2016 BMW M3
3 recalls and 5 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN3 recalls and 5 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2016-2017 BMW M3 Sedans, 2016-2017 BMW M4 and M4 GTS Coupes and 2017 BMW M4 Convertible vehicles. The connection between the driveshaft and the flange may fail resulting in a loss of propulsion.
Remedy: BMW will notify vehicle owners, and dealers will replace the driveshaft, free of charge. The recall began April 9, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW North America, LLC (BMW) is recalling certain model year 2016 BMW M2 Coupe vehicles, 2015-2017 M3 Sedan vehicles and 2015-2016 M4 Coupe and M4 Convertible vehicles. During servicing of the rear differential for a prior service action, the rear sub-frame bolts may have been reused instead of being replaced. Reuse of the existing bolts may cause the bolts to loosen.
Remedy: BMW will notify owners, and dealers will replace the rear sub-frame bolts with new bolts, free of charge. The recall began on November 3, 2016. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2015-2016 M3 Sedan vehicles manufactured May 30, 2015, to September 2, 2015, 2016 M4 Coupe vehicles manufactured July 3, 2015, to September 11, 2015, and 2015-2016 M4 Convertible vehicles manufactured May 29, 2015, to August 4, 2015. The affected vehicles have a driveshaft with a slip-joint that may not have been filled with grease. As a result, the slip-joint may fail over time.
Remedy: BMW will notify owners, and dealers will inspect the driveshaft, replacing it as necessary, free of charge. The recall began on January 14, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The accumulator in the driver/passenger head airbag inflator can leak, preventing the airbag to fully deploy if activated in an accident, impairing the protective effect of the airbag. Moreover, the accumulator can detach, entering the interior of the vehicle or becoming detached from the vehicle. This can lead to an increased risk of injury for passengers and/or other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
THERE'S A KNOWN ISSUE WITH 2015+ BMW F80 M3 S55 ENGINE. THE ISSUE IS THE CRANK HUB SPINNING OUT AND DAMAGING THE CAR. IT LEAVES THE VEHICLE IN A DANGEROUS STATE WHEN DRIVING ON THE ROAD AND TO OTHERS NEAR BY. THIS ISSUE HAPPENS TO STOCK VEHICLES AND MODDED ONES. IF THE CRANK HUB SPINS WHILE THE CAR IS MOVING, IT CAN LEAVE THE CAR IN A DANGEROUS STATE WITH NO POWER. LINKS ABOUT IT: HTTPS://WWW.YOUTUBE.COM/RESULTS... SPECIFIC VIDEO THAT EXPLAINS THE CRANK HUB ISSUE WITH THIS MODEL OF A CAR: HTTPS://YOUTU.BE/SJR3ZHEGS_U?T=160 THIS ISSUE HAS PERSONALLY HAPPENED ON MY M3. I WAS COASTING DOWN A HILL TOWARDS A GREEN STOPLIGHT, AND A DRIVETRAIN MALFUNCTION ERROR POPPED UP ON MY SCREEN. I IMMEDIATELY PUSHED IN THE CLUTCH, AND WITHIN 1 SECOND MY ENGINE TURNED OFF. MY CAR WAS LEFT WITH NO POWER, THE ENGINE WOULD NOT RESTART. I GOT THE CAR HOME BY TOWING IT, THEN USING A WINCH TO GET IT IN MY GARAGE. I USED MY OBD2 READER TO READ THE DTC'S AND ALL THE CODES THAT CAME UP WERE DIRECTLY RELATED TO THE CRANK HUB SPINNING. IT WAS DANGEROUS BECAUSE I WAS APPROACHING A BUSY INTERSECTION. I HAD TO PUSH MY CAR OUT OF THE INTERSECTION. I WAS NOT INJURED, I DID NOT CRASH, AND I DID NOT LOSE CONTROL. ALTHOUGH IF I WAS GOING AT A HIGHER RATE OF SPEED, IT WOULD BE EASY TO LOSE CONTROL FROM THIS ISSUE.
THE CRANKHUB ON THESE CARS ARE TICKING TIME BOMBS AND IS LIKELY TO FAIL JUST OUTSIDE OF WARRANTY FORCING HUGE REPAIR BILLS. IN SOME CASES, A "LUCKY" FEW JUST NEED TO BE RETIMED AND ONLY REQUIRE 18 HOURS OF LABOR. HOWEVER, OTHERS HAVE NOT BEEN SO LUCKY AND HAVE REQUIRED AN ALL-NEW ENGINE. THIS IS AN ISSUE BMW IS FULLY AWARE OF BUT HAS NOT TAKEN RESPONSBILITY FOR THEIR INSUFFICIENT ENGINEERING.
THERE'S A KNOWN ISSUE WITH 2015+ BMW F80 M3 S55 ENGINE. THE ISSUE IS THE CRANK HUB SPINNING OUT AND DAMAGING THE CAR. IT LEAVES THE VEHICLE IN A DANGEROUS STATE WHEN DRIVING ON THE ROAD AND TO OTHERS NEAR BY. THIS ISSUE HAPPENS TO STOCK VEHICLES AND MODDED ONES. IF THE CRANK HUB SPINS WHILE THE CAR IS MOVING, IT CAN LEAVE THE CAR IN A DANGEROUS STATE WITH NO POWER. LINKS ABOUT IT: HTTPS://WWW.YOUTUBE.COM/RESULTS... SPECIFIC VIDEO THAT EXPLAINS THE CRANK HUB ISSUE WITH THIS MODEL OF A CAR: HTTPS://YOUTU.BE/SJR3ZHEGS_U?T=160
KEEP HEARING A KNOCKING SOUND ON DRIVER SIDE WHEN GOING OVER BUMPS. FEELING VIBRATION UNDER CAR UNDER ACCELERATING AND BREAKING. CARBON FIBER ROOF LAMINATE PEELING OFF.
I'VE TAKEN MY VEHICLE IN TO THE SERVICE DEALER MULTIPLE TIMES SINCE I'VE PURCHASED THE CAR BACK IN NOV. 2016. I NOTICED A CLUNKING AND JOLTING SENSATION FROM MY REAR AXLE WHICH I KNEW WAS NOT NORMAL. THE DEALER AFTER DIAGNOSING THE ISSUE TOLD ME IT IS NORMAL AND THERE ISN'T AN ISSUE AT ALL. UPON FURTHER RESEARCH ONLINE AND PERSONAL FRUSTRATION KNOWING I'M PAYING FOR A NEW CAR WHICH DOESN'T FEEL NEW AT ALL, I FOUND THE ATTACHED RECALL NOTICE. MY CAR HAS A PRODUCTION DATE OF MAY 20, 2016 WHICH FALLS IN BETWEEN THE TIMELINE MENTIONED IN THE ATTACHED RECALL MEMO WHICH WILL REQUIRE A REPLACEMENT OF THE REAR DIFFERENTIAL. ALSO, SEARCHING ONLINE ON THE BMW M3 FORUMS, MANY OTHER OWNERS OF THIS SIMILAR VEHICLE HAVE SUCH AN ISSUE AND I AM WORRIED THIS MIGHT ALSO POSE A SAFETY THREAT TO ME. FOR THESE REASONS, I AM SUBMITTING THIS FORM HERE.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.