2025 Audi Q8
2 recalls and 3 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN2 recalls and 3 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
The contact owns a 2025 Audi Q8. The contact stated that while driving at 25-30 MPH, she crashed into the rear of a pick-up truck towing a boat on a trailer. The contact did not notice that the vehicle in front was coming from a stop, which caused the accident. During the crash, the engine of the boat detached, causing damage. The contact was concerned that the Audi Pre Sense Front Braking feature failed to engage, which could have prevented a crash. The air bags did not deploy. The contact did not sustain any injuries. No medical attention was required. The insurance company was notified of the incident, and the inspection was pending. A dealer was contacted and was informed to call the manufacturer. A police report was filed. The manufacturer was not notified of the failure. The approximate failure mileage was 11,700.
On July 4, 2026 in the early evening, I was driving in the HOV lane of the freeway when the engine abruptly lost power. There was a warning light that came onto the dashboard but I did not see what it said as I was solely concerned about moving safely off to the shoulder in moderate traffic. Once I pulled to the shoulder, I restarted the vehicle and was able to drive home safely. What put my wife and I in great danger was the vehicle losing power without warning when driving on the freeway and having to navigate safely to the shoulder in traffic without having acceleration power. I took the vehicle into the Audi Ontario dealer on July 6 for a rearview camera recall notice and to address the engine problem. I did not drive the vehicle after the July 4 incident but the loss of power did not happen again after I restarted the engine nor when I drove it to the dealer on July 6. The dealer notified me the next day that they could not recreate the engine problem and that the engine automatically turns off after coming to a stop. I explained I had not come to a stop, that I was driving at about 80 MPH with both hands on the steering wheel. I asked about what trouble codes they found and if I could have a print out since this was a safety concern and the vehicle only has 1,500 miles on it. The loss of propulsion was not the auto turn off when coming to a stop. They kept the vehicle for further review and I have not heard back as of July 14. I called to make inquiry and they are supposed to call me back. My concern is not only for me, but also for anyone that has this vehicle year, make, and model - the next person may not be so lucky to navigate to safety if it happens to them.
I am writing to formally document an urgent and ongoing safety issue with my new Audi Q8 (VIN [XXX] rrently has fewer than 1,100miles. On my recent visit to my local Audi authorized dealer's service department (Tuesday, 4/21/2026), I brought the vehicle in for a “central lock malfunction” warning and was advised that the issue had been resolved. However, the next morning the same error reappeared. This warning has been present intermittently, beginning the day I purchased the vehicle at 0 miles. More critically, this malfunction is affecting the driver-side door’s ability to open from the inside. On multiple occasions, I have been unable to exit the vehicle without repeated attempts. This presents a serious safety concern, as it temporarily prevents me from exiting the vehicle in a normal and timely manner. Given the nature of this issue, I want to clearly document that: - This is a safety-related defect impacting my ability to exit the vehicle - The issue was not resolved after the initial repair attempt - The problem has reoccurred immediately INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6) INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.
Volkswagen Group of America, Inc. (Audi) is recalling certain 2019-2026 vehicles. Please see the recall report for a complete list of models. A software error may prevent the rearview camera image from displaying as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Remedy: Dealers will update the software, free of charge. Owner notification letters were mailed January 14, 2026. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 90TV. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on December 23, 2025.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2025 Audi RS Q8, Audi Q8, Audi Q7, and Audi SQ8 vehicles. The driver and front passenger seat belt buckles may be missing a rivet that secures the buckle to the seat belt stalk.
Remedy: Dealers will replace both front seat belt buckles, free of charge. Owner notification letters were mailed December 3, 2025. Owners may contact Audi at 1-800-253-2834. Audi's number for this recall is 692K. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on November 14, 2025.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The high-pressure fuel pump may not be correctly affixed to the cylinder head. As a result, the connection between the pump and the fuel pipes may not be properly sealed. This may result in a fuel leakage, which could originate a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has a defect in the buckle and the anchorage of the seat belt, which may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries, in particular to the passengers of the front seats. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cell modules of the high-voltage battery could overheat during charging which can lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective welding seam on the front seat back frame can break in the event of an accident. As a result, the person sitting in the seat may hit their head on the B-pillar, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a problem with the screw connection, the push rod linking the brake pedal and brake booster may become disconnected, causing the foot brake to malfunction. This can result in the loss of vehicle control, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Overtightening of the screws connections on the brake hoses can lead the screws to break and brake fluid to start leaking. This can cause the failure of one brake circuit, reducing braking performance and compromising driving stability. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The side airbag is insufficiently secured to the front left-hand side of the seat frame. As a result, it may not be able to deploy correctly in the event of an accident, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.