONTARIO (1301 AUTO CENTER DR, ONTARIO, CA 91761, (909) 402-3052) TO BE DIAGNOSED, BUT THE RESULTS WERE NOT DISCLOSED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 40,000.
WHILE BRAKING TO SLOW THE VEHICLE TO A STOP BEHIND TRAFFIC AT A RED LIGHT, AFTER COMING OFF A HIGHWAY EXIT RAMP, THE BRAKES FAILED TO RESPOND TO ADDED PRESSURE APPLIED TO BRING THE VEHICLE TO A COMPLETE STOP. THE BMW X3 KEPT MOVING FORWARD, AND COLLIDED, AT VERY SLOW SPEED, WITH THE STOPPED VEHICLE AHEAD. I QUICKLY CHECKED TO ENSURE THAT MY FOOT WAS PROPERLY ON THE BRAKE PEDAL AND DEPRESSED THE PEDAL AGAIN, WHICH AGAIN FAILED TO BRING THE VEHICLE TO A COMPLETE STOP, RESULTING IN SECONDARY CONTACT WITH THE VEHICLE AHEAD. WHEN ATTEMPTING TO MOVE THE VEHICLE TO THE SIDE OF THE ROAD, THE ELECTRONIC TRANSMISSION REPEATEDLY JUMPED INTO PARK FROM DRIVE, REQUIRING ME TO TURN OFF THE IGNITION AND RESTART THE VEHICLE BEFORE I COULD SAFELY MOVE IT TO THE SIDE OF THE ROAD.
2016 BMW X3 XDRIVE28 I I PULLED INTO A FRIEND'S DRIVEWAY AND APPLIED THE BRAKES APPROXIMATELY 2 FEET FROM THE CLOSED GARAGE DOOR. MY CAR "LEAPT " INTO THE SIDE OF THE HOUSE, THEN CAREENED INTO THE GARAGE DOOR. THE CAR ACCELERATED WITH SUCH FORCE THAT BOTH AIRBAGS WERE DEPLOYED. I AM SURE THAT I DID NOT HIT THE ACCELERATOR BY ACCIDENT. AT THE CLOSE PROXIMITY TO THE GARAGE I COULD NOT HAVE ACCELERATED TO CAUSE SUCH A VIOLENT CRASH THAT DEPLOYED THE AIRBAGS. MY CAR WAS DECLARED A " TOTAL LOSS ". THIS WAS ONE OF THE MORE FRIGHTENING EXPERIENCES OF MY LIFE. IT ALL HAPPENED IN A SPLIT SECOND. I AM THANKFUL THAT I WAS NOT IN TRAFFIC.
I HAD PULLED INTO A PARKING LOT TRAVELING VERY SLOWLY THEN TURNED LEFT INTO A PARKING SPACE WITH MY FOOT ON BRAKE BUT JUST BEFORE COMING TO A COMPLETE STOP THE CAR SUDDENLY SURGED FORWARD AT GREAT SPEED, LEAPT OVER A CONCRETE "LOG" DESIGNED TO STOP A VEHICLE AND CRASHED INTO A CONCRETE WALL 3 FEET IN FRONT OF THE CAR. MY FIRST REACTION WAS TO LIFT MY FOOT FROM THE PEDAL THINKING I HAD DEPRESSED THE ACCELERATOR IN ERROR, HOWEVER THE CAR INCREASED SPEED AND I JUST HAD TIME TO GLANCE DOWN AND ASCERTAIN THAT MY FOOT WAS ON THE BRAKE BEFORE THE CAR PLOWED INTO THE WALL, DEPLOYING THE AIR BAGS. THE WHOLE INCIDENT WAS OVER IN 2 - 3 SECONDS AND THE CAR WAS PERFECTLY ALIGNED IN THE PARKING SPACE EXCEPT FOR THE FRONT WHEELS BEING THE WRONG SIDE OF "LOG". THE X3 WAS NOT DRIVE-ABLE AND WAS TOWED ON A FLATBED TO THE BMW SERVICE CENTER AND SUBSEQUENTLY DECLARED A COMPLETE WRITE-OFF BY THE INSURANCE COMPANY. I AM HORRIFIED BY THE FACT THAT MANY CAR MANUFACTURERS ARE AWARE OF THIS SUDDEN UNINTENDED ACCELERATION PROBLEM YET, BECAUSE IT IS DIFFICULT TO PROVE, USUALLY PUT ALL REPORTED INCIDENTS DOWN TO OPERATOR ERROR, THEREFORE ABSOLVING THEM OF RESPONSIBILITY. MY INSURANCE COMPANY IS NOT INVESTIGATING THE CAUSE, NEITHER IS BMW. WHY IS THAT? IS IT GOING TO TAKE A FATALITY BEFORE SOMETHING IS DONE TO RECTIFY THIS VERY REAL PROBLEM. BELOW IS THE CONTACT DETAILS FOR THE CHUBB CLAIMS EXAMINER WHO IS WILLING TO SHARE HIS REPORT AND PHOTOS SHOULD NHTSA DECIDE TO INVESTIGATE. SAM JACKSON 800 432 2482 EXT 0860 SAM.JACKSON@CHUBB.COM CLAIM # 77140147
I WAS IN TRAFFIC AT A LIGHT AND MOVING SLOWLY BEHIND CAR IN FRONT OF ME. I WAS BRAKING AND THE CAR JUST KEPT GOING FORWARD. I HIT THE CAR IN FRONT OF ME. THEN I HIT IT AGAIN AS IT MOVED FORWARD AND A THIRD TIME AS IT MOVED FORWARD. ALL THE TIME I WAS HITTING THE BRAKES. THE CAR SEEMED TO BE ACCELERATING.... I FINALLY HAD TO PULL OFF ONTO A SIDEWALK AND PUT THE CAR IN PARK TO GET IT TO STOP. THE POLICE WHO ARRIVED ON THE SCENE ALSO TESTED THE BRAKES AND SAID THEY WERE NOT WORKING. LATER WHEN THE CAR WAS TOWED THE BRAKES WORKED? I DO NOT WANT TO DRIVE THIS CAR WITHOUT THE BRAKES BEING FIXED. I AM WAITING FOR NEWS FROM BMW ON THE SITUATION. VERY SCARY.... *TR
I WAS SLOWING TO A STOP AT A RED LIGHT ON A VERY BUSY STREET AND THE BRAKES IN MY X3 FAILED. INSTEAD OF SLOWING THE CAR DOWN - IT SPED UP AND CRASHED INTO THE CAR IN FRONT OF ME. I PUSHED DOWN ON THE BRAKES AND THE CAR JUMPED FORWARD. THERE IS MINIMAL DAMAGE TO THE FRONT BUMPER BUT I AM SCARED TO GET BEHIND THE WHEEL AGAIN.
THIS ALL HAPPENED THE SAME DAY BEGINNING ABOUT 10AM ON 12/29/15. THE CAR IS A 2016 BMW X3 THAT I BOUGHT NEW IN AUGUST 2015. 1.SLOWED TO BRAKE AT A RED LIGHT. I WAS THE FIRST CAR AT THE INTERSECTION. AS I PUSHED THE BRAKE TO COME TO A FULL STOP, THE CAR LURCHED INTO THE INTERSECTION. I LOOKED DOWN AND SAW MY FOOT ON THE BRAKE AND THE CAR IN DRIVE. FORTUNATELY, THERE WAS NO CROSS TRAFFIC. I SLOWLY ACCELERATED AND CONTINUED WITH MY ERRAND. 2. I STOPPED AT A BUSINESS WITH A PARKING LOT. I SLOWLY DROVE THROUGH THE LOT AND FOUND A OPEN SPOT. EACH PARKING SPOT HAD A CONCRETE "STOP BAR". I SLOWLY TURNED INTO THE SPOT. WHEN I PUSHED ON THE BRAKE FOR A FULL STOP, IT LURCHED FORWARD OVER THE "STOP BAR" AND HIT THE CAR PARKED DIRECTLY IN FRONT OF ME. I PUT THE CAR IN REVERSE AND WAS ABLE TO GET BACK OVER THE "STOP BAR". I LOOKED CAREFULLY AT BOTH CARS AND COULD FIND NO DAMAGE ON EITHER ONE. 3. I DROVE SLOWLY DIRECTLY TO THE BMW DEALERSHIP WHERE I BOUGHT THE CAR ON AUGUST 13, 2015. TWO DIFFERENT SERVICE TECHS DROVE IT AND THEY RAN ALL POSSIBLE SYSTEM TESTS ON IT. THEY COULD FIND NOTHING WRONG. 4. I WAS SO AFRAID TO DRIVE IT, I TRADED IN THE 2016 X3 FOR A 2016 X1 THE SAME DAY - 12-29-15. BOTH WERE NEW WHEN I BOUGHT THEM. THE X3 HAD 2,500 MILES ON IT WHEN I TRADED IT IN. I DROVE 139 DAYS. 5. MY CONCERN IS THAT THE X3 WILL BE SOLD AS A USED CAR WITHOUT ANY FURTHER INVESTIGATION INTO THE PROBLEM. 6. THE NHTSA REPORTED THAT 88,000 BMWS (VARIOUS MODELS INCLUDING THE X3) WERE RECALLED IN 2014 FOR A BRAKE PROBLEM. I GAVE THIS INFORMATION TO THE DEALERSHIP. NHTSA CAMPAIGN NUMBER #14V627000, NHTSA ACTION NUMBER: PE13030. I DO NOT KNOW IF THIS PROBLEM IS THE SAME PROBLEM I HAD. NHTSA COMPLAINTS LIKE MINE: 4 OUT 8 COMPLAINTS FOR 2014 X3 4 OUT 8 COMPLAINTS FOR 2015 X3 0 OUT OF 1 COMPLAINT FOR 2016 X3
While driving on a two-lane 40 MPH road in the left lane the vehicle suddenly lost power, stopped in traffic, and displayed a transmission warning message. Multiple warning lights were "on" and the car would not restart. Additionally, the vehicle would not come out of "Park." Occupants needed to await police who stopped traffic in order for occupants to be able to exit the vehicle safely. The vehicle was towed to BMW of Atlantic City located at [XXX]. Technician found ground missing at EGS, inspected ground strap on transmission and found it severely corroded. Technician replaced ground strap and vehicle was repaired. Was advised by dealer service department that when this situation occurs, the only way to get the transmission into neutral in an emergency is to disconnect the transmission linkage under the vehicle. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2016 BMW X3. The contact stated that while driving 55 MPH and depressing the accelerator pedal, the vehicle stalled with the drive train warning light illuminated. A dealer was contacted. The vehicle was taken to a dealer where it was diagnosed and determined that the high-pressure and the pressure-regulating valves needed to be replaced. The high-pressure fuel pump was replaced three times. The contact stated that the failure had occurred on several occasions. The contact associated the failure with NHTSA Campaign Number: 21V586000 (FUEL SYSTEM, DIESEL); however, the VIN was not included in the recall. The manufacturer was notified of the failure. The failure mileage was 98,773.
Key Details of BMW EGR Recall: • Affected Models: Primarily 2013-2018 BMW 328d/xDrive, 535d/xDrive, 740Ld, X3 xDrive28d, and X5 XDrive35d. • The Problem: The Exhaust Gas Recirculation (EGR) cooler may leak coolant internally, which can mix with soot to form flammable deposits, potentially leading to a Fire I was driving and my car started to smoke out of engine compartment I pulled over and waited called my husband and drove it back home. Took it to a shop and they are saying it’s my erg leaking internally and need it replaced along with the intake manifold. I looked up recalls and only the diesel one is on recall for the exact same issue,
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.