5 richiami e 135 segnalazioni di proprietari registrati per questo anno modello.
Questa pagina descrive il modello. Per sapere come è equipaggiata una singola auto e se il suo identificativo è valido, decodifica il VIN.
Decodifica un VINQuasi tutto questo riguarda l’anno modello, non la singola auto. Nulla qui può dirti chilometraggio, incidenti o proprietà di questo veicolo: nessun identificativo li codifica.
I WAS DRIVING MY VEHICLE ON OUR STREET, WHICH IS CONSIDERED A PRIVATE ROAD, WHILE PREPARING TO TURN AROUND A BEND IN THE ROAD, A 94YR OLD WOMAN WALKED IN FRONT OF MY CAR, WAS STRUCK, AND DIED. AT NO TIME DURING MY TURN DID I SEE THE WOMAN AS SHE STEPPED IN FRONT OF MY CAR. RESEARCH OF THE 2014 HIGHLANDER REVEALED MANY OWNERS HAD DIFFICULTY SEEING ANY OBJECT OR PERSON DUE TO THE BLIND SPOT OF THE LEFT SIDE MIRROR. RESEARCH AT TOYOTA NATION FORUM, REVEALED ALL OWNERS HAD BLIND SPOTS DUE TO THE SIZE AND POSITION OF THE LEFT SIDE MIRROR. MOST WERE RELATED TO DRIVERS 5'2" IN HEIGHT, BUT 6FT DRIVERS ALSO COMPLAINED ABOUT THE BLIND SPOT OF THE LEFT SIDE MIRROR. IN FACT, I FOUND ANOTHER DRIVER WHO HIT A PEDESTRIAN, BUT THEIR VICTIM SURVIVED.
WHILE BACKING OUT OF MY DRIVEWAY, THERE WAS A SOUND, AND THE CAR SUDDENLY ACCELERATED AND COULD NOT STOP WHEN PRESSED THE BRAKE AND THE PARKING BRAKE. CRASHED INTO THE NEIGHBOR'S YARD WITH SUCH FORCE THAT THE CAR ROLL OVER. IT COULD HAVE CAUSED SERIOUS INJURY TO ME, A PASSERBY, OR NEIGHBOR'S CHILDREN.
I WAS T BONED ON PASSENGER SIDE, SIDE IMPACT AIR BAG DID NOT DEPLOY. I WAS PUSHED INTO ONCOMING TRAFFIC, FRONT AIRBAGS DID NOT DEPLOY IN HEAD ON COLLISION. SEAT BELT DID NOT TIGHTEN- I INITIALLY HIT DRIVERS SIDE WINDOW, WHEN T-BONED, THEN WITH FRONT IMPACT HIT STEERING WHEEL, ROOF AND CENTER CONSOLE. *TT *TR
TO AVOID TWO DEER CROSSING ROAD (BULL BRIDGE ROAD, SOUTH KENT, CT) ON CURVE, LOST CONTROL ON RIGHT SHOULDER, HIT STRAIGHT ON THE UTILITY WOOD POLE. MY SPEED WAS IN BETWEEN 25 AND 30 MPH. DURING THE ACCIDENT, ALL AIRBAGS DID NOT GO OFF AND THE SEAT BELT DID NOT LOCK ME UP. THE IMPACT CAUSED MY CHEST, BACK, NECK AND HEAD INJURIES.
REAR LIFT DOOR (HATCHBACK) DOES NOT STOP IF AN ARM OR BODY PART IS IN THE WAY ONCE THE BUTTON TO CLOSE IS PUSHED. MY HAIR GOT CAUGHT IN THE LOCK AND THE DOOR WAS CLOSING SO I TRIED TO STOP IT WITH MY ARM AND IT KEPT CLOSING ON MY ARM WITH MY HAIR CAUGHT AND MY ARM IS SEVERELY BRUISED. THE VEHICLE WAS IN PARK AND SHUT OFF IN MY DRIVEWAY
WHEN DRIVING ON THE HIGHWAY THERE IS LOUD WIND NOISE WITH WINDOW SHUT. ALSO IF ONE WINDOW IS DOWN THERE IS A AWFUL NOISE THAT HURTS THE EARS.
I noticed the smell of wires burning, a billow of smoke started emitting from the two levers used to heat the seats near the gear shift area. I was on the freeway and immediately pulled to the side of the road, turned off the car and called 911 before any flames were seen. There were no warning signs, lamps or other symptoms until the smell of burning wires and the smoke.
I WAS DRIVING MY CAR ON THE RIGHT ONLY LANE AND SEE THE RED LIGHT ON THE TRAFFIC SIGNAL. IT IS NOT A BUSY STREET. AND THERE IS A CAR IN FRONT OF MINE. I APPLIED BRAKES AND THE BRAKES MALFUNCTIONED. THE CAR DID NOT STOP AND TRIED BY PUSHING THE BRAKES IN FULL THROTTLE. IT DID NOT WORK AND MY CAR BUMPED INTO THE CAR IN FRONT OF ME. I TOWED MY CAR AND HAD MY CAR INSPECTED AT DEALERSHIP. THE REPORT WAS GREEN AND SO NO ISSUES. AND FILED A CASE WITH TOYOTA TO HAVE THE BLACK BOX REVIEWED. TOYOTA REPORTED NO ISSUES. AT THIS TIME I AM HELPLESS AND HAVE A SERIOUS CONCERN OF RUNNING INTO THE SAME ISSUE PUTTING MY AND OTHERS LIFE AT RISK.
Component: Latches/Locks — Power Door Lock Actuator I am the original owner of a 2014 Toyota Highlander AWD, currently with 88,000 miles on it. I have experienced six power door lock actuator failures on this vehicle. All replacements were OEM Toyota parts, and all repairs were paid out of pocket. Failure history: - 01/12/2019 — driver rear (original part) - 02/27/2019 — driver front (original part) - 12/07/2019 — passenger rear (original part) - 06/09/2023 — passenger front (original part) - 08/08/2025 — driver rear (OEM replacement, 6 yr 7 mo service life) - 08/30/2026 — driver front currently failing (OEM replacement, 7 yr 6 mo service life) All four original actuators failed between years 5 and 9 of the vehicle's life. Two OEM replacements have since failed on a comparable schedule. This is a consistent wear-out pattern across every door on the vehicle, not isolated part failure. The higher-cycle driver-side doors have now failed twice each. Current condition: the driver front door intermittently does not lock when commanded by the key fob or by the interior lock switch. The failure is silent — there is no chime, warning, or indication that the door did not secure. The driver has no way to know the door is unlatched without physically checking it. Safety concern: an unsecured door can open during vehicle operation, and reduces occupant protection in a side impact or rollover because the latch is not engaged. Because the failure is intermittent and gives no warning, a driver can reasonably believe the vehicle is locked when it is not. This affects occupants including children in rear seating positions. Toyota has issued no recall, technical service bulletin, or warranty extension for this component. Complaints describing the same repeated actuator failures have been reported by owners of Highlanders and other Toyota models across multiple model years. I am submitting this record so the failure pattern is documented.
The radio keeps freezing up all the time along with the back tail light area going in and out. I keep smelling like burnt wire smell. Engine sound really rough.
The driver’s-side rear spoiler on my 2014 Toyota Highlander Limited AWD has melted, bubbled, and warped. The vehicle has been stored 100% of the time in a fully enclosed garage with no windows since new. It has only 65,000 miles and has received all service exclusively at authorized Toyota dealerships. There has been no direct sun exposure, accident, or misuse. Toyota dealer and Corporate attributed this to “solar convergence” and denied any repair assistance or goodwill coverage. This explanation does not match the facts given the garage setup and minimal outdoor time. This appears to be a materials/design defect in the black plastic spoiler. Similar melting/warping issues are reported by other owners on Highlanders and RAV4s, even on low-mileage garaged vehicles. Dealer replacement quotes are typically $2,700+. I request NHTSA investigate this recurring plastic failure as a potential defect in materials and workmanship. Attachments (upload with form): • Photos of the melted spoiler (multiple angles) I am available for any additional information. 05 May 2026
The contact owns a 2014 Toyota Highlander. The contact stated that a hybrid system warning alert was displayed. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the windshield wiring system had failed and that the windshield needed to be replaced. The vehicle was not repaired. The mechanic informed the contact that the windshield failure was associated with NHTSA Campaign Number: 18E107000 (Electrical System, Visibility). The dealer was not contacted. The vehicle was not diagnosed or repaired. The windshield manufacturer was made aware of the failure; however, the vehicle manufacturer was not made aware of the failure. The approximate failure mileage was 190,000.
Was driving 70 mph on nj 287 when all sudden I hear something that sounded like implosion and air was coming from sunroof. Ended up being sun roof glass flew out of car sunroof frame. Toyota knew it was a defect as they did inspection but did not want to cover it because they said it’s out of warranty. Thankfully no one was driving behind me at that time
Rear lights located both on the tailgate and body of the vehicle. The lights covers failed to remain adhered to the lights themselves and fell off and are partially adhered as a result of what appears to be a failure of the adhesion material . Two light covers may have been lost while driving. Unknown if their loss resulted in damage(s) to others. Without the outer cover results in the exposure of the lights to weather and potential failure. Review with Toyota of Orange service manager confirm the failure of adhesive/ manufacturing process of the lights
Installed (4) Firestone Destination Le3 tires in March 2022. All four tires became dry rot in just over 2 years, failed inspection at 2 1/2 years. 70,000 mile tires with roughly 28,000 miles left of the warranty.
Presentate dai proprietari di questo anno modello e non verificate da NHTSA: il racconto di una persona, non un fatto accertato.
Fujian Wanda Automobile Glass Industry (Wanda) is recalling certain aftermarket Replacement Windshields sold for use in 2014-2018 Toyota Highlander vehicles. The windshields have an attached wire harness that water may leak into, possibly causing damage to the vehicle's Engine Control Module (ECM).
Rimedio: Wanda will notify owners, and service centers will replace the windshields, and inspect the ECM for damage, having it replaced, as necessary, free of charge. The recall began January 29, 2019. Owners may contact Wanda customer service at 1-864-281-2760.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Avalon, Camry, Sienna, and Highlander and model year 2015 Lexus RX350 vehicles. Fuel may leak from the one of the fuel delivery pipes in the engine compartment.
Rimedio: Toyota will notify owners, and dealers will replace any of the suspect fuel delivery pipes free of charge. The recall began November 17, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Highlander vehicles manufactured April 23, 2014, through April 29, 2014. The affected vehicles may have a second row right-hand seat assembly that does not fully lock into the inboard seat track in the forward first, second and third adjusting positions. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems."
Rimedio: Toyota will notify owners, and dealers will inspect and, if necessary, replace the second row right-hand seat, free of charge. The recall began in July 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Highlander and Highlander Hybrid vehicles. The affected vehicles may have improper software installed in the air bag electronic control unit (ECU) for the operation of the front passenger seat belt force limiter, and as a result, the force limiter may use the restraint setting designed for small occupants, such as those that weigh approximately 110 pounds, for all occupants regardless of their size. As such, some of these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Rimedio: Toyota will notify owners, and dealers will install a software update in the air bag electronic control unit, free of charge. The recall began on June 27, 2014. Owners may contact Toyota customer service at 1-800-331-4331.
Toyota is recalling certain model year 2014 Highlander vehicles manufactured November 20, 2013, through January 18, 2014. The third row middle seat belt assembly might not have been properly secured to the vehicle floor anchorage during vehicle assembly. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."
Rimedio: Toyota will notify owners, and dealers will inspect the third row middle seat belt anchor, and, if necessary, properly secure it to the vehicle floor anchorage, free of charge. The recall is expected to begin in March 2014. Owners may contact Toyota at 1-800-331-4331.
Pubblicati per anno modello, non per VIN: potrebbero non riguardare questo veicolo o essere già stati eseguiti. Verifica con un concessionario.
Due to a software issue, the Parking Assist control unit that works with the Panoramic View Monitor (PVM) to show the rearview camera image may briefly freeze when backing up if reverse gear is selected shortly after starting the vehicle. In addition, the rearview camera may not appear the next time the vehicle is started if the vehicle is turned on and off again within a short time window. This may increase the risk of a crash with a person or another vehicle during a backing event. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A flaw in the vehicle's combination meter programming causes it to deteriorate its memory. Due to this the display of the monitor may not work, removing access to the speedometer and warnings. This increases the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat back of second row seats may not remain in a locked position. A seat back that has not been secured in a locked position may fail to restrain occupants properly, increasing the risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The second-row split mid-bar seat back frame has an incorrect radius. When only one of the two seats in this seat row is folded, the rear occupants may come into contact with the mid-bar end and get injured. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The lower front bumper cover can easily come off, resulting in that the engine skid plate and fender liners may also detach from the vehicle while driving, creating a risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a specific software update error that can cause an abrupt reset, the data communication module (DCM) may not restart at the next ignition cycle. It will no longer be possible to initiate an emergency call using the eCall system, increasing the risk of injuries, delayed assistance in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abbinati per marca e nome del modello: Safety Gate non pubblica il VIN. Controlla le date di produzione e cita il codice del richiamo al concessionario.