2000 Dodge Avenger
Andere Dodge-Modelle
Ein bestimmtes Fahrzeug prüfen
Diese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsselnDiese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsseln5 Rückrufe und 31 Halterbeschwerden für dieses Modelljahr erfasst.
Fast alles hiervon beschreibt das Modelljahr, nicht das einzelne Fahrzeug. Nichts davon sagt etwas über Laufleistung, Unfälle oder Eigentum dieses Autos — keine Kennung kodiert das.
VEHICLE CAUGHT FIRE WHILE DRIVING. FIRE LOCATED ON LEFT SIDE OF ENGINE COMPARTMENT NEAR LEFT FRONT CORNER OF VEHICLE. POSSIBLE BATTERY POWER CABLE SHORT TO GROUND AT BATTERY MOUNT PLATE UNDER BATTERY. *NLM
2000 DODGE AVENGER ES. AIR CONDITIONER EVAPORATOR BLEW OUT. $1200 REPAIR BILL. MY MECHANIC SAID THERE HAVE BEEN NUMEROUS COMPLAINTS ABOUT THIS HAPPENING. *JB
THE PAINT IS FLAKING OFF THE CAR. APPEARS THAT THE WIND FROM GOING DOWN THE ROAD IS KNOCKING THE PAINT OFF. OR MAYBE THE SUN HAS SOMETHING TO DO WITH IT. THE ENTIRE TOP NEEDS RE-PAINTED. *JB
SENSOR IN TRANSMISSION QUIT WORKING. THE FIRST TIME I WAS DRIVING ON THE FREEWAY AND IT COMPLETELY LOST SPEED. I EXITED AND CAME TO A COMPLETE STOP. AFTER THAT, IT WOULD NOT SHIFT OUT OF FIRST GEAR. IT WAS REPAIRED BY A DEALERSHIP UNDER WARRANTY. THAT WAS AT AROUND 20000 MILES. TODAY, AT AROUND 42000 MILES, I STARTED THE VEHICLE AND WAS GOING ABOUT 20 MILES AN HOUR AND COULD FEEL THE TRANSMISSION BEGINNING TO SLIP. I STARTED INCREASING SPEED, AND IMMEDIATELY NOTICED THAT THE RPM'S WERE JUST CONTINUING TO GO UP. I HAVE SENT THE CAR TO A DEALERSHIP TO BE REPAIRED FOR THE SECOND TIME UNDER AN EXTENDED WARRANTY. *JB
I WAS GETTING ONTO THE INTERSTATE WHEN MY RPMS WOULD NOT DROP BELOW 5000 AND I REALIZED MY CAR LOCKED IN 2ND GEAR. THIS IS A VERY COMMON PROBLEM WITH THE A694/41TE TRANSMISSION THAT CHYSLER MADE.
SERPENTINE BELT WAS REPLACED WITH A NEW ONE BY THE DEALER, AND 10 DAYS LATER FLEW APART. THAT BELT WAS REPLACED FREE OF CHARGE BE ANOTHER DODGE DEALER, BUT THREE MONTHS LATER CAME OFF, BUT DID NOT BREAK. IT IS NOW THREE MONTHS LATER, AND THE BELT HAD TO BE REPLACED BECAUSE OF FRAYING.
I LOVE MY CAR. I BOUGHT THE CAR WHEN IT HAD 40 THOUSAND MILES ON IT, IN SEPT 2002. IN THE MONTH OF AUG. 2003 I CAME BACK HOME FROM IRAQ AFTER 7 MONTHS AND FOUND THAT MOST OF THE CLEARCOAT ON MY BLACK AVENGER ON THE TOP PANELS (HOOD, TOP, TRUNK) OF MY CAR WAS GONE. WHEN I LEFT THERE WAS ONLY A FEW SURFACE SCRATCHES ON THE CAR, THAT USUALLY BUFFED OUT. NOW MY CAR LOOKS LIKE ?!@#$% AND THE DEALER WILL NOT HELP ME OR THE MANUFACTURE. THERE HAS BEEN NO RECALL ON THE BLACK PAINT JOBS IN 2000, BUT MY CAR IS NOT THE ONLY ONE I'VE SEEN WITH THIS PROBLEM. I LOVE DODGE BUT THIS IS THE LAST ONE ME OR ANYBODY IN MY FAMILY WILL EVER PURCHASE IF I DON'T GET SOME KIND OF HELP WITH THIS DEFECT. THE CAR IS ONLY 3 YEARS OLD AND IT LOOKS LIKE ITS 25 YEARS OLD. THIS IS NOT RIGHT. I ONLY DROVE THE CAR FOR 5 MONTHS BEFORE I DEPLOYED. IF THIS IS NOT A DEFECT THEN THE DEALERSHIP SOLD ME A CAR THAT HAD BEEN IN A WRECK OR SOMETHING AND LIED TO ME. *AK
I WAS GETTING ONTO THE INTERSTATE WHEN I NOTICED MY RPM WERE AROUND 5000 AND WOULD NOT GO DOWN. I REALIZED THE TRANSMISSION HAD LOCKED IN SECOND GEAR. THIS IS A VERY COMMON PROBLEM WITH THE JUNK A604/41TE TRANSMISSION THAT CHRYSLER MADE. *LA
WHEN THE CAR WAS PURCHASED 11/01. I WAS INFORMED BY A DODGE TECH THAT THE TRANSMISSION WAS GOING TO GO "OUT" AROUND 50,000 MILES. I HAVE HEARD THIS FROM NUMEROUS DODGE OWNERS AND MECHANICS. AT 52,874 THE TRANSMISSION QUIT SHIFTING AND WE HAD TO TAKE IT TO THE DEALER FOR REPAIR ACCORDING TO THE EXTENDED SERVICE CONTRACT THAT I PURCHASED WITH THE CAR. THE CONTRACT WAS WITH AN OUTSIDE COMPANY. THE CONTRACT COMPANY WHEN CALLED ABOUT REPAIRS ALSO STATED THAT THEY ARE AWARE OF THE TRANSMISSION PROBLEMS ASSOCIATED WITH DODGE/CHRYSLER PRODUCTS. THE CAR WAS AT THE DEALER FOR 2 WEEKS AWAITING PARTS AND REPAIR.*AK
STRUTS, LATERAL ARM BALL JOINTS AND HUB ASSEMBLY FAILED AS A RESULT OF RECALL 00V421002 REPAIRS. MR *TT
LOWER BALL JOINTS,DUPLICATE LETTER RESPONDED TO BY MICHAEL JORDON ON 4-1-03 REFERENCE 10004221. THE CONSUMER EXPERIENCED PROBLEMS WITH THE VEHICLE AFTER THE RECALL WAS PERFORMED, HOWEVER THE DEALER TOLD THE CONSUMER THE PROBLEMS HE WAS EXPERIENCING WERE NOT RELATED. *JB
I HAVE 2 DODGE CARS, BOTH 2000, AN INTREPID AND AN AVENGER. THE SPEED SENSOR HAS GONE OUT IN BOTH CARS IN THE BEGINNING OF THE YEAR 2002. BOTH HAPPENED WHILE DRIVING ON A HIGHWAY, CAUSING IMMEDIATE DECELERATION. I SENT A LETTER TO CHYRSLER IN JULY OF 2002, BUT GOT NO RESPONSE. I HAVE THE INVOICES FROM THE REPAIRS AND THE PART # IS THE SAME ON BOTH CARS. *JB
CONSUMER RECEIVED A RECALL NOTICE REGARDING THE BALL JOINTS, THE DEALER RESEALED THE BALL JOINTS, HOWEVER 5 MONTHS LATER THE HUB BEARINGS, STRUTS, THE UPPER AND LOWER CONTROL ARM BUSHINGS AND THE RIGHT SIDE LOWER BALL JOINT WAS REPLACED, CONSUMER STATED THE DEALER FAILED TO RECTIFY THE PROBLEM WITH THE BALL JOINTS WHICH CAUSED NUMEROUS REPAIR BILLS, THE DEALER INFORMED CONSUMER THAT NONE OF THE PROBLEMS WAS RELATED TO THE RECALL.*JB
VEHICLE WOULD NOT SHIFT GEARS, THE DEALER FOUND THAT TRANSMISSION FLUID WAS LEAKING THROUGH A CRACK IN THE TRANSMISSION CASE, CONSUMER WAS INFORMED THAT IT CAME FROM THE FACTORY WITH THE CRACK AND THAT IT WOULD TAKE SEVERAL DAYS TO ORDER AND RECEIVE THE PART FOR REPAIR.*JB
THE BRAKE LIGHT COMES ON WHEN DRIVING, AND THE BRAKES PULSATES, AND A THUMPING NOISE WHEN BRAKING, THE ROTORS AND SPEED SENSOR WERE REPLACED
Von Haltern dieses Modelljahrs eingereicht und von der NHTSA nicht geprüft — die Schilderung einer Person, keine feststehende Tatsache.
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Abhilfe: DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Abhilfe: SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
CERTAIN AIRTEX FUEL PUMP MODULE ASSEMBLIES, P/N E7081H, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE WALL OF THE FLARED FITTING OF THE FUEL PUMP IS NOT THICK ENOUGH TO PREVENT THE MATING THREADED FITTINGS FROM BOTTOMING OUT BEFORE AN ADEQUATE SEAL IS ACHIEVED. THIS CONDITION MAY RESULT IN LEAKAGE OF FUEL AT THE CONNECTION OF THE VEHICLE FUEL LINE AND THE FUEL PUMP MODULE ASSEMBLY.
Abhilfe: AIRTEX WILL NOTIFY OWNERS AND REPLACE THE FUEL PUMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2007. OWNERS CAN CONTACT AIRTEX AUTOMOTIVE AT 800-880-3056.
CERTAIN TRADESONIC COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
Abhilfe: TRADESONIC WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2006. OWNERS MAY CONTACT TRADESONIC AT 626-934-8884.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. ALSO, MMC HAS ADDED THE POTENTIAL OF LEAKING MOISTURE, WHICH CAN CAUSE THE BALL STUD TO CORRODE.
Abhilfe: DEALERS WILL INSPECT THE LOWER LATERAL ARM BALL JOINT FOR WEAR. BALL JOINTS THAT EXHIBIT WEAR BEYOND THE ESTABLISHED TOLERANCE WILL BE REPLACED WITH NEWLY DESIGNED LATERAL ARM BALL JOINTS. BALL JOINTS THAT ARE WITHIN THE ESTABLISHED TOLERANCE WILL BE CLEANED AND A SPECIAL SEALANT WILL BE APPLIED TO PREVENT INTRUSION OF MOISTURE.
Nach Modelljahr veröffentlicht, nicht nach FIN — betrifft dieses Fahrzeug möglicherweise nicht oder wurde bereits erledigt. Beim Händler bestätigen.