1 richiamo e 62 segnalazioni di proprietari registrati per questo anno modello.
Questa pagina descrive il modello. Per sapere come è equipaggiata una singola auto e se il suo identificativo è valido, decodifica il VIN.
Decodifica un VINQuasi tutto questo riguarda l’anno modello, non la singola auto. Nulla qui può dirti chilometraggio, incidenti o proprietà di questo veicolo: nessun identificativo li codifica.
While taking off in my 2020 Toyota C-HR on the highway, the CVT transmission suddenly failed, resulting in an immediate and significant loss of propulsion power. The vehicle did not fully shut off but lost the ability to maintain normal highway speed, requiring me to rapidly reduce speed and carefully maneuver the vehicle to safety in active traffic conditions. This created a serious safety risk due to unexpected loss of acceleration and potential inability to maintain highway speed in traffic. The failure occurred at approximately 117,700 miles and shortly after purchase. The vehicle had a documented history of regular maintenance performed at Toyota dealerships approximately every 3,000 miles. I was later informed by Toyota service personnel that the vehicle had previously been documented on 2/2/26 in the manufacturer’s internal system with a CVT fault and a recommendation for transmission replacement prior to my purchase, which was not disclosed in any public vehicle history reporting system. This raises a major safety concern that the transmission failure may be part of a broader pattern of CVT reliability issues affecting this model and drivetrain family. I am submitting this complaint due to the sudden loss of propulsion at highway speed, which presents a potential safety hazard to drivers and surrounding traffic. And deceptive practices of undisclosed known safety issues by Toyota of USA.
WAS TURNING A CORNER AND MY CAR LOST CONTROL AND MESSED UP THE FRONT END
CVT failing, causing extreme bearing noise. Toyota insisted lifetime fluids with no transmission service or fluid changes. At 147000 miles it is noisy with no warning lights and no recommended service.
Transmission went out 3,400 miles past the 60k warranty. Vehicle taken in at 59k miles and told there were no issues. Filed good will warranty claim. Toyota needs to do a recall. This is a know problem. 2018 and 2019 models recalled. 2020 models same issue, why no recall for 2020. I have read at least 17% of 2020’s have already failed.
Transmission making winding noise, took into toyota told will need full transmission replacement. Said could just go out at anytime. 2020 with 75700 miles on car.
Transmission – Loss of Power / Jerking / Safety Hazard The vehicle is experiencing a serious issue with the K113 CVT transmission. The transmission produces abnormal noise and can jerk and lose power, creating a potentially hazardous condition, particularly when accelerating to overtake another vehicle or when merging onto a freeway. A sudden loss of power in these situations can significantly increase the risk of a collision. The vehicle has been properly maintained and driven normally. The transmission issue appears consistent with a known problem reported with this CVT/transmission design. I am concerned that the underlying manufacturing/design issue may cause premature transmission failure and create an unsafe driving condition. The vehicle currently has approximately 107,000 miles. Despite the issue, the vehicle may continue to operate and shift, making the problem difficult to identify until the transmission is under load or has been driven for some time. I am requesting that NHTSA investigate this transmission issue and determine whether a safety defect or manufacturing/design defect exists and whether additional action by the manufacturer is warranted.
CVT bearing disintegrating. Expected repair cost is $10k-$12k. Purchased about a year ago and still owe almost 20k on the loan. This is the car that was intended to be used by my daughter but cannot trust this to make the drive. There have been no warning lamps or system messages just a metal on metal grinding sound. This is a known issue with this model of vehicle and there is already a warranty enhancement for this issue on 2018 and 2019 models. Mine is a 2020 so they clearly did not fix this known issue. This started about a month ago as a slight high pitched whine and has quickly progressed to the point that we cannot use the vehicle.
The contact owns a 2020 Toyota C-HR. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the engine compartment. No warning lights were illuminated. The vehicle was taken to a dealer where it was diagnosed and determined that the transmission belt needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 81,321.
While driving, my 2020 Toyota C-HR suddenly lost acceleration in the middle of the road, with the vehicle failing to respond to throttle input. This has now happened twice. There was no warning noise (no whining or grinding) beforehand, and the loss of power occurred without warning while the vehicle was in motion, creating a dangerous driving condition due to inability to maintain speed or safely merge/clear traffic.
I have a K114 CVT internal bearing defect. It is available for inspection upon request. Transmission issues are unsafe because it can cause sudden loss of acceleration, unexpected vehicle stalling in traffic, and delayed shifting or gear slippage. These sudden changes make my car behave unpredictably; risking rear-end collisions or loss of control. This puts myself, my passengers, and others at risk. I am unsure if the problem been reproduced or confirmed by a dealer or independent service center. The vehicle and/or component have not been inspected by the manufacturer, police, insurance representatives or others. However, the vehicle received Service in December 2025 for a transmission fluid replacement for maintenance and no issues were reported at the time. There were not any warning lamps, messages or other symptoms of the problem prior to the failure. The issues first appeared in mid-June, around June 15, 2026, where I could hear a grinding noise when I drove. On July 1, I was driving home and experienced stalling while turning right at a stoplight. I took the car in for a diagnostic inquiry on 7/18/2026 and was notified I had a transmission issue. I took it for a second opinion, where it was confirmed it was transmission. I took it to Toyota and on 7/22/2026, they confirmed it was transmission issues requiring a full replacement with no financial assistance citing my warranty has ended and my service history is not thorough enough. Toyota has already extended the warranty for Canadian drivers due to this exact safety hazard.
Had the car brand new since 2020 just started to hear noises took it to the dealership and they said the transmission needs to be replaced
Transmission bearing is going out. I hear a whine noise while driving. And took it to a Transmission shop and was told the Transmission bearing goes out alot on these types vehicle. And i just bought this car used 1 month ago.
My 2020 Toyota C-HR is exhibiting clear, escalating symptoms of the known K114 CVT internal bearing defect, creating an active safety hazard while driving. The transmission has not failed completely yet, but it regularly experiences high-pitched whining noise, sudden hesitation during acceleration, and loud grinding-like noise which gets louder and faster as I speed up. This behavior creates a significant safety risk because the vehicle unexpectedly fails to accelerate when merging onto the highway / hesitates unpredictably at busy intersections, exposing me to the risk of a rear-end collision. The car is less than 6 years old, and a mechanic/dealership has diagnosed it as an impending internal bearing failure. Toyota Canada has already acknowledged this exact flaw by extending the CVT warranty to 10 years. However, Toyota USA refuses to act, forcing American drivers to choose between operating an increasingly unpredictable, unsafe vehicle or paying $10,000+ out of pocket to replace a component with a known manufacturing defect. I am filing this to urge the NHTSA to investigate before this transmission suffers a complete, dangerous failure at highway speeds.
I purchased my Toyota CHR 2020 LE right off the lot in 2020. In 2023, I had to replace my first transmission, THANK GOD THAT ONE WAS UNDER WARRANT. It is now 2026 and I am again, having to replace my transmission. This is a real safety concern. Just in the beginning stage of failure my car is sluggish to accelerate and I live in Houston, TX! People will run you over here if you aren't careful. No to mention the highway robbery that is being committed for having to pay half the cost of my car for a new transmission that is absolute garbage. It is absolutely ridiculous that no one has done anything about this yet. You sell a vehicle you know is having these issues without disclosing them. Shame on everyone involved.
Started hearing a whining noise shortly after buying this car and found out it is an internal bearing failure inside the CVT transmission that is widely known in these vehicles to fail but there has been no recalls to correct the problem and could cost me money I don't have to get it fixed.
Presentate dai proprietari di questo anno modello e non verificate da NHTSA: il racconto di una persona, non un fatto accertato.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.
Rimedio: Toyota will notify owners, and dealers will inspect the rear seat belt assembly production dates, and replace the assemblies, as necessary, free of charge. The recall began February 7, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 19TB22 and 19TA22.
Pubblicati per anno modello, non per VIN: potrebbero non riguardare questo veicolo o essere già stati eseguiti. Verifica con un concessionario.
A flaw in the vehicle's combination meter programming causes it to deteriorate its memory. Due to this the display of the monitor may not work, removing access to the speedometer and warnings. This increases the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a specific software update error that can cause an abrupt reset, the data communication module (DCM) may not restart at the next ignition cycle. It will no longer be possible to initiate an emergency call using the eCall system, increasing the risk of injuries, delayed assistance in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The design of the accessory immobilizer is not robust enough. It allows the vehicle to be in 'Ready ON' mode even when no match is found between the vehicle and its key but will switch the vehicle to 'Ready OFF' after. It can happen while driving, which will stop the car and increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abbinati per marca e nome del modello: Safety Gate non pubblica il VIN. Controlla le date di produzione e cita il codice del richiamo al concessionario.