3 Rückrufe und 190 Halterbeschwerden für dieses Modelljahr erfasst.
Diese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsselnFast alles hiervon beschreibt das Modelljahr, nicht das einzelne Fahrzeug. Nichts davon sagt etwas über Laufleistung, Unfälle oder Eigentum dieses Autos — keine Kennung kodiert das.
WHILE DRIVING MY 2008 BMW X3, THE DRIVER SIDE HEATED SEAT WAS TURNED ON, THAN SHORTED OUT, BURNED THROUGH THE PROTECTIVE LAYERS, A STINKY SMOKE CREATED, MELTED MY LEATHER SEAT, AND PARTIALLY BURNED MY JEANS AND LEG. DUE TO THE YEAR AND MILES ON THE VEHICLE, BMW WOULD NOT FIX ANY OF THE PARTS.
GO HERE FOR THE ENTIRE STORY: WWW.BMWFIRE.COM I PURCHASED A BRAND NEW 2008 BMW 328I FOR $38,000 FROM SONNEN BMW IN SAN RAFAEL, CALIFORNIA. THE CAR HAD A SERIOUS MANUFACTURERS DEFECT THAT CAUSED AN ELECTRICAL FIRE AND RESULTED IN MY CAR BEING TOTALED. I HAD MULTIPLE ISSUES WITH THE FRONT PASSENGERS SIDE FOG LIGHT FALLING OUT OF ITS CASING INTO THE LOWER CORNER OF THE BUMPER WHICH CAUSED THREE SEPARATE FIRES. BMW HAS REFUSED TO REPLACE MY VEHICLE THAT HAD 11,500 MILES AND IS COVERED UNDER WARRANTY. AT THE END OF JUNE 2008 I FIRST REALIZED THIS PROBLEM HAPPENED UPON A CLOSER INSPECTION OF THE EXTERIOR OF THE CAR. I BROUGHT THE CAR RIGHT AWAY TO SONNEN BMW'S SERVICE DEPARTMENT, AS I WAS WORRIED ABOUT THE SAFETY OF THE VEHICLE. I SHOWED THEM WHAT HAPPENED, BUT THEY TOLD ME THAT THEY HAD NO AVAILABLE APPOINTMENTS UNTIL TWO WEEKS OUT AND THAT MY CAR WAS SAFE TO DRIVE. TWO WEEKS LATER I BROUGHT MY VEHICLE TO SONNEN'S SERVICE DEPARTMENT, THEY "VERIFIED THE DEFECT" AS STATED IN THEIR SERVICE RECORDS. THEY REPLACED THE COMPLETE FRONT BUMPER AND SUPPOSEDLY RE SECURED THE FOGLIGHT. ALL OF THIS WAS COVERED UNDER BMW'S WARRANTY AS IT WAS A MANUFACTURES DEFECT. I ASKED TOM MURTHA (MY SERVICE ADVISOR) WHY THIS HAD HAPPENED, HE TOLD THAT BECAUSE THERE WAS ABSOLUTELY NO IMPACT DAMAGE, THE ONLY WAY THIS COULD HAVE OCCURRED WAS A MISTAKE WHEN BUILDING THE VEHICLE AT THE FACTORY. I THOUGHT ALL OF MY PROBLEMS WERE SOLVED UNTIL A FOGGY DAY IN SAN FRANCISCO, CALIFORNIA. ON OCTOBER 25TH, 2008 AT APPROXIMATELY 4:00 PM. WHILE WAITING AT A STOPLIGHT I TURNED ON MY FOG LIGHTS AT THE INTERSECTION OF FRONT & BROADWAY (ASSUMING THAT THE FOGLIGHT HAD BEEN SECURED). IT WAS FOGGY OUT AND MY PASSENGER AND I COULD NOT SEE THE SMOKE THAT WAS COMING FROM THE PASSENGER SIDE FOG LIGHT BECAUSE OF A SMALL FIRE IT CAUSED. I WAS MADE AWARE OF THIS WHEN A PEDESTRIAN WALKED UP TO MY CAR AND ALERTED ME THAT THERE WAS A FIRE. I PULLED OVER RIGHT AWAY AND I DUMPED THE CONTENTS OF A LARGE WATER BOTTLE ON THE FLAME. *TR
TL* THE CONTACT OWNS A 2008 BMW X3. WHILE DRIVING, THE DRIVER'S SEAT HEATING ELEMENT BURNED THROUGH THE SEAT TO THE CONTACT'S CLOTHES. THE CONTACT SUSTAINED A BURN ON THE RIGHT SIDE OF HIS BEHIND, WHICH REQUIRED MEDICAL ATTENTION. THE DEALER WAS NOT CONTACTED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 203,000. THE VIN WAS NOT PROVIDED.
I am reporting a vehicle fire involving my 2008 BMW X3, which had an active safety recall for the Positive Crankcase Ventilation (PCV) valve heater (Recall Campaign No. 22V-119). This recall identifies a risk of short circuiting, overheating, and potential fire. On February 27, 2026, I contacted BMW after discovering multiple active recalls on my vehicle. I specifically asked whether the vehicle was safe to drive. After consulting internally, I was advised that I did not need a tow and that the vehicle was safe to drive. Based on this guidance, I scheduled a repair appointment for March 24, 2026. On March 14, 2026, before starting the vehicle, I noticed a very faint smell of burning plastic, which I reasonably believed was coming from a nearby source and not from my vehicle. After starting the vehicle and driving approximately 2–3 blocks, the smell rapidly intensified and began filling the interior. Multiple dashboard warning lights illuminated, and the vehicle lost acceleration almost immediately. I safely pulled the vehicle off the road, turned it off, and opened the hood, at which point I observed smoke and active fire originating from the rear/center area of the engine compartment. I immediately called 911, and the Central Mat-Su Fire Department responded and extinguished the fire. The vehicle sustained extensive fire damage and has been deemed a total loss. I am concerned that despite a known recall involving fire risk, I was advised that the vehicle was safe to drive, which may have contributed to this incident. There were no indicators of any problems prior to driving it and the dashboard only lit up seconds before the vehicle stopped moving and caught fire. It has not been inspected by anyone but I have it covered on my property to preserve the evidence. I am waiting to receive the fire department report and can provide that once it’s available.
The contact's wife owns a 2008 BMW X3. The contact stated while driving at 40-45 MPH, he saw smoke coming out from underneath the hood of the vehicle. The contact was unsure whether there were warning lights illuminated. The contact veered to the side of the road. The contact then opened the hood of the vehicle and saw flames. The contact was able to extinguish the flames with the assistance of the fire department. There were no injuries sustained. The contact was unsure whether a fire department report and a police report were filed. The vehicle was towed to the contact's residence. The contact stated that a couple of days later, he was able to restart and drive the vehicle. The contact later received notification of NHTSA Campaign Number: 22V119000 (ENGINE AND ENGINE COOLING) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer and the manufacturer were not notified of the failure. The vehicle was diagnosed or repaired. The failure mileage was unknown.
ON DECEMBER 19, 2020 WHILE DRIVING WITH MY DRIVER'S SEAT HEATER ON WARMING MY SEAT DUE TO COLD WEATHER, I WAS ON MY WAY TO PICK UP MEDICATION AT THE PHARMACY WHEN I NOTICED A SHARP STING AND BURNING SENSATION ON MY LOWER RIGHT SIDE. I LOOKED DOWN AND NOTICED MY COAT ON FIRE. I IMMEDIATELY PULLED OVER AND TURNED THE CAR OFF. I GOT OUT, FRANTICALLY PATTED MY COAT THAT WAS BURNING, AND LOOKED AT MY SEAT TO SEE IF THERE WAS A FIRE AND THERE WAS A HOLE WHERE THE HEATER HAD BURNED COMPLETELY THRU THE LEATHER SEAT. I GOT BACK IN, DIDN'T TURN THE HEATER ON, AND WHEN I ARRIVED HOME I DIDN'T DRIVE UNTIL THAT MONDAY, DECEMBER 21, 2020 I DROVE TO MY LOCAL BMW DEALERSHIP THAT REGULARLY SERVICES MY VEHICLE AND EXPLAINED WHAT HAPPENED AND ASKED IF THERE WAS A KNOWN RECALL OR ISSUES. HE EXPLAINED IT WAS A KNOWN ISSUE WITH THE HEATER SYSTEM IN THE SEATS FAILING AND CAUSING DAMAGE BUT CURRENTLY NO RECALLS FOR THE ISSUE. I ASKED HOW COULD THAT BE WITH THE DANGER INVOLVED? I EXPLAINED IT COULD HAVE BEEN TRAGICALLY WORSE IF I HAD CAUGHT FIRE AND COULDN'T GET IT OUT. I WAS LUCKY I FELT IT QUICKLY AND WAS ABLE TO PULL OVER AND GET OUT OF THE VEHICLE. CHRIS AT CAIN BMW, NORTH CANTON, OHIO INSPECTED MU VEHICLE AND GAVE ME AN ESTIMATE OF $1,495.00 TO REPLACE THE PART OF MY SEAT AFFECTED WITH A NEW HEATING SYSTEM AND REPAIR. I FEEL THAT THIS SHOULD BE A RECALL DUE TO THE MANUFACTURER ALREADY KNOWING THERE'S AN ISSUE. I JUST WANT THEM TO RECALL VEHICLES THEY KNOW ARE AFFECTED AND REPAIR. OR AT LEAST VOLUNTARILY REPAIR VEHICLES THAT REPORT THE ISSUE. (JUST FOR CLARIFICATION: I WAS DRIVING THRU TOWN ON A STATE HIGHWAY AND CITY STREETS) I KEPT THE COAT THAT CAUGHT FIRE JUST IN CASE IT WOULD BE NEEDED LATER.
AFTER TURNING ON THE DRIVER'S SEAT HEATER, IT DEFAULTS TO HIGH, THE LEFT SIDE SEAT BOLSTER STARTED TO SMOKE. A FEW SECONDS LATER BEFORE MY WIFE REALIZED WHAT WAS HAPPENING SHE FELT HER LEFT ARM AND SIDE GETTING A LOT HOTTER THAN THE REST OF HER SEAT. THE SEAT HEATER THEN IMMEDIATELY BURNED A HOLE THROUGH THE LEATHER SEAT WHILE MY WIFE WAS DRIVING DOWN A CITY ROAD.
MY 2008 BMW 335XI WITH 42000 MILES WAS STORED IN MY HEATED SHOP. THE CAR STARTED ON FIRE AND DESTROYED THE CONTENTS OF MY SHOP AND THE CAR. BMW SENT AN INSPECTOR TO CHECK THE DAMAGE AND TOOK HUNDREDS OF PICTURES. CLEARLY THE FIRE STARTED UNDER THE GLOVE COMPARTMENT AREA AND CONTINUED TO BURN UNTIL THE FRONT OF THE CAR, WINDSHIELD AND INTERIOR WAS DESTROYED. CONTENTS IN MY SHOP WERE DESTROYED AND THE INTERIOR OF THE BUILDING HAD TO BE GUTTED TO THE STUDS. BMW OFFERED NOTHING. DAMAGES TOTALLED MORE THAN $150,000. I RECEIVED A RECALL LETTER FROM BMW 3 WEEKS AFTER THE FIRE. * (RECALL RELATED INCIDENT)
I RECEIVED A RECALL LETTER TELLING ME TO STAND BY FOR ANOTHER RECALL LETTER TO THEN TELL ME TO HAVE THE CAR FIXED. THE CAR BLOWN UP PARKED OUTSIDE OF MY HOUSE IT HAS NOT BEEN USED FOR 24 HOURS PRIOR TO THE INCIDENT. I HAVE JUST NOW RECENTLY RECIEVED THE SECOND RECALL LETTER MONTHS LATER NO. 17V-676
CAR WAS PARKED IN THE DRIVEWAY, DROVE IT EARLIER THAT DAY FOR ABOUT AN HOUR, PARKED IT 3PM AND 2 HOURS LATER NEIGHBOR CAME KNOCKING SAYING CAR WAS SMOKING. RAN OUTSIDE AND CAR WAS ON FIRE. INTERIOR WAS SMOKED OUT. KEYLESS ENTRY WAS DEAD. BROKE THE WINDOW TO GET THE CAR OPEN, TURNED THE GARDEN HOSE ON TO TRY AND STOP THE CAR FROM BURNING. CALLED 911 FIRE DEPT ARRIVED AND HAD TO PRY THE TRUCK OPEN BECAUSE IT WAS STILL SIZZLING. FIRE DEPT CUT THE BATTERY CABLES AND SAID IT LOOKED LIKE AN ELECTRICAL FIRE UNDER THE DASH. GLOVE BOX AND PASSENGER SIDE FRONT SEAT WAS COMPLETELY CHARRED. AFTER 22 DAYS, A BMW ENGINEER AND ALLSTATE INS CALLED IT A TOTAL LOSS. BMW ENGINEERS REPORT STILL HAS NOT BEEN PUBLISHED. TOTAL LOSS ON A PARKED VEHICLE; CLEARLY THIS VEHICLE WAS UNSAFE AND A DESIGN FAULT. MANUFACTURERS ARE SUPPOSE TO ENGINEER CARS TO WITHSTAND FIRES.
The problem with the 2008 BMW X3 transmission is going to get someone KILLED!! This transmission DOES NOT RESPOND when depressing the accelerator at random times & HAS DONE THIS SINCE THE DAY I BOUGHT IT. it happened once after pulling away from an ezpass booth - the car just froze and would not accelerate nearly causing an accident. Now it has caused an accident. How are you not doing anything when this has CAUSED DEATHS!!! here is a link to a blog that shows many bmw x3 owners have the problem - some have had their cars replaced by bmw and others have been ignored. this is a serious safety issue that is being ignored by the manufacturer (similar to the toyota issue). please investigate before someone gets killed. http://www.bimmerfest.com/forums/showthread.php?t=262130.
MY CAR HAS SUDDENLY LOST POWER IN SEVERAL OCCASIONS NEARLY CAUSING AN ACCIDENT AT 60 MPH ON ONE OCCASION. WHEN POWER IS LOST STEERING SEIZES UP COMPLETELY. THIS HAPPENS WITH ABSOLUTELY NO WARNING WHATSOEVER & MY CAR HAS STARTED UP AS THOUGH NOTHING IS WRONG AFTER. THE SECOND ISSUE IS SO WELL KNOWN IT HAS BEEN LABELED AS THE "TERRIBLE TRIAD" AC ROAD ALL BMW FORUMS, YOUTUBE. TWITTER, ETC. YOU CAN FIND THOUSANDS OF CHATS & FORUMS DISCUSSING THE 3 LIGHTS WHICH APPEAR SIMULTANEOUSLY DUE TO TRANSFER CASE ACTUATOR & I DRIVE ISSUES. MY 4X4 LIGHT IS ON INDEFINITELY & ALL OF THE SYMPTOMS CAN BE FELT.
I LEFT MY CAR PARKED ON THE CORNER OF ELMHURST AVENUE AND ITHACA STREET IN ELMHURST, QUEENS NY. ANOTHER CAR BY THE LICENSE PLATE OF [XXX] A VOLKSWAGEN WAS PARKED LITERALLY ON MY CAR. THERE WAS A CLEAR IMPACT AND THE CAR WAS LEFT LITERALLY TOUCHING THE BACK OF MY CAR. I HAVE PLENTY OF PICTURES AS EVIDENCE. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR
The contact owns a 2008 BMW X3. The contact stated while driving approximately 20 MPH with the front driver's seat heater activated, the contact felt a sharp pain on the buttock and immediately leaned forward. The contact stated that upon touching the seat, the contact noticed that the seat heater had burned the seat through the seat leather cover. There was no warning light illuminated. The contact was able to pull to the side of the road immediately, and the contact turned off the seat heater. The contact noticed that the seat burn hole was the size of a cigarette hole, and there was a burn mark on the contact's pants. The contact stated that the burning sensation he had sustained did not require medical assistance. The contact was able to continue driving. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 130,000.
The contact owns a 2008 BMW X3 equipped with Arroyo Tires, Tire Line: Grand Sport A/S, Tire Size: 254/40/R19, DOT Number: 1TBY3KB5C. The contact stated while driving at an undisclosed speed, the contact noticed that the tread of the tires became inoperable. The contact stated that the vehicle became difficult to control. The contact parked the vehicle and inspected all the tires and the contact noticed that the inside of all the tires tread had separated. The vehicle was taken to an independent where it was diagnosed that the tires failed due to the tires being delaminated, and the tires needed to be replaced. The tires were replaced. The manufacturer was notified of the failure. The tire failure mileage was 500. The vehicle failure mileage was 325,000.
Von Haltern dieses Modelljahrs eingereicht und von der NHTSA nicht geprüft — die Schilderung einer Person, keine feststehende Tatsache.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Abhilfe: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Abhilfe: BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2006-2010 BMW X3 2.5i, X3 3.0i and X3 xDrive30i Sports Activity Vehicles. The front passenger seat occupant detection mat that determines if, and how, the passenger frontal air bag should deploy in a crash may fatigue and develop cracks which could lead to a system failure.
Abhilfe: BMW will notify owners, and dealers will replace the front passenger seat occupant detection mat, free of charge. Interim owner notification letters were mailed on November 27, 2017. A second notification letter will be sent when parts are available. Owners may contact BMW customer service at 1-800-525-7417.
Nach Modelljahr veröffentlicht, nicht nach FIN — betrifft dieses Fahrzeug möglicherweise nicht oder wurde bereits erledigt. Beim Händler bestätigen.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing failure, the protection of the two outer headrests in the second row is reduced. In the event of a collision or accident, passengers could be injured. In addition, headrest parts may become exposed and also cause serious injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Damaged brake discs may have been fitted to the front axle. This can lead the brakes to fail when a heavy load is placed on the wheel concerned, increasing the risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Failure to bolt the plus voltage (B+) cable tightly enough to the starter generator may result in contact problems and an increase in contact resistance at the bolted connection. This may in turn lead to local overheating and the vehicle catching fire or to the engine stalling while the vehicle is coasting. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The steering system sensor may malfunction causing an unintended steering movement of the vehicle. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The vehicles concerned have already been modified in connection with the recall code 0051960500. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion, and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver's airbag inflator propellant may deteriorate over time. If activated during an accident, excessive internal pressure may cause the inflator to burst, and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abgeglichen über Marke und Modellname — Safety Gate veröffentlicht keine FIN. Prüfen Sie die Produktionsdaten und nennen Sie dem Händler den Rückrufcode.