2015 Land Rover Discovery Sport
Other Land Rover models
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINThis page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN2 recalls and 0 owner complaints on record for this model year.
Almost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
Jaguar Land Rover North America, LCC (Land Rover) is recalling certain model year 2015 Discovery Sport manufactured September 17, 2014 through November 3, 2014 and 2014-2015 Range Rover Evoque vehicles manufactured July 15, 2013 through July 1, 2015. In the affected vehicles the transmission sensor clusters may have insufficient crimps in the transmission wire harness, and as a result, the transmission may unexpectedly shift to neutral.
Remedy: Land Rover will notify owners, and dealers will inspect the automatic transmission serial number and if required, will update the transmission software to prevent the transmission from shifting into neutral due to a faulty crimp, free of charge. The recall is expected to began October 14, 2016. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is P091.
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain model year 2015-2016 Land Rover Discovery Sport vehicles manufactured September 17, 2014, to March 5, 2016. In the affected vehicles, the license plate illumination lamp may fall out. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Remedy: Land Rover will notify owners, and dealers will replace both rear license plate lamp housings, free of charge. The recall began on June 21, 2016. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is P077.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Corrosion of the airbag connector may increase electrical resistance, which could prevent the driver airbag from deploying correctly in the event of an accident. This increases the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver and front passenger airbags may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The idler pulley on the front-end accessory drive (FEAD) belt may over-rotate due to high torsional stress and collide with the oil temperature and pressure sensor. This could damage the sensor and cause an oil leak, creating a slipping hazard for other road users, particularly two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective module has been installed in the high-voltage battery, which may cause it to overheat and lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Corrosion in the locking system of the rear doors can cause them to unlock unintentionally, without an indication on the instrument panel, increasing the risk of an accident, injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic used for the oil filter housing in some petrol and diesel engines can crack over time. This can cause oil leaks onto the engine and road. Leaked oil can ignite upon contact with hot engine parts, increasing the risk of a fire. Moreover, it can also create slippery sections, increasing the risk of accidents and injuries especially for two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
An oil leak from the turbocharger oil feed pipe could create a slippery section on the road, creating a risk of accident for motorcycles and other two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The lower A-pillar bolt on the right may not have been fastened to the body with the correct torque. In the case of plug-in hybrid vehicles (PHEVs) with 7 seats, it is possible that the body structure may not perform as intended in certain crash modes. In the event of an accident, there is an increased risk of injury to occupants of the vehicle. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.