2019 Audi Q8
5 recalls and 108 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN5 recalls and 108 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
SEATBELT APPARATUS AND SEAT DETACHED DURING REAR END MOTOR VEHICLE CRASH.
My alternator failed with "electrical malfunction" alerts until the car decided to shut down on the highway with my newborn and wife. The bigger issue is I'm being told there is a national shortage for this part with no ETA on receiving the part and that it could be MONTHS until they receive the alternator replacement.My car is in dealership since Dec 6 2022. Today is 01.10.2023
I own a 2019 Audi Q8 3.0 TFSI that has been regularly maintained and serviced through authorized Audi dealerships. The abnormal engine ticking/knocking did not suddenly begin at 91,000 miles. A similar noise could be heard earlier, but it was not identified by Audi service as an internal engine/piston problem. Because the vehicle continued to be serviced by Audi, I believed the sound was related to the fuel injectors or normal engine operation. At approximately 91,000 miles, the noise became noticeably worse. At 91,623 miles, Audi San Jose diagnosed the knocking as related to the engine pistons, classified it as requiring “IMMEDIATE ATTENTION,” opened Audi TAC case SF-1690700, and confirmed that all six pistons require replacement. Audi provided a repair estimate of $22,466.21. I have since learned that Audi has acknowledged a piston-skirt issue through an 8-year/80,000-mile limited warranty extension, and I have found numerous owners reporting similar piston knocking/piston-slap and major engine repairs. My vehicle is now beyond the 80,000-mile limit, but the noise existed earlier and was not recognized as a piston problem. Given the vehicle's Audi maintenance history and the failure of all six pistons, I am concerned this represents a premature engine defect rather than normal wear. I am reporting this so NHTSA can investigate similar failures, including those diagnosed after Audi's extended-coverage mileage limit, and the potential risk of major engine damage or loss of propulsion.
I have experienced multiple events in which the there is a central locking system malfunction which renders the fob, door lock button, and at times, the door handle nonfunctional and effectively traps occupants in the vehicle.
My car is a 2019 Audi Q8 3.0L V6 with only 41,831 miles. My emergency light went on and I brought it my locat Audi Dealer. The inspection revealed that the coolant pump was leaking internally, contaminating the entire vacuum system with coolant. This is not a maintenance failure or the result of owner neglect. It is a well-documented, inherent design defect in the EA839 3.0T engine platform that powers the 2019 Q8, a defect that Audi of America has acknowledged through multiple Technical Service Bulletins. Specifically, the EA839 water pump uses a vacuum-operated diaphragm to control coolant flow. When the pump's internal seals fail — as they predictably do — coolant migrates directly into the engine's vacuum system, contaminating components far beyond the pump itself. Industry experts and Audi forums alike describe this failure mode as inevitable on this platform: not a matter of if, but when. This is a design defect manifesting at a fraction of the mileage at which any reasonable owner would expect a cooling system component to fail. Audi of America has issued multiple TSBs addressing coolant pump failures on this exact engine platform, and previously extended warranty coverage for Q7 and Q8 vehicles, including those built during the same production window as the vehicle in question. Our concern is this issue can cause the engine to seize while driving and Audi's repair costs for this known issue have been quoted minimally at $5,519.76
I own a 2019 Audi Q8. The vehicle was in the dealership’s possession for approximately three (3) weeks for service. During that time, I was not informed of any significant mechanical concerns or issues. After retrieving the vehicle, it displayed an oil pressure warning while in operation. I immediately returned the vehicle to the dealership for evaluation. At that time, the dealership added oil (“topped off” the vehicle) and released it back to me without identifying or addressing the underlying cause of the warning. Following this, I made multiple attempts to have the vehicle properly diagnosed. I experienced difficulty obtaining assistance, including calls being disconnected, and I was not provided meaningful support or a thorough evaluation of the issue. Shortly after leaving the dealership, the vehicle began producing abnormal knocking noises and rapidly became unsafe to operate, requiring it to be towed. This situation presents a significant safety concern, as a sudden loss of power or drivability while driving can increase the risk of an accident, particularly in traffic conditions where maintaining speed is necessary. The condition has since been confirmed by a service provider as a major mechanical failure. Additionally, I have received documentation from the manufacturer indicating a known issue related to piston skirt defects associated with this vehicle. Despite the vehicle being in the dealership’s possession for an extended period, this issue was not identified, diagnosed, or addressed. I was also not provided clear assistance or guidance regarding potential warranty consideration related to this known issue. The vehicle is currently available for inspection upon request.
- Vehicle: 2019 Audi Q8, VIN [XXX] - Recall: Campaign 25V900 (90TV), Rearview Camera Software - Dealer: Audi Marin, 700 Francisco Blvd W, San Rafael CA, BAR# XXX - What happened: Recall attempted April 1, 2026. Technician logged Error 005A — communication failure with front driver assistance — on RO #XXX. Vehicle returned with rearview camera non-functional and driver assistance systems unavailable. - Current status: Dealer claims recall was performed. Rearview camera remains non-functional. The specific defect the recall addresses is present in the vehicle. - Dealer conduct: Dealer is attempting to charge $345 diagnostic fee for damage introduced during the recall attempt, claiming fault is pre-existing. No documentation supports pre-existing claim. Dealer's own intake inspection (January 15) recorded systems as functional. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Piston slap issues. The manufacturer is aware of the engine failure issues. They extended the engine warranty coverage from 50k to 80k miles knowing that the engine piston slap is an extreme issue but they won’t issue a total and complete recall. Owners have to identify that issue and have to specifically bring it in to have it bore scoped. If an owner isn’t aware of the noise and goes over the 80k miles then they are not held responsible for the complete and utter engine destruction.
Due to a leak in the rear axle that is connected to the differential, it caused the entire differential to fail. The bearing within the differential completely failed due to contaminated oil. The Q8s are known to have this occur but only in year models 2020-2022. My Q8 is a 2019 and Audi is aware of these issues given technical service bulletins available but doesnt want to take responsibility as this may be a continuing manufacturing issue arising. My vehicle only has 65k miles on it and Audi admits this is rare. Due to a misdiagnosis in June of 2025 (oil leak), Audi of Seaside Monterey caused the complete failure of the differential in December of 2025 by not doing a deeper diagnosis earlier to resolve the catastrophic failure. This is a safety concern and very expensive. A new differential costs $12k which has been expected to pay with no accountability. I am currently in an active case with Audi Seaside and the BAR to come to a resolution.
Dash Delamination: The leather dashboard is experiencing severe delamination and pulling away from the substrate, specifically in the area surrounding the passenger-side airbag. I believe this condition poses two significant safety risks: Airbag Interference: The detached and warped material may obstruct, delay, or alter the deployment path of the passenger-side airbag during a collision. Visibility and Distraction: This is a material defect, not wear and tear, and it poses a potential safety concern due to the reflection/glare on the windshield, as well as the distraction it causes while driving. Audi has acknowledged this "process weakness" and issued a Limited Warranty Extension (AWA-23-11) for 2019-2020 Q8 models. Despite this, my request for a safety-related repair was denied due to over 80K. The issue should be considered under mileage. I am requesting that the NHTSA investigate this defect to determine if it constitutes a safety non-compliance with FMVSS No. 208, as the structural integrity of the dashboard is vital for proper airbag performance. Thank you for your assistance in ensuring the safety of this vehicle.
I was having noise from engine and and I received a letter from extended warranty for an production defect in piston skirt. I sent my car for an evaluation in the Audi of Manhattan and I was told that my car falls under the engine piston skirt defect.i have the pictures from Audi Manhattan inspection that the engine piston walls have scratches.i was denied coverage under extension warranty because my car was over 1752 mile over the extension warranty.this is and production engine defect and can be stranded any time soon in the high way or any other street putting me and My family in danger and any other people driving around my car if that engine stops in the middle of the street. My car has 81752 miles and the extension warranty was up to 80000 mile or 8 years. The extension warranty came to late almost after 6 years ,as this is an known problem with those engines EA839 that is found in audis Porsche VW Tuareg ect.
Faulty water pump → allowed coolant to migrate into the vacuum lines (a place coolant should never be). •This led to turbo underboost faults (loss of power) even though the turbo itself is fine. •The contaminated vacuum system now requires replacement of the vacuum shut-off valve and possibly other vacuum components. •Because of how the parts are placed, the repair requires removing the front bumper, and once it’s reinstalled, the safety systems/sensors must be recalibrated.
engine begin to misfire and felt like it was ready to stall. within a minute of the misfiring the engine light came on. i was in the middle of highway struggling to get my vehicle to the dealership where purchased which thankfully was only 5mins away. tech heard noise coming from fuel pump near the engine and recommended replacing along with spark plug. after replacing tech advised me to take my vehicle to audi to perform a software update that will correct the misfire and prevent the MIL from illuminating. Got that done to only be presented with a knocking noise again a month or two later. Took my car back to Audi to run a full diagnostic to find out my engine is in early engine failure due to metal shavings in the oil filter. tech states shavings in the oil could originate from the fuel pump failure and the debris would have traveled into the engine oil causing critical damage to the engine.
being quality Engineer, why is this thing failing , and why are there no recalls? Amazing how they design these things to fail right at 50k miles. From what I hear, the audi's are notorious for not making these replacements simple and specialized tools are needed. I wouldn't change anything engine related unless you have issues like engine shaking, or rattling sounds stemming from the engine mounts. And if you get major work done, it is probably best to go to the dealers and pay the extra to make sure it will be taken care of properly! numerous same issues engine mounts after 50k MIles
There is helicopter type of noise coming from fuel pump and it’s increasing while driving very annoying and i feel steering is loose and I notice on google same problem with so many Audi q8 and sq8
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.
Volkswagen Group of America, Inc. (Audi) is recalling certain 2019 Audi Q8, Audi A7, and Audi A6 vehicles previously repaired under recall number 25V900. Due to a software error, the lane departure warning system may be deactivated.
Remedy: Dealers will update the software, free of charge. Owner notification letters were mailed March 13, 2026. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 90TW. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 6, 2026.
Volkswagen Group of America, Inc. (Audi) is recalling certain 2019-2026 vehicles. Please see the recall report for a complete list of models. A software error may prevent the rearview camera image from displaying as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Remedy: Dealers will update the software, free of charge. Owner notification letters were mailed January 14, 2026. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 90TV. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on December 23, 2025.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2019-2021 Audi Q8, and 2020-2021 Audi Q7 vehicles. A component inside the fuel pump may break, causing the fuel pump to fail.
Remedy: Dealers will replace the fuel pump, free of charge. Owner notification letters were mailed December 22, 2022. Owners may contact Audi's customer service at 1-800-253-2834. Audi's number for this recall is 20DR.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2019 Audi Q8 and 2017-2019 Audi Q7 vehicles. The bolt connecting the steering shaft to the steering gear may loosen, possibly resulting in a loss of steering control.
Remedy: Volkswagen will notify owners, and Audi dealers will inspect and, if necessary, replace the steering shaft bolt, as necessary, free of charge. The recall began March 31, 2020. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 36A1.
Volkswagen Group of America, Inc. (Audi) is recalling certain 2019 Q7, Q8, S5 Cabriolet, and S5 Sportback vehicles. The front shock absorber forks may develop cracks allowing the shock absorbers to loosen.
Remedy: Audi has notified owners, and dealers will replace the shock absorber forks, free of charge. The recall began March 18, 2019. Owners may contact Audi customer service at 1-800-253-2834. Audi's number for this recall is 40O4.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The high-pressure fuel pump may not be correctly affixed to the cylinder head. As a result, the connection between the pump and the fuel pipes may not be properly sealed. This may result in a fuel leakage, which could originate a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has a defect in the buckle and the anchorage of the seat belt, which may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries, in particular to the passengers of the front seats. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cell modules of the high-voltage battery could overheat during charging which can lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective welding seam on the front seat back frame can break in the event of an accident. As a result, the person sitting in the seat may hit their head on the B-pillar, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a problem with the screw connection, the push rod linking the brake pedal and brake booster may become disconnected, causing the foot brake to malfunction. This can result in the loss of vehicle control, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Overtightening of the screws connections on the brake hoses can lead the screws to break and brake fluid to start leaking. This can cause the failure of one brake circuit, reducing braking performance and compromising driving stability. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The side airbag is insufficiently secured to the front left-hand side of the seat frame. As a result, it may not be able to deploy correctly in the event of an accident, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.