5 richiami e 130 segnalazioni di proprietari registrati per questo anno modello.
Questa pagina descrive il modello. Per sapere come è equipaggiata una singola auto e se il suo identificativo è valido, decodifica il VIN.
Decodifica un VINQuasi tutto questo riguarda l’anno modello, non la singola auto. Nulla qui può dirti chilometraggio, incidenti o proprietà di questo veicolo: nessun identificativo li codifica.
The contact owned a 2025 Toyota Tundra. The contact stated that while driving at approximately 60 MPH, there was an object in the road that he attempted to swerve around; however, the lane-keeping assist feature independently activated, causing the vehicle to jerk off the road, down the median, and crash into a ditch. The vehicle was not drivable. No warning lights were illuminated. The air bags were deployed. The contact could not recall if the vehicle was towed or not. The contact stated that his head crashed into the door frame and knocked him unconscious; the contact stated that when he woke up, he was in an ambulance on its way to the hospital. The contact discovered at the hospital that he had five broken ribs and bruises spread all over his body. Medical treatment was needed, and the contact was in the hospital for a few days. A police report was filed. The manufacturer was notified of the failure. The failure mileage was approximately 5800.
The contact owned a 2025 Toyota Tundra SR5. The contact stated that while driving at an undisclosed speed, the vehicle was involved in a three-vehicle crash. The contact's vehicle was between the other two vehicles. The contact's vehicle was crashed into from the front and the rear. The air bags did not deploy. The air bag malfunction warning light was displayed. The contact's four children were occupants of the vehicle. In addition, the contact's adult daughter occupied the front passenger's seat. The contact stated that the Toyota Connect Safety connected and communicated with the contact regarding the crash. The contact sustained injuries to the right wrist and hand, a mild concussion, and pain in both legs. The contact received medical treatment the following day and is awaiting scheduling for physical therapy. The contact stated that the four children sustained minor pains from the crash; however did not receive medical treatment. In addition, the contact stated that the two adult children are now feared for driving because of the crash. The vehicle was towed to a local tow yard. The vehicle was condemned as a total loss. A Police report was filed. The manufacturer was made aware of the failure. The failure mileage was approximately 4,061.
On August 31, 2025, my 2025 Toyota Tundra experienced a sudden steering failure while I was driving, which caused an accident with a parked vehicle. The steering wheel completely seized up and I was unable to control the vehicle. This was a serious safety hazard that put my life and the lives of others on the road at risk. The vehicle showed warning messages and error codes related to the steering system immediately before and after the crash. The problem was unexpected and there was no prior damage to the vehicle that would explain this. The vehicle is currently at a Toyota dealership, where the dealer has confirmed that the inspection has been submitted to Toyota corporate for review. My insurance company has also inspected the vehicle. At this time, Toyota has not provided me with a resolution. This appears to be a manufacturer defect in the steering system. The vehicle is available for inspection upon request.
Unintended acceleration. When you stop the truck, and have the brake on, the rpms go down to idle ~650. As soon as you lift the brake, without touching the accelerator, the vehicle starts ramping up the rpms and moving. On level ground it will go to 1000 easily before you have to stop it. It will pull up a grade even while towing my boat. If you're in a line a traffic, say at a traffic light, and the light changes, traffic moves and the car ahead takes off their brakes, and you do same, the truck starts moving faster than the vehicle ahead without touching anything. It's idling too fast without the brake and doesn't stay at idle once the brake is off before you push the accelerator. First the dealer told me everything was "Normal" - it's supposed to do that. I've been driving vehicles since 1962, so I think I know what I'm talking about. They told me to call Toyota. Toyota started a case. They took it in for an factory inspection because I think this might be related to a non highway collision with a bldg, I had shortly after I got it, I'm not sure. I put into park in a parking space but apparently it didn't engage, only into reverse. I was looking for something and the truck started backing up and hit the gas station bldg close behind. The anti-collision was off, because you have to turn it off to tow. And I hadn't turned it back on yet. This truck has way too many audible alarms and very annoying, especially when backing or exit the vehicle. I don't need to know that I'm out of the vehicle.
The vehicle does not predictably respond to throttle inputs (if it responds at all), when you come off the brake pedal it will begin rolling at "idle" speed as normal but when you begin to increase throttle input NOTHING will happen for several very important seconds as you roll into an intersection or need the vehicle to accelerate to maneuver. This had happened multiple times before scheduling service appointments. The day BEFORE my appointment while trying to make a right hand turn from EB 13st St in Lemont IL to SB Bell Rd, i had stopped for the red light, verified clearance to make the turn, and began my maneuver. Once I came off the brake pedal the vehicle began to roll into the intersection but as I began to turn the vehicle and try to accelerate though the turn it did not respond WHATSOEVER. I desperately tried to roll my vehicle into the ditch to make space the incoming vehicles to minimize danger, but had no power to do so and was violently T-boned. The vehicle was brought to the dealer for their analysis, the service manager initially claimed "I know exactly what it is" and continued to ask questions that prompted previous knowledge of this issue including what speeds and conditions it will occur at.. two weeks later the vehicle is "ready" and the manager claims the "eprom" had 2 pages of codes in it and that "got rid of the hesitation" I take him for a test drive with me and was able to recreate the issue a few times at which point he said "i understand your frustration with the truck but its a GOOD TRUCK" I drove the truck a few days and continued to experience dangerous and unpredictable delays in throttle response, one of which almost caused me to be rear-ended by a semi while merging from IL-rt83 onto I-55 nb The vehicle has been left behind on a family road trip as it is not safe enough for my family. In hind sight I wish I had the opportunity to submit it to NHTSA for examination after the crash rather than than Toyota. PLEASE DO SOMeTHING
The alignment has consistently been an issue since I purchased the truck in March 2025. I've had the wheels aligned 3 times since I purchased it. I took it in for the 25000 mile service and it's out of alignment again. I've never had a vehicle go out of alignment let alone 4 times in 18 months.
On July 20, the vehicle experienced a catastrophic mechanical failure resulting in a total engine seizure while operating. The failure caused an immediate, sudden loss of motive power, forcing the vehicle to become completely immobilized on the Interstate highway. This unexpected loss of propulsion created an immediate and severe highway crash hazard for myself and surrounding traffic. The vehicle was towed to an authorized Toyota dealership on July 20 under the 5-year/60,000-mile factory powertrain warranty. The vehicle has remained completely out of service since that date. The dealership has tentatively scheduled the engine repair and replacement to begin on August 24 or 25, meaning the vehicle will have been non-operational and out of service for over 35 consecutive days before repairs even commence.
The contact owns a 2025 Toyota Tundra. The contact stated that while attempting to defrost the windshield on several occasions during the winter months, the windshield defroster failed to operate properly. The vehicle was taken to a dealer on two separate occasions and remained there for weeks. However, the dealers were unable to determine the cause of the failure and were awaiting approval from the Corporate Office to proceed with the diagnostic test. The vehicle was not yet repaired. The manufacturer was notified of the failure. The failure mileage was approximately 17,000.
The plastic piece that is where the drivers power seat controls had cracked again for the 2nd time and it could pinch someone or poke them as it’s sharp
I am reporting a severe thermal and electrical safety hazard regarding the OEM wireless charging pad in a 2025 Toyota Tundra. During standard vehicle operation, the integrated charging pad overheats to extreme temperatures. On a recent drive, the heat generated by the vehicle's charging pad was so intense that it physically melted, blistered, and deformed a MagSafe-compatible protective case on a Samsung Galaxy S25 Ultra. This safety issue has been brought to an authorized dealership, Toyota of Hollywood (Repair Order #[XXX]), for a second consecutive time. The dealership officially documented the property damage in writing on the invoice, stating: 'Phone got melted from how hot it gets.' However, they refused to perform repairs or disable the system, explicitly noting: 'Vehicle was compared to another and both doing the same.' By admitting that multiple new vehicles exhibit this exact overheating behavior, the manufacturer is confirming a systemic and unaddressed design or manufacturing defect. An in-dash electrical component capable of melting plastic poses an immediate cabin fire hazard, risks triggering thermal runaway in the mobile device's lithium-ion battery, and directly threatens occupant safety. Toyota Corporate has opened Case #[XXX], but no remedy or safety recall has been provided." INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Toyota Tundra 2025 Limited stalled at highway speeds. The vehicle flashed "Parking Brake Support" message, but dealer says it has to do with an engine failure. Vehicle came to a grinding stop and would only advance in short spurts before dying on the side of the road. I was in the left lane of a major highway during rush hour. Luckily, traffic was behind me, and I was able to limp to the shoulder before traffic arrived. I noticed nothing prior. A loose gas cap may have prompted the system to send failure message. I haven't heard yet why it stalled. But my safety was definitely put at risk, and I was lucky to not be rearended
Heads up display(HUD) and windshield incompatibility issues from factory making HUD display blurry. Very distracting while driving because you’re too busy trying to see clearly and it takes away time from playing attention to the road. Lots of reports online about blurry HUD with 3rd generation toyota tundra from the beginning model year all the way up to most recent model year- it seems like they’re not doing anything about it. People online have reported getting dizzy while driving when trying to focus on the HUD- possible cause of accidents? Please look into this!
The truck has had three alignments and it still pulls to the right.
Have owned the 2025 Toyota Tundra for about 18 months. Multiple instances of delayed acceleration when stopped or almost stopped, sometimes as much as 3 or 4 seconds. Last time was in early June, 2026. This is very dangerous because when I pull out into an intersection it will start to go but then lose all power for a few seconds with traffic coming behind me. This is something Toyota needs to look into.
I have experienced a severe hesitation or delay in acceleration when accelerating from a stop or near-stop condition. While the issue has only occurred a few times over the past several months, on multiple occasions it happened while merging into traffic and nearly resulted in an accident. Toyota has issued Technical Service Bulletin (TSB-0032-26) addressing this condition. However, when I brought my vehicle to the dealership, Toyota documented that they were unable to reproduce or confirm the hesitation, and no repair was performed. This defect presents a significant safety risk. Unexpected loss of acceleration during traffic merges, intersections, or other situations requiring immediate power can place drivers and passengers in danger and could lead to serious injury or death. Given the safety implications and the fact that the remedy appears to be a software update requiring less than an hour to perform, I believe this issue warrants a formal safety recall rather than a voluntary Technical Service Bulletin. I urge NHTSA to investigate this matter and require Toyota to provide a recall remedy for all affected vehicles.
Presentate dai proprietari di questo anno modello e non verificate da NHTSA: il racconto di una persona, non un fatto accertato.
The vehicles can contain crankshaft main bearings that have not been properly cleared of machining debris during manufacturing. This contamination can cause the bearings to fail. This can lead to engine knocking, rough running, inability to start, or stalling. If the engine stalls while driving, the sudden loss of power increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abbinati per marca e nome del modello: Safety Gate non pubblica il VIN. Controlla le date di produzione e cita il codice del richiamo al concessionario.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Toyota Tacoma Hybrid, 2025 Tundra Hybrid, Tundra, 2026 RAV4 Hybrid, 4Runner i-Force Max Hybrid, and 4Runner vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Rimedio: Dealers will replace the load carrying capacity modification label, free of charge. Owner notification letters are expected to be mailed October 18, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's number for this recall is 26TA18.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Rimedio: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Rimedio: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Rimedio: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Rimedio: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
Pubblicati per anno modello, non per VIN: potrebbero non riguardare questo veicolo o essere già stati eseguiti. Verifica con un concessionario.