14 rappels et 149 signalements de propriétaires enregistrés pour cette année modèle.
Cette page décrit le modèle. Pour savoir comment une voiture précise est équipée et si son identifiant est valide, décodez son VIN.
Décoder un VINPresque tout ceci décrit l'année modèle, pas la voiture précise. Rien ici ne renseigne sur le kilométrage, les accidents ou la propriété de ce véhicule : aucun identifiant ne les encode.
TL* THE CONTACT OWNS A 2010 BMW X5. WHILE DRIVING AT APPROXIMATELY 40 MPH, THE CONTACT CRASHED INTO ANOTHER VEHICLE. THE AIR BAGS FAILED TO DEPLOY. AS A RESULT, THE CONTACT SUSTAINED CHEST, NECK, AND ARM INJURIES THAT REQUIRED MEDICAL ATTENTION. A POLICE REPORT WAS FILED. THE VEHICLE WAS TOWED TO AN INDEPENDENT MECHANIC. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 60,000.
MY WIFE WAS DRIVING 40 MPH HIT AN ON COMING VEHICLE IN THE FRONT AIR BAGS DID NOT DEPLOY. ENTIRE FRONT OF TRUCK IS DESTROYED VEHICLE CAN NOT BE DRIVEN.
The contact owns a 2010 BMW X5. The contact stated that the vehicle had been parked and unoccupied for almost twelve hours, upon returning to the vehicle the battery was completely drained. The vehicle was jumpstarted and then driven to the residence. The contact stated that while pulling into the driveway at the residence, he smelled something hot coming from the vehicle. The contact exited the vehicle and saw flames underneath the vehicle. The contact stated that the flames were coming from the fuel filter heater. The contact removed several items from the vehicle before connecting a nearby garden house and extinguished the fire. No injuries were sustained. The Fire Department was not notified of the fire. A Police report was not filed. The contact stated that the vehicle was no longer drivable. The vehicle was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 13V339000 (FUEL SYSTEM, DIESEL); however, the VIN was not included in the recall. The manufacturer was notified of the failure but offered no assistance. The failure mileage was approximately 148,000.
I DROVE MY BMW X5 TO WORK WAS THERE FROM 1045 AM TO AROUND 730PM DROVE TO THE STORE ABOUT A MILE AWAY THEN DROVE TO THE GAS STATION PUT GAS IN, THEN DRIVE TO A NEAR BY OUTSIDE MALL. WENT IN FOR ABOUT 15 MINS CAME OUT MY WINDOWS WERE COMPLETELY "FOGGED" OPEN THE DOOR AND SMOKE CAME ROLLING OUT. OPEN ALL THE DOORS TO LOCATE THE FIRE OPEN THE BACK AND FLAMES CAME SHOOTING OUT FROM UNDER THE BACK PANEL. I OPEN IT AND TRIED TO PUT OUT THE FIRE WITH SOME NEAR BY CLOTHES. A BYSTANDER RAN INTO THE STORE TO GET A FIRE EXTINGUISHER AND PUT OUT THE FIRE. THE FIRE DEPARTMENT WAS CALLED. TOOK PICTURES AND SAID IT WAS THE BATTERY THAT STARTED ON FIRE.
TL* THE CONTACT OWNED A 2010 BMW X5. WHILE DRIVING 35 MPH, THE CONTACT OBSERVED AND SMELLED SMOKE. THE CONTACT PULLED THE VEHICLE INTO A PARKING LOT WHERE IT CAUGHT FIRE. THERE WERE NO WARNING INDICATORS ILLUMINATED PRIOR TO THE FAILURE. THERE WERE NO INJURIES. THE VEHICLE WAS DESTROYED. THE FIRE DEPARTMENT EXTINGUISHED THE FIRE. A POLICE REPORT WAS FILED. THE MANUFACTURER WAS NOT NOTIFIED. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 17V683000 (ENGINE AND ENGINE COOLING) AND WAS INFORMED PARTS WERE NOT AVAILABLE. THE FAILURE MILEAGE WAS 47,000. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
TL* THE CONTACT OWNS A 2010 BMW X5. WHILE DRIVING 30 MPH, THE ENGINE SHOOK, SMOKE APPEARED, AND THE ENGINE STALLED. THERE WAS NO FIRE. THE ENGINE MALFUNCTION INDICATOR ILLUMINATED. THE VEHICLE WAS TOWED TO BMW OF DENVER DOWNTOWN (1040 S COLORADO BLVD, DENVER, CO 80246 (303) 954-4856) WHERE IT DIAGNOSED THAT THE SECONDARY FUEL PUMP AND THE FUEL INJECTORS NEEDED TO BE REPLACED. THE VEHICLE WAS REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 53,220.
TL* THE CONTACT OWNS A 2010 BMW X5. THE CONTACT STATED THAT THE VEHICLE FAILED TO START AND A FUEL AND SMOKE ODOR WAS PRESENT. IN ADDITION, BLACK SMOKE EMITTED FROM THE EXHAUST PIPE. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 89,000.
MY BMW 2010 X5 DIESEL CAUGHT ON FIRE IN THE CENTER CONSOLE AREA AFTER ONLY A FEW MINUTES AFTER DRIVING CAR. THE SOURCE OF THE FIRE SEEMED TO ORIGINATE UNDER THE CENTER CONSOLE CARGO AREA AS A HOLE ABOUT THE SIZE OF THE QUARTER WAS BURNED UP THOUGH THE BOTTOM OF THE CARGO AREA. THE INITIAL INDICATOR OF THE PROBLEM INCLUDED SMOKE COMING THROUGH VENTS. ADDITIONAL PROBLEMS OCCURRED WHEN ATTEMPTING TO STOP THE CAR AS IT WAS DIFFICULT TO PUT IT IN PARK WHILE IT WAS ON FIRE. WHEN EXITING THE VEHICLE FLAMES WERE COMING OUT OF THE CARGO AREA. THE CAR WAS VERY GOOD SHAPE OTHERWISE WITH NO PROBLEMS AND THE CAR HAS BEEN IN FOR SERVICE IN THE BEGINNING OF THE YEAR. THE CAR IS CURRENTLY STILL UNDER WARRANTY. *TR
The contact owns a 2010 BMW X5. The contact stated that while driving at an undisclosed speed, the vehicle stalled and was pulled over to the side of the road. There was no warning light illuminated. The vehicle was towed to be repaired under NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, after the recall repair was performed, the vehicle failed to start. The contact stated that the recall repair indicated that a diagnostic test was required to determine that an engine failure was a direct result of a fractured VANOS bolt. The contact stated that the dealer declined a diagnostic test or the repair. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 135,000.
My husband and I brought our 2010 X5 (VIN ), mileage: to BMW of El Cajon on 09/29/2025 for a recall service. Before the recall repaire, the vehicale was in normal working condition: -No check engine lights or warning indicators -No unusual noises -Fully drivable on a daily basis After the recall was completed, the dealership informed me that: -multiple check engine/warning lights appeared -The vehicle developed a very loud/high pitch noise -They do not recommend driving the vehicle in its currently condition. They did not warn us about his initial, they did after informed them we do not feel safe driving the car in this condition. The dealership explained this happened because they had open a valve to perform the recall, which they claim disturbed "sludge". They are now refusing to correct the problem unless we pay out of pocket. The issue did not exist before the recall and occurred only as a direct result of the recall repair. The recall left my car unsafe and undriveable, and I am being told to pay for a problem that only arose due to a federally mandated recall work. The recall resulted in a vehicle that is no longer safe to drive, with multiple warning lights and severe engine noise. The dealers refusal to fix this without charing me undermines the purpose of a recall, which is to ensure safety at no cost to the owner. I ask NHTSA to investigate this matter and ensure BMW and its dealerships perform recall repairs properly, at no cost to consumers, and do not return vehicles in unsafe conditions.
I own a 2010 BMW X5 xDrive30i (VIN: [XXX] ) with two active recalls: the VANOS bolt recall (23V-707) and the PCV valve heater recall (22V-119). Despite these being federally mandated safety repairs, Sharpe BMW in Grand Rapids, MI refused to perform the work without a paid diagnostic and potential full repair payment upfront, stating reimbursement would be decided afterward. I was sent home in an unsafe, recalled vehicle that visibly and audibly shakes at startup and frequently stalls. Other engine components have now failed due to the VANOS issue and the vehicle is now inoperable. BMW NA has acknowledged contact, but has only redirected me back to the same dealer without offering resolution. This has created financial hardship and an ongoing safety concern. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2010 BMW X5. The contact stated while starting the vehicle, after several minutes the vehicle failed to turn off as needed. There was no warning lights illuminated. The vehicle was towed to an independent mechanic where it was diagnosed that metal shavings were found in the engine, and the oxygen heat sensor had failed. The vehicle was repaired. The contact advised the previous owner was notified of NHTSA Campaign Number: 16V746000 (FUEL SYSTEM, GASOLINE). The contact was not aware of the recall notification. The contact stated that the prior owner had the recall repair performed; however, the failure occurred. The manufacturer was not notified of the failure. The failure mileage was 127,911.
The contact owns a 2010 BMW X5. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently lost motive power. The contact was able to pull over to the shoulder of the roadway, where the vehicle failed to restart. The check engine warning light was illuminated. The vehicle was towed to an independent mechanic, who diagnosed a failure with the fuel pump. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); was included and the vehicle was repaired by the dealer. The contact stated that the vehicle operated normally prior to the repair. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 128,000.
The contact owns a 2010 BMW X5. The contact stated that while the vehicle was parked, her nephew attempted to start the vehicle, and the vehicle failed to start. The contact stated there was an abnormal odor coming from the vehicle. The check engine warning light was illuminated. The contact replaced the battery; however, the vehicle failed to restart. The vehicle was towed to Firestone, where it was diagnosed that the starter and fuel pump had failed and needed to be replaced. The vehicle was not yet repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 116,546.
The contact owns a 2010 BMW X5. The contact received notification of NHTSA Campaign Number: 23V707000 (Engine and Engine Cooling); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that when the vehicle wase cold started the vehicle was idling rough and vibrating abnormally. The contact stated that check engine warning light was illuminated. The contact stated while driving approximately 35 MPH, the vehicle was running rough, with abnormal sounds coming from underneath the floor. The contact stopped the vehicle and towed the vehicle to residence. The vehicle was not taken to a dealer or independent mechanic. The vehicle was not diagnosed or repaired. The failure mileage was 200,000. Parts distribution disconnect.
Déposées par des propriétaires de cette année modèle et non vérifiées par la NHTSA : le témoignage d'une personne, pas un fait établi.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The stated maximum load specified in the user manual is incorrect. This could cause users to overload the vehicle, potentially leading to damage to the car and an increased risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Rapprochés par marque et nom de modèle — Safety Gate ne publie pas de VIN. Vérifiez les dates de production et indiquez le code de rappel au concessionnaire.
4 rappels comportent un avertissement de ne pas conduire ou de stationner dehors. Vérifiez si ce véhicule a déjà été traité avant de le conduire ou de le garer.
BMW of North America, LLC (BMW) is recalling certain 2010-2012 1 Series Coupe, 1 Series Convertible, 3 Series Sedan, 3 Series Convertible, 2010-2011 3 Series Sportswagon, 3 Series Coupe, 5 Series Sedan, X3 xDrive 28i, X3 xDrive 30i, X5 xDrive30i, and Z4 sDrive30i vehicles. The aluminum bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and possibly break.
Solution : Dealers will replace the four VANOS bolts, free of charge. Interim letters notifying owners of the safety risk are expected to be mailed December 18, 2023. Owner notification letters were mailed June 19, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Solution : BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2009-2012 X5 xDrive35d, 2008-2012 X6 xDrive35i, X6 xDrive50i and X6 M, 2007-2012 X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M and 2010-2011 X6 ActiveHybrid vehicles equipped with non-desiccated, passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSPI-2) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Solution : Owners are advised not to drive their vehicles until this remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag, free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M vehicles, 2008-2014 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, 2009-2013 X5 xDrive35d vehicles and 2010-2011 X6 ActiveHybrid vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Solution : Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 14, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2009-2013 X5 xDrive 35d diesel vehicles. The engine idler pulley bolt may loosen over time and break.
Solution : BMW will notify owners, and dealers will replace the idler pulley bolt with an improved part, free of charge. The recall began March 11, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2011-2012 BMW 550i, 550i xDrive, 550i Gran Turismo, 550i Gran Turismo xDrive, 750i, 750Li, 750i xDrive, 750Li xDrive, 760Li, X5 xDrive50i, X5 M, X6 xDrive50i, X6 M, ActiveHybrid7, MINI Cooper S Convertible, John Cooper Works (JCW) Convertible, Cooper S Countryman, Cooper S Countryman ALL4, Cooper S, JCW, Cooper S Clubman, JCW Clubman, Cooper S Roadster, JCW Roadster, Cooper S Coupe, JCW Coupe and Rolls-Royce Ghost, 2011 BMW X6 Hybrid and 2012 BMW 650i Coupe, 650i xDrive Coupe, 650i Convertible and 650i xDrive Convertible vehicles. The electric auxiliary water pump may fail and cause the circuit board to overheat.
Solution : BMW will notify owners, and dealers will replace the electric auxiliary water pump, free of charge. Depending on the model, there are currently limited parts available, however not all parts are available at this time. Owners will be notified of the recall beginning June 11, 2018, and will receive a second notification when remedy parts become available. Owners may contact BMW customer service at BMW 1-800-525-7417, MINI at 1-866-825-1525, or Rolls-Royce at 1-877-877-3735. Note: BMW recommends that owners park their vehicle outdoors until the recall remedy has been performed.
BMW of North America, LLC (BMW) is recalling certain 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, 2009-2010 X5 xDrive35d vehicles and 2009-2013 X6 xDrive35i, X6 xDrive50i, and X6 M vehicles ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." BMW is also recalling certain 2007-2010 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X5 xDrive35d, X6 xDrive35i, X6 xDrive50i and X6M vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." BMW is also recalling certain 2007-2009 X5 xDrive30i, X5 xdrive35i, X5 xDrive48i, X5 xDrive50i, X5 M, X5 xDrive35d, X6 xDrive35i, X6 xDrive50i and X6M vehicles ever registered in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Solution : Owners are advised not to drive their vehicles until the remedy is performed. BMW will notify owners, and dealers will replace the passenger front air bag module, free of charge. The recall is expected to begin March 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Solution : BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 BMW X5 3.0si, X5 4.8i, X5 M, X5 xDrive30i, X5 xDrive35i, X5 xDrive48i and X5 xDrive50i, 2008-2011 X6 x Drive35i, X6 xDrive50i and X6 M, 2010-2011 X6 ActiveHybrid, 535i xDrive Gran Turismo, 535i Gran Turismo, 550i xDrive Gran Turismo and 550i Gran Turismo, 2011-2012 528i, 535i, 535i xDrive, 550i and 550i xDrive and 2012 535i ActiveHybrid, 640i Convertible, 650i Convertible, 650i xDrive Convertible, 650i Coupe and 650i Coupe xDrive vehicles. The affected vehicles have in-tank fuel pumps that may have insufficiently crimped wire contacts.
Solution : BMW will notify owners, and dealers will replace the fuel pump module, free of charge. The recall began February 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2007-2011 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, 2009-2011 X5 xDrive35d vehicles, 2008-2011 X6 xDrive35i, X6 xDrive50i and X6 M vehicles, and 2010-2011 X6 ActiveHybrid vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, BMW is recalling certain model year 2007-2008 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5M vehicles, and 2008 BMW X6 xDrive35i, X6 xDrive50i and X6 M vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Vehicles of these model years and models that were not originally sold or ever registered in either Zones A or B are not subject to this safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to high absolute humidity and temperature cycling.
Solution : Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger frontal air bag inflator or air bag module, free of charge. The recall began July 28, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW is recalling certain model year 2009-2010 X5 xDrive35d vehicles equipped with a diesel engine and manufactured from June 13, 2009, through November 9, 2009. The fuel filter heater, which is used for warming up the diesel fuel during vehicle operation at low outside temperatures, could experience an electrical overload condition and become permanently activated.
Solution : BMW will notify owners, and dealers will replace the fuel filter heater, free of charge. The safety recall began on September 26, 2013. Owners may contact BMW customer relations at 1-800-525-7417.
BMW IS RECALLING CERTAIN MODEL YEAR 2011 5-SERIES, MODEL YEAR 2010-2011 5-SERIES GRAN TURISMO, MODEL YEAR 2009-2011 7-SERIES, MODEL YEAR 2010-2011 X5 SAV, AND MODEL YEAR 2008-2011 X6 SAV VEHICLES EQUIPPED WITH 8- OR 12-CYLINDER, TURBOCHARGED, ENGINES BECAUSE THE CIRCUIT BOARD FOR THE ELECTRIC AUXILIARY WATER PUMP CAN OVERHEAT.
Solution : BMW WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE AUXILIARY WATER PUMP FREE OF CHARGE. THE SAFETY RECALL BEGAN ON DECEMBER 19, 2011. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AND SERVICES AT 1-800-525-7417.
BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 M SAV VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT," THESE VEHICLE'S WERE EQUIPPED WITH SIDE MARKER LAMPS, BUT NOT THE POWER SUPPLY CABLES LEADING TO THE LAMPS. AS A RESULT, THE SIDE MARKER LAMPS DO NOT ILLUMINATE.
Solution : BMW WILL INSTALL POWER SUPPLY CABLES FOR THE FRONT SIDE MARKER LAMPS. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING MAY 2010. OWNERS MAY CONTACT BMW AT 800-525-7417.
BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 AND X6 SPORT ACTIVITY VEHICLES MANUFACTURED BETWEEN DECEMBER 14, 2009 AND DECEMBER 16, 2009. IN THE UPPER RIGHT AREA OF THE WINDSHIELD, BONDING MAY BE INSUFFICIENT OVER A LENGTH OF APPROXIMATELY 50CM.
Solution : BMW WILL NOTIFY OWNERS AND AUTHORIZED DEALERS WILL REMOVE THE WINDSHIELD AND THEN REINSTALL WITH THE PROPER BONDING FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 30, 2010. OWNERS MAY CONTACT BMW AT 1-800-525-7417.
Publiés par année modèle et non par VIN : ils peuvent ne pas concerner ce véhicule, ou avoir déjà été effectués. À confirmer auprès d'un concessionnaire.