8 rappels et 44 signalements de propriétaires enregistrés pour cette année modèle.
Cette page décrit le modèle. Pour savoir comment une voiture précise est équipée et si son identifiant est valide, décodez son VIN.
Décoder un VINPresque tout ceci décrit l'année modèle, pas la voiture précise. Rien ici ne renseigne sur le kilométrage, les accidents ou la propriété de ce véhicule : aucun identifiant ne les encode.
On June 29th, 2023 at approximately 8:45 AM we were pulling into a parking space slowly tapping the brakes to slow and stop the vehicle. About 2/3 of the way into the parking stall around 3 or 4 feet from the curb, the vehicle actually accelerated while pressing the brake jumping the curb. We pressed on the brakes again and the car accelerated even faster crossing the sidewalk crashing into a building. We believe the brakes caused the SUA (Sudden Unintended Acceleration) accelerating the vehicle twice and the vehicle failed to apply the brakes. We believe this would've been caused by a computer error on the vehicle. We also believe the vehicle to initiate the two safety systems failed, Crash Imminent Braking & Dynamic Brake Support thus being able to avoid the accident. To the best of our knowledge, no warnings or alerts were displayed on the vehicle before the crash. We had BMW inspect the vehicle and no defective part was found and the black box indicated the vehicle was accelerating a few seconds before the crash. We do not disagree with this and informed BMW that the car was accelerating on it's own.
The contact owns a 2023 BMW X7. The contact stated that after placing the vehicle in reverse with the back-up assist feature activated, the vehicle struck the other vehicle behind. The contact stated that the automatic brake assist feature failed to operate as designed, causing the vehicle to strike the rear tire of the other vehicle. There was no warning light illuminated. The contact depressed the brake pedal, and the vehicle was able to stop. There was no damage to the other vehicle. The dealer was contacted, and the contact was able to schedule an appointment. Additionally, the contact was concerned about water on the screen and a possible electrical fire after the vehicle had gone through the car wash. The manufacturer was contacted and stated that the vehicle needed to be diagnosed by an authorized dealer. The failure mileage was 200.
I am requesting that BMW North America open a formal Customer Relations case regarding a front differential failure on my 2023 BMW X7 M60i. At approximately 60,000 miles, I began experiencing a whining/howling noise that increased with vehicle speed, along with a metallic grinding noise from the front drivetrain area. The vehicle was subsequently diagnosed, and during the diagnostic process the front differential fluid was drained and inspected. A significant amount of metal shavings and metallic debris was found in the differential oil, indicating internal component wear. I have photographs documenting the contaminated fluid and metal particles. As an initial attempt to address the issue, the front differential fluid was replaced. However, the fluid change did not improve the condition or eliminate the noises. Due to the continued symptoms and evidence of internal wear, the front differential ultimately required replacement. I am particularly concerned because this vehicle has been serviced exclusively by BMW since new and maintained in accordance with BMW's recommended maintenance schedule. To my knowledge, front differential fluid service is not included in BMW's standard maintenance program or service recommendations for this vehicle. As a result, I relied upon BMW's maintenance requirements and had no reason to believe additional preventative service was necessary. This X7 M60i is also our third BMW vehicle. The failure of a major drivetrain component on a properly maintained vehicle at approximately 60,000 miles was both unexpected and disappointing. I respectfully request that BMW North America review the diagnosis, repair records, and supporting photographs; determine whether similar failures have been reported on comparable X7 M60i vehicles; consider goodwill reimbursement for the front differential replacement; and conduct an engineering review of this failure for future tracking and analysis.
On May 28, 2025, my 2023 BMW X7 underwent BMW recall B340224. Repair Order 669956 specifically states: “0077067 REPLACING INTEGRATED BRAKING SYSTEM.” After this recall repair and replacement of the Integrated Braking System, the vehicle began experiencing abnormal and potentially dangerous braking behavior that did not exist before the recall repair. The brake pedal can initially feel unusually soft or have excessive travel, followed by sudden and aggressive braking. In slow traffic and stop-and-go driving, the brakes can also feel as if they are sticking or not releasing normally, causing the vehicle to jerk when stopping or starting. The problem is significantly worse in hot weather and heavy traffic. After approximately 10 miles of highway driving, the braking behavior may temporarily improve. I have repeatedly reported that these symptoms began after BMW replaced the Integrated Braking System under recall B340224. Despite multiple service visits and substantial repairs, the safety problem remains unresolved. Most importantly, I have repeatedly asked BMW to investigate the Integrated Braking System that was replaced under the recall as the possible source of the problem. BMW has not properly investigated or addressed that component despite the clear timing between the recall repair and the onset of the braking symptoms. Most recently, the vehicle was left with the BMW dealer for approximately one week regarding this continuing safety complaint, but no repair or meaningful inspection of the Integrated Braking System was performed before I retrieved the vehicle. The vehicle and the replaced braking system remain available for inspection. I am requesting that NHTSA investigate whether the Integrated Braking System replacement performed under recall B340224, or the recall remedy itself, may be related to this continuing braking safety defect.
The mechatronics unit failed in the automatic transmission. Vehicle was no longer in gear causing it to stall, and drivetrain warning message was produced. This happened twice in the same day July 6th 2026. BMW was contacted, they retrieved the vehicle. Since the problem was intermittent they scanned the vehicle logs and sent to BMW North America for diagnosis. Initial repair was reprogram. During the test drive vehicle stalled directly out side of dealership and was pushed back in. On July 20th vehicle was diagnosed with a failed mechatronics unit which controls the transmission internally. Repair was authorized and vehicle returned on July 25th. During a test drive I asked the lead technician if this was a common failure, he stated this is the third repair of this nature they have performed. After some research this part was responsible for a stop delivery order on other vehicles manufactured during certain build dates.
My [XXX] wife and I drove to a cardiac doctors appointment having just had a [XXX]. Upon arriving the passenger side door would not unlock. Tried opening with the interior door handle and it would still not open. Tried exterior door handle and could not open. Contacted BMW emergency they tried to remotely open did not work. Called dealership they said to try double pulling interior handle twice which of course we had already tried still wouldn’t open. MY WIFE WAS TRAPPED WITH NO WAY TO GET OUT decided to try driving to dealership rather than calling fire department. Upon arriving the service provider tried to open but couldn’t do so. All this time my wife is sitting there with no way out other than trying to literally drag her over the center console which would cause her great pain. The service provider asked us to wait until a mechanic got off lunch and hoped that he could help otherwise she said 911 would have to be called. When mechanic arrived he couldn’t open and said that he also couldn’t open door panel because door has to be open to do so. The interior door handle was frozen so he decided to pull with great force and a horrible breaking noise was made and the door finally opened. The estimate to repair was $2320.00. With great effort from my service provider and an assist from the dealership itself BMW agreed to pay most of bill and only charged for parts $94.33 which I paid. I BELIEVE THIS IS A MAJOR SAFETY VIOLATION. THE INTERIOR DOOR HANDLE SHOULD NOT LOCK UP AND BECOME NON OPERATIONAL .HAD THERE BEEN A FIRE OR UNDERWATER THERE WAS NO ESCAPE FOR MY WIFE. This is a 2023 BMW X7 61000 miles no accidents perfect condition INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The vehicle has a glare issue affecting the side mirrors, which impacts visibility while driving. The glare appears to be caused by reflective chrome trim on the dashboard near the air vent, which reflect light into the side mirrors under certain lighting conditions. this creates a safety concern and affects my ability to comfortably and confidently operate the vehicle. the issue has been demonstrated to the dealership on multiple occasions, including prior to June 17th, but does not appear to have been fully documented or resolved. i have also observed similar reflection behavior in other BMW vehicles once pointed out, suggesting this may be related to design or materials rather than an isolated issue. "This occurs intermittently depending on sun angle/lighting conditions",
I ATTEMPTED TO HAVE SAFETY RECALL 24V-104(INTEGRATED BRAKE SYSTEM MALFUNTION) PERFORMED AT BMW DEALERSHIP BMW AUSTIN, 7011 MCNEIL DR. AUSTIN, TX 78729-7687 PHONE (512)343-3570 ON AUGUST 28 2025 AT 11;00AM WITH JASON SANTOSUOSSO. THIS SERVICE ADVISORY TOLD ME THE RECALL IS NOT COVERED, BECAUSE MY VEHICLE HAS 36,100 MILES-JUST 100 MILES OVER THE 36,000-MILE FACTORY warranty. HE INFORMED ME THAT BMW 'DENIED" THE REPAIR AND THA I WOULD NEED TO PAY $1900. OUT OF POCKET, (INCLUEDE OIL CHANGE $329), EVEN THOUGH THIS A FEDERAL SAFETY RECALL. AS PER NHTSA REGULATIONS, RECALL REPAIRS MUST PERFORMED FREE OF CHARGE, REGARDLESS OF MILEAGE OR WARRANTY EXPIRATION, REFUSING TO PERFORM A BRAKE-RELATED SAFETY RECALL DUE TO MILEAGE IS NOT ONLY UNREASONABLE BUT APPEARS TO VIOLATE FEDERAL LAW. THE VEHICLE REMAINS UNREPAIRED AND POSES A POTENTIAL SAFETY RISK TO MYSELF AND OTHERS. I AM REQUESTIG THAT NHTSA INVESTIGATE THIS DENIAL OF SERVICE AND ENSUERE THAT BMW ANT ITS DEALERSHIPS COMPLY WITH THE RECALL LAWS.
We are the original Owner of a 2023 BMW X7 with 17,500 miles. The past 2+ months the screen/display will go blank for up to 30 seconds while driving the vehicle. Obviously this is a serious safety issue. We took the vehicle for service where it was originally purchased at BMW I will say, this issue is very disappointing, scary, and disturbing. The vehicle was originally brought into service on 7/3 and no resolution for the problem has been presented as of yet. According to the Service Advisor, multiple software updates have been applied and the screen/display has been replaced twice, still no resolution. Brought back into Dealership on 7/23/2025 for the same repeated and dangerous issue Brought back again on 8/3/2025 for the same repeated issue. We were promised it was fixed. Drove the car 4 hours, and once again the screen/display went blank.
> Seller: RHollenshead Auto Sales Inc. > Auction Listing: [XXX] (Simulcast Live, Sale Date: [XXX]). > Violation: Auctioning 2023 BMW X7 (VIN: * [XXX] **) with **OPEN Recall 24V-104** (brake defect). > Law Broken: 49 U.S.C. § 30120. > Demand: Enforce repair. > Evidence: BMW VIN check confirms open recall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Recall has been active since Feb 2024 and no fix has been made available.
The contact owns a 2023 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2023 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2023 BMW X7. The contact received notification of NHTSA Campaign Number: 24V104000 (Electronic Stability Control (ESC), Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Recall 24V-104 was issue in February 2024 and no remedy is available as of October 2024
Déposées par des propriétaires de cette année modèle et non vérifiées par la NHTSA : le témoignage d'une personne, pas un fait établi.
BMW of North America, LLC (BMW) is recalling certain 2025 Mini Cooper S, Mini Countryman S All4, X2, 2024 Rolls-Royce Spectre, 2023-2025 i7, 7 Series, X7, 2024-2025 i5, 5 Series, 2023-2024 XM, X1, 2024-2025 X6, and X5 vehicles. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Solution : The Integrated brake system will be inspected and, if necessary, replaced, free of charge. Owner notification letters are expected to be mailed August 21, 2026. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce customer service at 1-877-877-3735. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning August 21, 2026. Vehicles previously repaired under recall 24V739 or 24V104 will need to have the new remedy completed.
BMW of North America, LLC. (BMW) is recalling certain 2023-2024 X1, X5, X6, X7, XM, 530i, i5, 740i, 760i, i7, and 750e vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Solution : Dealers will replace the integrated brake module, free of charge. Interim owner notification letters notifying owners of the safety risk are expected to be mailed November 22, 2024. Second letters will be mailed once the parts are available. Owners may contact BMW customer service at 1-800-525-7417. Vehicles in this recall were previously repaired under recall number 24V-104 and will need to have the new remedy completed.
BMW of North America (BMW) is recalling certain 2023-2024 X1, 2024-2025 X5, 2025 X6, 2023-2025 X7, 740i, 760i, 2024 XM, 530i, 540i, i7, 750e, X2, 2024-2025 i5, 2024 Rolls Royce Spectre, 2025 MINI Countryman S ALL4, JCW Countryman ALL4, and 2025 MINI Hardtop 2 Door (Cooper, Cooper S) vehicles. Please refer to the recall report for the complete list of models. The welds in the servomotor of the integrated brake control module may break, causing a loss of power brake assist and rear brake function. In addition, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function.
Solution : Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed November 13, 2024. Owners can contact BMW Customer Service at 1-800-525-7417.
BMW of North America, LLC. (BMW) is recalling certain 2023-2025 BMW, MINI, and Rolls-Royce vehicles. Please see the recall report for a complete list of models and model years. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Solution : Dealers will replace the integrated brake system, free of charge. Owner notification letters were mailed between June and December 2024. Owners may contact BMW customer service at 1-800-525-7417 or Rolls Royce customer service at 1-877-877-3735.
BMW of North America, LLC (BMW) is recalling certain 2023 X7 M60i and XM vehicles. The fasteners that connect the exhaust system and the catalytic converter may not have been tightened correctly.
Solution : Dealers will replace the gasket between the exhaust system and the catalytic converter, and tighten the fasteners, free of charge. Owner notification letters were mailed June 22, 2023. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2023 X5 sDrive40i, xDrive40i, xDrive45e, and X7 xDrive40i vehicles. The windshield may not have been properly bonded to the vehicle which could allow water to enter the vehicle and contact electrical components, possibly resulting in a short-circuit.
Solution : Dealers will inspect the windshield seal and as necessary, remove and reinstall the windshield with a new seal, free of charge. Owner notification letters were mailed December 30, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2023 X7 xDrive40i, and X7 M60i vehicles. In certain vehicle operating conditions, only one of the two front parking lights may remain illuminated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, "Lamps, Reflective Devices, and Associated Equipment."
Solution : Dealers will reprogram the electronic control unit for the front parking lights, free of charge. Owner notification letters were mailed November 18, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022 4 Series Gran Coupe (430i, 430i xDrive, M440i xDrive); 2019-2022 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M; 2021-2022 X5 xdrive45e; 2020-2022 X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6M and 2019-2023 X7 xDrive40i, X7 xDrive50i, X7 M50i, X7 xDrive60i, X7 M60i, X7M, Alpina XB7 vehicles. The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 118, "Power-Operated Window Systems."
Solution : Dealers will reprogram the roof function control unit, free of charge. Owner notification letters were mailed June 20, 2022. Owners may contact BMW customer service at 1-800-525-7417.
Publiés par année modèle et non par VIN : ils peuvent ne pas concerner ce véhicule, ou avoir déjà été effectués. À confirmer auprès d'un concessionnaire.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Rapprochés par marque et nom de modèle — Safety Gate ne publie pas de VIN. Vérifiez les dates de production et indiquez le code de rappel au concessionnaire.