2010 Mazda Mazda6
Ein bestimmtes Fahrzeug prüfen
Diese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsselnDiese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsseln9 Rückrufe und 225 Halterbeschwerden für dieses Modelljahr erfasst.
Fast alles hiervon beschreibt das Modelljahr, nicht das einzelne Fahrzeug. Nichts davon sagt etwas über Laufleistung, Unfälle oder Eigentum dieses Autos — keine Kennung kodiert das.
TL* THE CONTACT OWNED A 2010 MAZDA 6. WHILE MAKING A TURN, THE VEHICLE WAS T-BONED BY ANOTHER VEHICLE ON THE PASSENGER SIDE. THE AIR BAGS DEPLOYED AFTER THE CRASH OCCURRED. A POLICE REPORT WAS FILED. THE CONTACT SUSTAINED INJURIES TO THE NECK AND NOSE, WHICH REQUIRED MEDICAL ATTENTION. THE VEHICLE WAS DESTROYED AND TOWED TO A TOWING FACILITY. THE FAILURE MILEAGE AND VIN WERE UNKNOWN.
MY SON TOOK MY CAR TO SCHOOL. HE WAS GOING TO LEAVE AFTER SCHOOL LET OUT, HE WAS GOING TO GIVE HIS FRIEND A RIDE HOME. THIS IS A 6 SPEED CAR. HIS FRIEND GOT IN THE CAR ON THE PASSENGER SIDE, MY SON WAS TALKING TO HIS BROTHER, HE WAS NOT IN THE CAR. MY SON HAD PUT THE KEYS ON THE DRIVER SEAT, HIS FRIEND PUT THE KEY IN THE IGNITION AND TURNED THE KEY TO ACCESSORIES TO LISTEN TO THE RADIO, THE CAR HAD THE EMERGENCY BRAKE ON, AND IT WAS IN FIRST GEAR. WHEN HE TURNED THE KEY TO LISTEN TO THE RADIO THE CAR TOOK OFF!!!! I AM NOT SURE HOW FAST IT WAS GOING BUT IT CRASHED INTO A TREE AND STOPPED. THERE WAS NO DRIVER!! THERE IS A POLICE REPORT ON THIS, AND THERE WERE SEVERAL WITNESSES. MY SON'S FRIEND HIT HIS HEAD ON THE WINDSHIELD AND IT CRACKED THE WINDSHIELD. I CONTACTED MAZDA HEADQUARTERS TO MAKE THEM AWARE, AND THEY SEEMED BOTHERED THAT I EVEN CALLED!!!!! IT IS A MIRACLE A KID WAS NOT WALKING BY AND WAS STRUCK BY THIS OUT OF CONTROL CAR. *TR
TL* THE CONTACT OWNS A 2010 MAZDA 6. AFTER BEING STOPPED BY A POLICE OFFICER, THE CONTACT WAS INFORMED THAT THE RED REFLECTOR LENS IN THE TAIL LAMPS WERE MISSING. UPON INSPECTING THE VEHICLE, THE CONTACT BECAME AWARE THAT THE TAIL LIGHT BULBS WERE EXTREMELY HOT, WHICH CAUSED THE REFLECTORS TO SEPARATE FROM THE TAIL LIGHT HOUSINGS. THE DEALER (MAZDA OF JACKSON, 5397 INTERSTATE 55 NORTH FRONTAGE RD, JACKSON, MS 39206, (601) 991-2222) WAS NOTIFIED OF THE FAILURE, BUT THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS ALSO NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 160,000.
I WAS DRIVING ON THE FREEWAY AFTER LEAVING CLASS. AFTER BEING ON THE FREEWAY FOR ABOUT 5 MINUTES, THE CAR STARTS TO POWER DOWN. ALL OF THE CAUTION LIGHTS START TO COME ON (IE: BATTERY LIGHT, TRACTION LIGHT, OIL LIGHT AND MANY OTHERS). AS I GET OFF THE FREEWAY, THE CAR STARTS TO LOSE MORE POWER, THE FUEL ACCELERATION DID NOT WORK AS WELL AND THE STEERING BECAME VERY HARD BECAUSE SOMETHING HAPPENED TO THE POWER STEERING FLUID. THEN AS I START TO PULL INTO A PARKING LOT THERE IS SMOKE COMING FROM BOTH SIDES OF THE CLOSED HOOD. I PUT THE CAR IN PARK, TURN OFF THE ACCELERATION, AND POP THE HOOD AND I NOTICED IT IS ON FIRE. I RAN FROM CAR AND CALLED THE FIRE DEPARTMENT. AFTER ALL IS SAID AND DONE, THE CAR IS TOTALED. I AM NOT SURE WHAT COMPONENTS MALFUNCTIONED IN THE CAR WHICH INSURANCE IS DETERMINING AT THE MOMENT. THIS IS A MAZDA DEFECT!!!!!
The contact owns a 2010 Mazda Mazda6 . The contact stated while driving approximately 25 mph and drove over a bump and lost control of the vehicle and crashed into another vehicle. The contact stated the disc off warning light was illuminated. The contact stated no one was injured nor sought medical attention. A police report was not filed. The vehicle was not drivable. The contact was towed to her residence and then to a local dealer, where it was diagnosed with the rear structure was corroded and needed to be replaced. The vehicle was not repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 180,000. The contact stated that the dealership deemed the vehicle unsafe to bring to the shop and therefore did not perform the necessary repairs in the recall. The dealer notified the contact about that as well as the manufacturer. The contact must arrange a way to tow the vehicle off of their lot.
PASSENGER SIDE DASH STARTED MELTING ABOUT A YEAR AGO AND HAS GOTTEN SO BAD THE DASH IS ALMOST LIQUID. SUNLIGHT REFLECTS OFF THE SHINY MELTED DASH AND BLINDS THE DRIVER. I WAS IN AN ACCIDENT BECAUSE I COULDN'T SEE DUE TO LIGHT REFLECTING OFF MELTED DASH. DASH IS SO STICKY THAT YOU CANNOT TOUCH OR IT WILL STICK TO HANDS/ CLOTHING. I HAVE RUINED MULTIPLE ITEMS OF CLOTHING DUE TO THIS MESS.
TL* THE CONTACT OWNS A 2010 MAZDA 6. THE CONTACT STATED THAT THE VEHICLE WAS INVOLVED IN A FRONT END COLLISION. THE AIR BAGS DID NOT DEPLOY. THERE WERE NO INJURIES AND A POLICE REPORT WAS FILED. THE VEHICLE WAS TOWED TO CLYDE LYNN COLLISION CENTER; HOWEVER, IT HAD NOT YET BEEN DETERMINED IF IT WAS DESTROYED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE VEHICLE WAS INCLUDED IN NHTSA CAMPAIGN NUMBER: 16V594000 (AIR BAGS) AS A POSSIBLE CAUSE OF THE FAILURE. THE PARTS WERE NOT AVAILABLE FOR THE REPAIR. THE FAILURE MILEAGE WAS NOT PROVIDED.
I recently had my front subframe replaced as part of your recall, however, the rear subframe and all components attached are suffering from the exact same rust and potential component failure as the front. I was replacing my brakes today and noticed that the entire structure is on the verge of complete failure. The right rear suspension already makes unusual noises when going over even small bumps and I imagine if I were to hit a large pothole that would probably be the end of this car. I imagine all similar Mazda 6s in the Midwest suffer from the exact same degradation and it is a major safety concern. There are places where there's chunks of subframe missing because it has rusted completely through and just disintegrated.
I looked up recalls on my vehicle and it states that The 2011 Mazda6 is part of a recall (NHTSA 19V-323, Mazda 2818I) covering 2011-2013 models for front cross member (subframe) corrosion due to insufficient rust protection . In salt-belt states, this corrosion can cause the lower control arm to detach, reducing steering control and increasing crash risk. Key Details regarding the 2011 Mazda6 Subframe Recall: Scope: The recall affects specific 2011-2013 Mazda6 vehicles (and 2009-2010 models in a previous, related recall). Location Restrictions: Vehicles must have been originally sold in, or currently/previously registered in, 23 "salt belt" states (including CT, NY, MI, MN, OH, etc.). The Issue: The front cross member may experience severe corrosion, causing structural failure of the passenger-side lower control arm mounting point. Symptoms: Drivers may notice a change in steering alignment or a broken cross member. Remedy: Dealers will inspect the cross member and replace it if necessary. Action Required: Owners should contact their local Mazda dealership to check their VIN for open recalls. The recall was officially announced in May 2019 and is an expansion of a 2018 action.
The contact owns a 2010 Mazda Mazda6. The contact stated that while driving at an undisclosed speed, the vehicle inadvertently veered to the left. There was no warning light illuminated. The contact stated that the vehicle became difficult to steer. The vehicle was taken to an independent mechanic where it was diagnosed and determined that the engine cradle had failed and was severely rusted and needed to be replaced. The vehicle was not repaired. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 114,000.
The airbag light is still flashing on the dashboard after the airbag recall on this vehicle was fixed. It may be related to a different recall, which is safety campaign #16V594000.
Extensive rust and corrosion in rear subframe. So severe the vehicle is unsafe to drive.
2010 mazda 6 i series sedan the entire rear subframe/cradle is rotted along with all the other parts connected to it, the A arm, bumper stops, control arms, rear sway bar the entire rear under carriage. took it to the shop and they said there have been several complaints about this exact issue on several of these cars from 09-13 models. the parts was not painted correctly like the front that was recalled. exposed to all weather elements, the shop wants almost 4k for labor only to fix but the main problem is finding the rear subframe on these cars is almost impossible next to cost a fortune. now i have a yard ornament. junk yard wants to give me 170 bucks for the car but im not doing that. Mazda needs to fix this issue. i would of never know it was rotted out unless i took it to the shop for rear swaying and sagging. its all over the road. very dangerous and will cause a wreck almost certainly. please someone do something about this issue. dont have the money to fix this let alone buy another car.
The rear subframe is compromised; it separated from the body of the car. The vehicle is in my driveway and available for inspection should the need arise. The rear end had felt a bit shaky for a month so I took it to my mechanic, who declared the vehicle "unfit for the road" due to the fact that the subframe was rotted away and detached from the car itself. I was told one big bump is an accident waiting to happen...pieces of the car would go flying and I could be left with zero mobility to evade oncoming traffic. The possibility of projectiles injuring anyone around the car was enough for me to park it. The car has not been inspected by Mazda, the police, or insurance because there was no accident. Since it's not safe to drive, I took the word of my independent mechanic rather than driving it to a dealership. There were no warnings other than a bit of a sway in the rear end, which I originally attributed to its age. I've researched the issue and it seems to be a result of subpar quality with regard to the metal that was used in manufacturing.
The contact owns a 2010 Mazda Mazda6. The contact stated while driving 40–45 MPH, there was an abnormal sound coming from the vehicle. The TPMS warning light was illuminated. The vehicle was taken to an independent mechanic, who informed the contact that the rear main sub frame was completely rusted. There was a crack detected in the middle of the sub frame. The vehicle was taken to the local dealer, where it was diagnosed that the rear sub frame was rusted and needed to be replaced. The vehicle was not repaired. The manufacturer informed the contact that it was normal wear and tear, but no assistance was provided. The failure mileage was approximately 130,000.
Von Haltern dieses Modelljahrs eingereicht und von der NHTSA nicht geprüft — die Schilderung einer Person, keine feststehende Tatsache.
4 Rückrufe enthalten eine Fahrverbots- oder Abstellwarnung. Prüfen Sie, ob dieses Fahrzeug bereits instand gesetzt wurde, bevor Sie es fahren oder abstellen.
Mazda North American Operations (Mazda) is recalling certain 2007-2012 CX-7, CX-9, and 2009-2012 Maza6 vehicles. These vehicles had their passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Abhilfe: Owners are advised not to drive their vehicles until the repair has been performed. Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. The recall began December 3, 2019. Owners may contact Mazda customer service at 1-800-222-5500, option 4. Mazda's number for this recall is 1317F. Note: This recall supersedes recalls 16V356 and 17V012.
Mazda North American Operations (Mazda) is recalling certain 2014-2015 Mazda CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2011-2013 Mazda6, 2011-2012 CX-7, and 2011-2015 CX-9 sold, or ever registered in the states of Arizona, Arkansas, Delaware, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, West Virginia and the District of Columbia, or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2010-2013 Mazda6, 2010-2012 CX-7, and 2010-2015 CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Abhilfe: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began November 9, 2018. Owners may contact Mazda customer service at 1-800-222-5500, Option 4. Mazda's number for this recall is 1317F.
Mazda North American Operations (Mazda) is recalling certain 2009-2010 Mazda Mazda6 vehicles sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. The front cross member may corrode after exposure to road salt.
Abhilfe: Mazda will notify owners, and dealers will inspect the cross member and either install a side member and drain hose and apply wax to protect from rust, or install a drain hose and an improved front cross member, free of charge. The recall began March 18, 2019. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 2818I.
Mazda North American Operations (Mazda) is recalling certain 2013 Mazda6 and CX-9 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, unless covered in "Zone A," Mazda is recalling certain 2010 Mazda6, CX-7 and CX-9 vehicles sold, or ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Additionally, unless covered in Zone A or Zone B, Mazda is recalling certain 2009 Mazda6, CX-7, and CX-9 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Abhilfe: Mazda will notify owners, and dealers will replace the front passenger air bag inflator with an alternate inflator, free of charge. The recall began March 2, 2018. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F.
Mazda North America Operations (Mazda) is recalling certain 2009-2011 Mazda6, and 2007-2011 CX-7 and CX-9 vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Abhilfe: Owners are advised not to drive their vehicles until the remedy is performed. Mazda will notify owners, and dealers will replace the passenger frontal air bag inflator with an alternate inflator, free of charge. The recall began on August 30, 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 1317F. Note: This recall supersedes recall 16V356 and all vehicles that were not remedied under that campaign are now covered by this one.
Mazda North American Operations (Mazda) is recalling certain model year 2009-2010 Mazda6 vehicles manufactured February 4, 2008, to December 3, 2009. The protective coating may not have been properly applied to the air bag control unit (ACU) and, as a result, moisture may damage the unit causing it to malfunction.
Abhilfe: Mazda dealers will replace the ACU, free of charge, however parts are not currently available. The recall began June 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9816H.
Mazda North America Operations (Mazda) is recalling certain model year 2010-2012 Mazda6 vehicles manufactured September 14, 2009, through May 2, 2011, and equipped with 2.5L engine. In the affected vehicles, spiders may weave a web in the evaporative canister vent hose, blocking it and causing the fuel tank to have an excessive amount of negative pressure.
Abhilfe: Mazda will notify owners, and dealers will reprogram the powertrain control module and inspect and clean the canister vent line. If a web was found in the line, the fuel tank and check valve on canister vent line will be replaced. These repairs will be done free of charge. The recall began on April 30, 2014. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number associated with this campaign is 7214C.
Mazda is recalling certain model year 2009-2013 Mazda6 vehicles manufactured February 4, 2008, through August 24, 2012. The door latch mounting screws may become loose.
Abhilfe: Mazda will notify owners, and dealers will apply a thread locking adhesive to the door screws and retorque them, free of charge. The recall began on October 29, 2013. Owners may contact Mazda at 1-800-222-5500. Mazda's recall number is 7013I.
MAZDA IS RECALLING CERTAIN MODEL YEAR 2009-2010 MAZDA6 VEHICLES MANUFACTURED FROM APRIL 8, 2008, THROUGH FEBRUARY 8, 2010. A CERTAIN TYPE OF SPIDER MAY WEAVE A WEB IN THE EVAPORATIVE CANISTER VENT LINE AND THIS MAY CAUSE A RESTRICTION IN THE LINE. IF THIS OCCURS, THE FUEL TANK PRESSURE MAY BECOME EXCESSIVELY NEGATIVE WHEN THE EMISSION CONTROL SYSTEM WORKS TO PURGE THE VAPORS FROM THE CANISTER.
Abhilfe: DEALERS WILL INSPECT AND CLEAN UP THE CANISTER VENT LINE, AND INSTALL A SPRING TO PREVENT THIS TYPE OF SPIDER FROM ENTERING THE VENT LINE. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE MARCH 25, 2011. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500.
Nach Modelljahr veröffentlicht, nicht nach FIN — betrifft dieses Fahrzeug möglicherweise nicht oder wurde bereits erledigt. Beim Händler bestätigen.