3 Rückrufe und 4 Halterbeschwerden für dieses Modelljahr erfasst.
Diese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsselnFast alles hiervon beschreibt das Modelljahr, nicht das einzelne Fahrzeug. Nichts davon sagt etwas über Laufleistung, Unfälle oder Eigentum dieses Autos — keine Kennung kodiert das.
TL* THE CONTACT OWNS A 2001 BMW M5. WHILE PARKED, THE FRONT DRIVER AND PASSENGER SIDE AIR BAGS DEPLOYED INADVERTENTLY. THE CONTACT REFERENCED NHTSA CAMPAIGN ID NUMBER: 03V421000 (AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE) BUT WAS ADVISED BY THE MANUFACTURER THAT THE VIN WAS NOT INCLUDED IN THE RECALL. THE VIN WAS NOT AVAILABLE. THE VEHICLE WAS NOT REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 108,000.
TL* THE CONTACT OWNS A 2001 BMW M5. THE CONTACT STATED THAT THE AIR BAG WARNING LIGHT WOULD ILLUMINATE ON THE INSTRUMENT PANEL. THE MANUFACTURER ADVISED THE CONTACT THAT THE VEHICLE WAS NOT INCLUDED IN NHTSA CAMPAIGN ID NUMBER: 03V421000 (AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE). THE VEHICLE WAS NOT REPAIRED. THE FAILURE MILEAGE WAS 59,000 AND THE CURRENT MILEAGE WAS 66,800.
HI, I PURCHASED A PAIR OF MICHELIN PS2 HIGH PERFORMANCE TIRES FOR $600 FROM TIRERACK.COM AND NOTICED THAT THE LATERAL TREAD / GROVES ARE BLOCKED WITH EXCESS RUBBER THROUGHOUT BOTH TIRES. THEY WERE INSTALLED ON 12/06/2008. I RECEIVED DOCUMENTATION FROM ANOTHER TIRE MANUFACTURER THAT STATES THE LATERAL GROVES PLAY AN IMPORTANT FUNCTION TO DISPERSE WATER TO MINIMIZE HYDROPLANING. CURRENTLY, TIRERACK DENIES MY CLAIM FOR AN EXCHANGE. I CONTACTED MICHELIN AND THEY REFERRED ME BACK TO TIRERACK. HTTP://WWW.YOKOHAMATIRE.COM/CUSTOMER_SERVICE/CONSTRUCTION_TREAD.ASPX THE BLOCKAGE IS DIFFICULT TO REMOVE AND WOULD REQUIRE ME TO USE A SHARP UTILITY KNIFE TO MY TIRES. I AM NOT SURE WHAT MICHELIN WOULD SAY IF THEY KNEW I TOOK A KNIFE TO MY TIRES. TIRERACK SO FAR HAS DENIED MY REQUEST FOR AN EXCHANGE CLAIMING THE PROBLEM IS COSMETIC AND WOULD GO AWAY. I DIFFER BECAUSE THE PROBLEM BLOCKS A FUNCTIONAL SAFETY AND PERFORMANCE AREA OF THE TIRE AND PREVENTS ITS ABILITY TO DISPERSE WATER. TIRERACK'S WRITTEN WARRANTY POLICY STATES THAT THEY WOULD WORK WITH ME AND THE MANUFACTURER TO RESOLVE A CLAIM. THIS HAS NOT HAPPENED ACCORDING TO MY KNOWLEDGE. I HAVE EVEN SUBMITTED A VIDEO AND PICTURES. I AM SUBMITTING THIS COMPLAINT BECAUSE AS A CONSUMER WHO PAID A PREMIUM FOR THE MOST EXPENSIVE AND HIGHEST PERFORMANCE TIRES AVAILABLE, I WOULD LIKE TO HAVE THE PIECE OF MIND THAT THEY WILL NOT FAIL... AND WHEN IT COMES TO SAFETY, A CONSUMER SHOULD NOT HAVE TO CONTEMPLATE IF, WHEN OR THE LIKELIHOOD AN ACCIDENT WOULD OCCUR - EVEN IF ONE PERCEIVES THE LIKELIHOOD TO BE LOW. I'D RATHER NOT TAKE THAT CHANCE AND IT ONLY TAKES ONE EVENT TO CHANGE SOMEONE(S) LIFE FOREVER. I THEREFORE FEEL THAT TIRERACK HAS DELAYED THIS ISSUE FOR OVER A MONTH AND HAS NO REGARD FOR MY SAFETY OR THE SAFETY OF PEDESTRIANS ON THE ROAD BY MAKING A SWIFT EXCHANGE. TIRERACK HAS SO FAR ONLY SHOWN SIGNS OF ONLY WANTING TO MAKE MONEY IRREGARDLESS OF SAFETY. PLEASE FOLLOW UP ON MY CONCERNS. *TR
WHILE DRIVING AT VERY LOW SPEED SIDE AIR BAGS DEPLOYED. *AK
Von Haltern dieses Modelljahrs eingereicht und von der NHTSA nicht geprüft — die Schilderung einer Person, keine feststehende Tatsache.
The cockpit cable harness may be damaged when the microfilter is replaced. This can lead to a short circuit, with smoke build-up resulting in fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to manufacturing problem, the rotation bushing of the steering column's double universal joint can break when the steering wheel is turned hard at the extreme position and when steering without steering assistance with the engine switched off. This can lead to unexpected steering behaviour which can increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abgeglichen über Marke und Modellname — Safety Gate veröffentlicht keine FIN. Prüfen Sie die Produktionsdaten und nennen Sie dem Händler den Rückrufcode.
1 Rückruf enthält eine Fahrverbots- oder Abstellwarnung. Prüfen Sie, ob dieses Fahrzeug bereits instand gesetzt wurde, bevor Sie es fahren oder abstellen.
BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Abhilfe: Owners are advised not to drive their vehicles until the vehicle has been remedied. BMW will notify owners, and dealers will inspect the driver side air bag module, replacing it as necessary, free of charge. The recall began March 15, 2017. Owners may contact BMW customer service at 1-800-525-7417.
ON CERTAIN PASSENGER VEHICLES, A MICROPROCESSOR IN THE AIR BAG CONTROL MODULE, WHICH ACTIVATES THE FRONT AIR BAGS, THE SIDE AIR BAGS, THE FRONT SEAT SAFETY BELT PRETENSIONERS, AND THE BATTERY SAFETY TERMINAL, MAY HAVE A MALFUNCTION THAT COULD LEAD TO AN UNINTENDED ACTIVATION OF ONE OR MORE OF THESE COMPONENTS.
Abhilfe: DEALERS WILL REPLACE THE AIR BAG CONTROL MODULE. OWNER NOTIFICATION BEGAN NOVEMBER10, 2003. OWNERS SHOULD CONTACT BMW AT 1-800-831-1117.
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 18-INCH TIRES. (18-INCH TIRES ARE STANDARD EQUIPMENT ON THE M5 AND OPTIONAL EQUIPMENT ON THE 7-SERIES MODELS). THE MACHINE USED TO MOUNT AND INFLATE THE TIRES ON THE WHEELS AT THE ASSEMBLY PLANT MAY HAVE DAMAGED THE SIDEWALL OF ONE OR MORE TIRES. THE DAMAGED AREA COULD WEAKEN TO THE POINT WHERE A SUDDEN LOSS OF AIR FROM THE TIRE COULD OCCUR.
Abhilfe: DEALERS WILL INSPECT THE TIRES AND IF DAMAGE FROM THE MOUNTING MACHINE IS FOUND, THE TIRE WILL BE REPLACED. OWNER NOTIFICATION BEGAN MARCH 10, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
Nach Modelljahr veröffentlicht, nicht nach FIN — betrifft dieses Fahrzeug möglicherweise nicht oder wurde bereits erledigt. Beim Händler bestätigen.