2016 BMW X6
1 recall and 9 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN1 recall and 9 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC. (BMW) is recalling certain 2015-2019 X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles equipped with rear seat lower anchor bars used in securing child restraint seats. The lower anchor bars may become damaged over time when used with an ISOFIX-type, rigid-style connector, child restraint system.
Remedy: BMW will notify owners, and dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body, free of charge. Owner notification began January 17, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
ON MANY BMW CARS YOU WILL SEE REPORTS OF THE AIR SUSPENSION FAILING. MINE FAILED DAYS AFTER THE WARRANTY EXPIRED BUT WITH LESS MILES THAN IN THE WARRANTY. STILL A LOW 4 FIGURE COST TO THE CONSUMER TO FIX. THIS SHOULD FIXED VIA A RECALL AND CONSUMERS REIMBURSED FOR COSTS ASSOCIATED. THIS PROBLEM IS EXPERIENCED BY THOUSANDS OF BMW OWNERS. IT CAUSES A LESS THAN SAFE OPERATION OF VEHICLE OR AN INOPERABLE VEHICLE. MY HEAD AND NECK WERE INJURED WHILE GOING 20MPH
The contact owns a 2016 BMW X6. The contact stated that upon starting the vehicle, the steering wheel failed to function as intended. The vehicle was parked inside the garage, and the contact was unable to turn to the right or the left. The message "Power Steering Lock" was displayed on the instrument panel. The contact stated that a mobile mechanic inspected the vehicle and used a personal OBD scanner to retrieve a fault code for the electronic power steering (EPS) not communicating as needed. The vehicle was not repaired. The contact associated the failure with NHTSA Campaign Number: 16V704000 (STEERING). However, the VIN was not included. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline. The failure mileage was approximately 52,000.
I am reaching out regarding a serious issue with my 2016 BMW X6 M, which suffered a driveshaft failure. I understand that certain BMW models were recalled for similar issues, but my vehicle was not included. Given the severity of the damage and the number of similar complaints online, I believe this issue warrants further review. Recently, while driving on the freeway, my vehicle experienced a sudden failure, requiring it to be towed to a repair shop. There were no warnings or indications that anything was wrong. Upon inspection, the mechanics determined that the driveshaft had come loose, causing extensive damage to the undercarriage and transmission. Due to the severity of the issue, which literally renders my car as a complete loss due to a repair bill over $35,000. I am reaching out to you for assistance. I also contacted BMW's customer relations line which followed a standard script indicating that there were no recalls and no acceptance of any responsibility.
The contact owns a 2016 BMW X6. The contact stated that the vehicle was running rough, with the check engine warning light illuminated. The contact used a vehicle scanner and retrieved diagnostic trouble codes indicating a misfire in cylinder number #5, and the water pump had failed due to a ground short circuit failure. The contact replaced the spark plugs and recharged the battery, and the check engine warning light was reset; however, the vehicle scanner continued to retrieve diagnostic trouble codes indicating the water pump failure due to the short circuit of the electrical ground. The dealer was not notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 130,000.
The contact owns a 2016 BMW X6. The contact stated while driving 35 MPH, there was an abnormal sound coming from the front of the vehicle. The contact pulled off the road. There was no warning light illuminated. The vehicle was towed to local mechanic who informed the contact that the driveshaft had detached from the vehicle. The vehicle was not repaired. The contact referenced NHTSA Campaign Number: 17V138000 (Power Train) as a possible solution however, the VIN was not included in the recall. The manufacturer was notified of the failure. The failure mileage was 150,000.
The contact owns a 2016 BMW X6. The contact stated while driving at an undisclosed speed, the contact attempted to use the turn signal while making a right turn however, the system failed to operate as needed. The vehicle was taken to the dealer where it was diagnosed that the Instrument panel failed and needed to be replaced. The vehicle was repaired; however, the failure recurred. The contact stated that the instrument panel intermittently illuminated. The vehicle was taken back to the dealer where it was diagnosed but the failure could not be duplicated. The contact was concerned that the instrument panel could fail to display safety warnings. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was advised to contact the dealer. No further assistance was provided. The failure mileage was approximately 34,000. The consumer stated after replacing the instrument cluster, the dash dims and brightens for no reason. And dims when no sunlight is shining on the vehicle.
I was driving down the street and the drive shaft broke and when that broke it hit my exhaust and broke my transmission cooler
'TAKATA RECALL' I WAS DRIVING MY 2016 BMW X6 XDRIVE 50I ON HIGHWAY ALL OF A SUDDEN, I HEARD A HITTING SOUND UNDER THE CAR. I PULLED OVER TO THE SHOULDER AND I REALIZED FRONT DRIVESHAFT HAD BROKEN OFF. FORTUNATELY, TRAFFIC WAS HEAVY AND MOVING SLOW THIS ALLOWED ME TO PULL OVER SAFELY.
STEERING TURN ALL THE WAY TO LEFT SHAKES AS WELL.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.