2019 BMW X1
3 recalls and 11 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN3 recalls and 11 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X1 sDrive28i, X1 xDrive28i, 2019 X2 xDrive28i, MINI Cooper S Convertible, Countryman, and John Cooper Works Countryman vehicles. The steering gear tie rod may have been assembled incorrectly, which may result in excessive wear of the tie rod end, eventually causing it to break.
Remedy: BMW will notify owners, and dealers will inspect the vehicles and replace the tie rods and ball joints as necessary, free of charge. The recall began October 11, 2019. Owners may contact BMW customer service at 1-800-525-7417 or MINI customer service at 1-866-825-1525.
BMW of North America, LLC (BMW) is recalling certain 2016-2019 X1 sDrive28i and X1 xDrive28i vehicles. In the event of a crash where the occupants head contacts the B-pillar, the pillar may not absorb an adequate amount of the impact. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 201, "Occupant Protection in Interior Impact."
Remedy: BMW will notify owners, and dealers will replace the vertical trim pieces on the upper portion of the interior B-Pillars, free of charge. Interim letters notifying owners of the safety risk were mailed July 1, 2019. Second notices will be sent as parts become available, starting on September 27, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X1 sDrive28i and X1 xDrive28i vehicles. Contaminated hardware may cause the attachment brackets of the taillight housings to crack, causing the lights to loosen or possibly detach from the vehicle.
Remedy: BMW will notify owners, and dealers will properly secure the taillights, free of charge. The recall began March 28, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The seatbelts in the second row may not have been manufactured correctly and could cause the car-sensitivity sensors to fail. This could reduce the protective effect of the seatbelts and lead to injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat belts of the car were not manufactured correctly. In the event of a collision or accident, the restraint function of the seat belts may be reduced and may not provide the necessary protection. As a result, there may be an increased risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cell modules in the vehicles concerned were not produced in accordance with the specifications, which may cause the module frame to fail. This may lead to a shutdown of the high-voltage system and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The material used for the B-pillar reinforcement plates is inadequate. This can alter the crash characteristics, leading to an increased risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The front left seat's height adjustment mechanism may have been incorrectly riveted, potentially compromising the seat's structural integrity. In an accident, this could have a negative impact on the restraint system and increase the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat recliner adjuster may not be correctly welded, which could cause the backrest not to lock. If it doesn't lock, the seatback might not stay secure in a collision, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
The car is equipped with Driving Assistant. BMW Active Driving Assistant is a collection of driving assistance and collision avoidance technologies. Active Driving Assistant includes forward-collision warning with pedestrian detection, low-speed automatic emergency braking, lane-departure warning, blind-spot warning, and rear cross-traffic warning. BMW Active Driving Assistant systems help a driver to avoid a collision. The package includes advanced driving assistance systems (ADAS) that are increasingly common as standard equipment for mainstream and luxury brands alike. Forward-collision warning monitors for obstacles ahead, and with Active Driving Assistant the technology can also identify pedestrians in the vehicle’s path. If the driver fails to brake, the automatic emergency braking system engages to stop or slow the BMW before impact. Be sure to understand that with Active Driving Assistant, the automatic braking works only at lower city speeds. On faster-flowing highways and freeways, the driver must respond to potential collision situations. ( https://www.jdpower.com/cars/shopping-guides/what-is-bmw-active-driving-assistant ). The car was involved in a rear end collision striking the vehicle in front of it on May 28, 2021 at approx. 11:36 AM (picture attached). The car was on York Road near [XXX] being driven in heavy lunch-hour traffic when the accident occurred. My wife, [XXX], was driving the vehicle. She is named on my auto insurance policy. She was taken to the hospital via ambulance to Belvedere/Sanai Hospital at 2401 West Belvedere Avenue, Baltimore, MD 21215. She sustained a broken sternum, major bruising and lacerations on her arms and legs. The vehicle was towed to a holding yard (Linhard's Towing, 11013 York Road, Cockeysville, MD 21030) by the police due to the air bags deploying. The steering wheel, drivers lower leg and passenger side curtain air bags deployed. INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).
My car began shaking at low speeds when turning. Brought it to a mechanic to investigate and they performed a recommended manufacturer alteration on the car related to rear differential vent. That did not fix the issue and mechanic said a full rear differential replacement was required and it was a safety issue. If the rear differential failed while driving it could cause a serious accident. He suggested that the manufacturer knew there was an issue because they had this upgrade in their service literature. My concern is that the manufacture knew of a potential safety defect and did not initiate a recall. My car has 58k miles which in my opinion should not put it at risk for major powertrain failures.
A recall was issued for similar vehicles (X1) but ended with the 2018 model year (Recall 24V-608). This issue continues to be present in the 2019 model year. The thermostats in subsequent year models continue to leak, presenting a hazard. An engine warning lamp triggered an inspection at BMW Honolulu which identified the thermostat leak issue requiring “immediate attention.” In addition, BMW engine mounts in the same model year vehicle have failed in less than 6 years of operation which could present a significant operational hazard. This issue was identified at the same time as the thermostat issue referenced previously. A similar dealer recommendation of “immediate attention,” suggests the severity of the issue. This vehicle has been properly serviced at BMW Honolulu since it was purchased as a certified pre-owned vehicle from BMW Honolulu on October 22, 2022.
The contact owns a 2019 BMW X1. The contact stated that the emergency call error light illuminated the instrument panel. In December of 2024, the contact received notification regarding an extended warranty coverage for the battery to be replaced. The contact was unable to immediately take the vehicle to the dealer due to other reasons. Once the contact was able to take the vehicle to the dealer, the contact was informed that the time frame for the Battery Extended Warranty coverage for the replacement of the battery had expired. The vehicle was not repaired. The manufacturer was informed of the failure. The manufacturer opened a case and decided to cover 50% of the cost for the repair. The failure mileage was 44,770.
SOS Malfunction For the past two years, I have received a notice on my dashboard that there is a problem with the Emergency Call System. However, the message appears intermittently for weeks or months at a time.211/400
The contact owns a 2019 BMW X1. The contact stated that the vehicle was taken to the dealer for an oil change and was informed that the vehicle was leaking coolant. The contact stated that while the vehicle was idling, the contact became aware that there was coolant on the ground underneath the vehicle. There were no warning lights illuminated. The dealer determined that the water pump had failed. The dealer confirmed that the failure was related to NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not included. The water pump was replaced. The manufacturer was informed of the failure and opened a case. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 39,673.
Emergency call (SOS) system is malfunctioning. This prevents the vehicle from communicating if an accident happens. BMW service stated the problem could be caused by water leaking on to the telematics control unit from the shark fin antenna, which would require replacing the unit. The TCU is located under the head liner beneath the shark fin. The head liner has to be removed to diagnosis and replace the TCU. This is poor engineering placement makes the fix difficult and very costly. The life saving feature is compromised!
The moonroof spontaneously exploded while traveling on interstate highway at 65 mph. I was in the open and no vehicles were near me. I was showered in glass but uninjured because I was wearing a brimmed hat. I could have but did not lose control of the vehicle. There was no warning or other indicator of the problem. The dealership inspected and replaced at no cost to us. No police or insurance involvement.
MY 2019 X1 WITH 17000 MILES ON IT SUDDENLY AND WITHOUT WARNING SHUT DOWN IN THE MIDDLE OF THE HIGHWAY. IT WOULD NOT START BACK UP AND THE ENTIRE DASHBOARD LIGHTS WERE BLINKING WITH NO RHYME OR REASON. I WAS NOT EVEN ABLE TO GET OUT OF THE LANE ONTO THE SHOULDER TO A SAFE AREA. THIS COULD HAVE BEEN DEADLY AND IT WAS TERRIFYING.
TL* THE CONTACT OWNS A 2019 BMW X1. THE CONTACT RECEIVED A RECALL NOTICE FOR NHTSA CAMPAIGN NUMBER: 19V349000 (STRUCTURE). THE CONTACT CALLED ELMHURST BMW (500 W LAKE ST, ELMHURST, IL 60126) AND WAS INFORMED THAT THE PARTS WERE NOT AVAILABLE AND THE DATE FOR THE PARTS TO ARRIVE WAS UNKNOWN. THE CONTACT SPOKE WITH THE MANUFACTURER AND WAS PROVIDED THE SAME INFORMATION AS THE DEALER. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
TL* THE CONTACT OWNS A 2019 BMW X1. THE CONTACT RECEIVED A RECALL NOTICE FOR NHTSA CAMPAIGN NUMBER: 19V349000 (STRUCTURE). THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. HENDRICK BMW NORTHLAKE (10720 NORTHLAKE AUTO PLAZA BLVD, CHARLOTTE, NC 28269, (704) 321-8126) WAS CONTACTED AND CONFIRMED THAT THE PARTS WERE NOT AVAILABLE FOR THE RECALL REMEDY. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE AND WAS NOT ABLE TO CONFIRM WHEN THE PARTS WERE TO BECOME AVAILABLE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.