2016 BMW X4
2 recalls and 10 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN2 recalls and 10 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Remedy: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2011-2017, X3 sDrive28i, X3 xDrive28i and X3 xDrive35i, vehicles manufactured July 2, 2010 to April 14, 2016, 2015-2017 X3 xDrive28d vehicles manufactured March 10, 2014 to March 31, 2016, and 2015-2017 x4 xDrive28i, X4 xDrive35i and X4 xDriveM40i vehicles manufactured March3, 2014 to April 15, 2016. The affected vehicles have lower anchor bars for securing child restraint seats that may become damaged when using the European-ISOFIX-type, rigid-style connector, child restraint system.
Remedy: BMW will notify owners, and dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body, free of charge. The recall began on July 13, 2016. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicle was involved in a collision with right/ passenger front and side of vehicle. whole bumper knocked off. left front tire broke off during collision. Passenger side curtain air bag deployed. Stirring air bag did not deploy nor did the curtain airbag on driver side. Passenger injured with broken nose and face injury during collision.
The contact owns a 2016 BMW X4. The contact was notified of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2016 BMW X4. The contact stated while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated that the engine temperature warning light was illuminated. The engine overheated, and the vehicle lost motive power. The contact stated that the vehicle was stuck in the middle of the street. The vehicle was restarted; however, the vehicle failed to start as intended. The vehicle was towed to the residence. The vehicle was later towed to the warranty company; however, the contact was informed that the failure was an electrical failure. The contact was advised to take the vehicle to the dealer. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 69,777.
The contact owns a 2016 BMW X4. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
My daughter [XXX] had an oil change on 2-23-2024, and was told that fluid was leaking. In less than 2 weeks, the leakage had worsen. All the electrical components were flashing and the vehicle was cutting on and off. Eventually it stopped running. Her fiance, [XXX] , had the vehicle towed to an auto repair shop that specializes in European cars on 3-25-2024. She was quoted for a new engine, cost $12,500, which was about the same as what was owed. Since we couldn't afford the cost of a new engine, we did a voluntary surrender to the finance company, Foursight Capital. They sent us a notification for an Explanation of Calculation of Surplus or Deficiency. Had we been informed about the recall from the NHTSA failure to adequately remedied for a defective vehicle within a reasonable time, just maybe this problem would have not occurred. Now I'm stuck with a bill and no longer have the vehicle. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2016 BMW X4. The contact stated that while driving at various speeds, an abnormal popping noise was coming from vehicle while driving over a speed bump or while turning the steering wheel in either direction. The contact stated that no warning lights were illuminated. The vehicle was taken to an independent mechanic where a diagnostic test was performed; the diagnostic test showed that the control arm was defective. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 89,000.
After starting vehicle and putting it into drive, I received a Parking Brake Malfunction error message. The electronic parking brake was engaged and it could not be release allowing the vehicle to move. I attempted to reset the electronic parking brake following the dealerships recommendations. 1) remove and replace the fuses for the parking system (3 fuses) and 2) disconnecting the battery for 30 minutes and re-connecting the battery in order to reset the computer. Neither of these methods worked, and there is no way to manually release the parking brake. Ultimately, the vehicle was towed to the local BMW dealership for service. They have not been able to diagnose or fix the issue. thankfully, the malfunction happened while pulling out of the garage, and not at speed on the interstate. That could have been disastrous. This appears to be a serious engineering flaw in BMW vehicles equipped with electronic parking brake systems.
Vehicle has stalled while in operation (at speed) 5 times since owning. All were very dangerous situations for my wife and surrounding drivers. All issues were apparently "fuel system" related. I purchased this vehicle on May 11, 2018 (POC) from Fields BMW South Orlando, FL. The car was most recently brought in for repair for a continued issue on May 3, 2021. Vehicle has never been in a wreck and has roughly 73K miles. •5/31/2018 – Issue with fuel system. Car started shaking and would not start. 2 weeks after purchase. •6/05/2018 – Issue with fuel system. Vehicle stalls while in operation. •8/21/2018 – Vehicle is losing acceleration while driving. Drive train malfunction light comes on. •3/5/2019 – Check engine light on. Faulty tank ventilation pressure switch. •6/23/2020 – Car stalls while driving (35 mph+) and strands me in the middle of an intersection. Car will not switch out of park. Police had to come to move the vehicle. Very dangerous situation. Wife is driving, 3 months pregnant at this time. •8/15/2020 – Car stalls while driving. Again, driving around 30+ mph. Wife had to quickly pull the car to the median. Dangerous situation. Car will not switch out of park. Wife is driving, 5 months pregnant. •5/3/2021 – Car stalls while driving. Luckily able to coast into a gas station under no power. Car will not switch out of park. Wife stranded with no AC with 3-month-old baby and 9 yr. old daughter. - 5/17/2021 - Transfer Case Needs Replacement Besides the fuel system issues, I believe there is a dangerous feature with this vehicle in that it cannot be switched out of park when it loses power. Being stuck in the middle of an intersection and unable to move a car into neutral (even with police officer) is extremely dangerous. Vehicle was inspected by a BMW TSE for transfer case issue. They say it needs to be replaced. This vehicle is a danger and should not be on the road.
TL* THE CONTACT OWNS A 2016 BMW X4. THE CONTACT STATED WHILE DRIVING 30 MPH, THE VEHICLE LOSS MOTIVE POWER. THE VEHICLE DROVE OVER A CURB CAUSING DAMAGE TO THE SUSPENSION. THE CONTACT HAD THE VEHICLE TOWED TO A REPAIR SHOP WHERE AN INDEPENDENT MECHANIC INSPECTED THE VEHICLE AND STATED THAT THE CAUSE OF THE FAILURE WAS A FAULTY TIMING CHAIN. THE SUSPENSION DAMAGE WAS REPAIRED HOWEVER, THE ENGINE WAS NOT REPAIRED. BMW OF OWINGS MILLS (9702 REISTERSTOWN RD, OWINGS MILLS, MD 21117, (410) 902-8700) WAS CONTACTED AND PROVIDED AN ESTIMATE FOR THE ENGINE REPAIR/REPLACEMENT. THE VEHICLE WAS NOT YET REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 90,000.
VEHICLE WAS SET WITH INCORRECT REAR CAMBER/ALIGNMENT/TOE-IN LEADING TO VERY PREMATURE INSIDE EDGE REAR TIRE WEAR WITH BOTH REAR TIRES. THIS CREATES UNSAFE HANDLING CONDITIONS, PREMATURE TIRE WEAR, AND A SAFETY CONCERNS WHEN TIRES FAIL.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.