2019 Ford Transit
9 recalls and 0 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN9 recalls and 0 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model year information. The retractors may not lock, preventing the wheelchair from being properly secured.
Remedy: Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.
Remedy: Dealers will inspect and replace the rearview camera as necessary, free of charge. Owner notification letters were mailed January 13, 2026. Ford owners will receive letters in phases, beginning January 2026 and June 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S89. This recall expands previous NHTSA recall number 25V270. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning September 8, 2025.
Ford Motor Company (Ford) is recalling certain 2015-2020 Transit vehicles. An incorrect driveshaft torsional damper service kit may have been installed, which can allow the damper shield to contact the parking brake cable, possibly resulting in parking brake failure.
Remedy: Dealers will replace the passenger side parking brake cable with a cable that provides sufficient clearance to the damper shield, free of charge. Interim owner notification letters were mailed on September 24, 2021. Owner notification letters were mailed on March 14, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S39.
Ford Motor Company (Ford) is recalling certain 2019 Transit T150, T250, T350 vehicles equipped with aluminum alloy wheels. The wheel mounting surface of the axle flange may be warped and cause the wheel studs to fracture.
Remedy: Dealers will inspect and if necessary, replace the rear axle shaft assembly, axle shaft mounting bolts, and rear wheel lug nuts, free of charge. Owner notification letters were mailed on June 28, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S21.
National Van Builders, Inc. (National Van Builders) is recalling certain vehicles based on 2019-2020 Ford Transit and 2019 Ram Promaster vans equipped with Freedman GO-ES foldaway seats. The seat belt retractor block out zone may have not been set correctly, potentially resulting in a seat belt that may not properly secure the occupant. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."
Remedy: National Van Builders will notify owners, and dealers will replace the retractors, free of charge. The recall began May 19, 2020. Owners may contact Freedman customer service at 1-800-443-4540 or National Van Builders customer service at 1-800-527-7477.
TransitWorks is recalling certain Driverge vehicles based on 2019-2020 Ford Transit vans equipped with Freedman Seating Company (FSC) PT Foldaway and GO-ES 3-point Foldaway seats. The seat belt retractor block out zone may have not been set correctly, potentially resulting in a seat belt that may not properly secure the occupant. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."
Remedy: TransitWorks will notify owners, and dealers will replace the retractors, free of charge. The recall began May 13, 2020. Dealers can contact Freedman Seating Company for parts and reimbursement information at 1-800-443-4540.
LA West Inc. (LA West) is recalling certain 2018-2019 Ford Transit vehicles modified to be equipped with glass roof hatches. Temperature and vibration stresses may cause the tempered glass roof hatch to shatter.
Remedy: LA West will notify owners, and dealers will replace the hatch lids, free of charge. The recall began July 11, 2019. Owners may contact LA West customer service at 1-704-498-4940.
TransitWorks is recalling certain 2015-2018 Ford Transit, 2018 Ford Transit Connect, and 2016 Dodge Ram ProMaster vehicles modified to be equipped with Freedman Seating GO-ES seats. When the back seat cushion is rotated from the stowed position to the upright position, the seat cushion may not remain locked into place when under load, such as in a crash or a sudden stop.
Remedy: TransitWorks has notified owners and instructed them to contact Freedman seats for a repair kit. The recall began December 19, 2019. Owners may contact Freedman Seating customer service at 1-800-443-4540 or TransitWorks customer service at 1-855-337-9543.
XL Hybrids, Inc (XL) is recalling certain 2015-2018 Ford Transit vehicles modified to be equipped with XL's electric hybrid system. The cardan (universal) joint on the front driveshaft may fail, possibly causing the front driveshaft to detach.
Remedy: XL will notify owners, and dealers will replace the front driveshaft with an updated one, free of charge. The recall began April 15, 2019. Owners may contact XL Hybrid's customer service at 1-833-953-5338.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The rear brake pipe may not be properly secured, which could lead to a loss of brake fluid and potential failure of the brake circuit. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear shock absorbers could break and impair driving stability, which could damage the rear brake line and/or cause a release of the coil spring. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A bent anode plate on the high-voltage battery cells could lead to a short circuit, consequently leading to engine failure and the shutdown of the battery, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The reversing camera may freeze giving the false impression that the area behind the vehicle is clear, despite the presence of people or obstacles there. This may increase the risk of accident and injury. In addition, warning messages such as parking sensor failure and emergency calls can be displayed in the instrument cluster during operation. Systems controlled via the centre screen, such as heating, seat heating and ventilation, may also be inoperable. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A wiring harness comes into contact with the brake lines. This may lead to wear, corrosion and a leak in the brake lines and to reduced braking performance, which may lead to an increased risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
One or more bolts on the bottom cover of the power distribution board can break and may lead to various electrical malfunctions. This can lead to the vehicle catching fire due to an increased resistance. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Some seat screws may not be properly tightened, leading the seat to become loose. This can make the restraining devices less effective, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The fuel line may chafe against surrounding components and develop a leak. Fuel leaking onto hot components in the engine compartment may ignite and cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A front suspension bolt may have been overtightened during manufacturing, weakening it over time. If the bolt breaks, steering control and braking performance may be reduced, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The handbrake may slip, causing a complete loss of holding power. This could allow the vehicle to roll away unintentionally, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A contact between the coupling nut of the brake line and the fuel tank may cause a leak in one of the brake lines. This can lead the fuel tank to become damaged and fuel to leak, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Insufficient distance between the wiring harness and the transmission housing may result in damage to cables. The power-assisted steering may fail. There is a risk of fire due to short circuits and a risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear axle may not be sufficiently lubricated, leading to a malfunction of the wheel bearings which can cause the rear wheels to lock. This can provoke a loss of vehicle's control, increasing the risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Gas may be released from the 12V battery into the vehicle cabin area. Inhalation of the released gas may cause adverse health effects to the cabin occupants and cause an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The bolts on the rear brake drums are not tightened to the specified torque. This may cause brake fluid leakage and/or brake or wheel jamming, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Leakage from the fuel rail may cause fuel to be released, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A faulty part within the high-voltage battery cells could cause the battery to short-circuit and cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Improper cleaning of the components during primer application can leave contaminants like silicone, which weakens the adhesion of the glass roof plate. This may cause wind noise, water leaks, and potential detachment of the roof from the vehicle, increasing the risk of accidents and injuries to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The braking system may have been contaminated with mineral oil. This can lead to the swelling of rubber components in the braking system (hydraulic seals, brake hoses, etc.) causing the braking system to lack hydraulic pressure. This can result in longer brake pedal travel and reduced braking performance, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicles have been manufactured with a trailer coupling assembly that cannot withstand the declared towable mass. This can lead the trailer to separate from the towing vehicle, which creates serious risk of accidents and injuries to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cabling of the steering column may have an error, that can lead to a short circuit and thereby to a loss of power in the vehicle. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.