3 richiami e 159 segnalazioni di proprietari registrati per questo anno modello.
Questa pagina descrive il modello. Per sapere come è equipaggiata una singola auto e se il suo identificativo è valido, decodifica il VIN.
Decodifica un VINQuasi tutto questo riguarda l’anno modello, non la singola auto. Nulla qui può dirti chilometraggio, incidenti o proprietà di questo veicolo: nessun identificativo li codifica.
YESTERDAY (APRIL 18, 2021), WHILE I WAS EXITING THE EXPRESSWAY TO THE TOWN OF SILVERTHORNE, COLORADO, THE SUNROOF GLASS OF MY BMW X1 SPONTANEOUSLY SHATTERED INTO MY HEAD AND MY WIFE'S AND OF COURSE ALL OVER THE CAR. I WAS TRAVELLING ABOUT 50MPH AND SLOWING DOWN TO THE EXIT RAMP; THERE WAS NO VEHICLE AHEAD OF US. MY WIFE AND I SUSTAINED SOME SMALL CUTS AND I FEEL LIKE THERE IS A SENSATION OF A FOREIGN OBJECT IN MY EYES THAT SEEMS TO GO AWAY AND BACK AGAIN. NO OTHER INJURIES BEYOND THAT.
2016 BMW X1 NEW SAV EQUIPPED WITH COMFORT ACCESS . APPROACHED LOCKED PARKED HATCHBACK AND DEPRESSED HATCH EXTERIOR LOCK HANDLE. HATCH OPENED TO MID-HEIGHT OPENING TO ALLOW 6 FT TALL PERSON TO GET INTO THE TRUNK HATCH AREA. WITHIN APPROXIMATELY TEN SECONDS, LOUD WARNING SOUND PLAYED WHILE HATCH STARTED TO AUTOMATICALLY CLOSE. THIS WAS STARTLING AND UNEXPECTED. TRIED TO REMOVE MYSELF QUICKLY FROM VEHICLE AND WAS STRUCK BY CLOSING TAILGATE. SUFFERED BLEEDING FOREHEAD GASH AND NEEDED SEVERAL STITCHES AT THE EMERGENCY ROOM. DID NOT HIT ANY BUTTONS ON THE VEHICLE OR THE REMOTE KEY. ALSO DID NOT DO ANY FOOT WIGGLE DANCE OR KICKING IN PROXIMITY OF REAR BUMPER TO ACTIVATE CLOSURE OF HATCH TAILGATE (THIS FEATURE IS SILLY BUT I CAN APPRECIATE IT BEING UTILIZED TO OPEN THE HATCH, BUT NOT TO CLOSE IT IN ANY CIRCUMSTANCE DUE TO SAFETY CONCERNS). I WAS GIVEN AN INDIRECT IMPRESSION AFTER THE INCIDENT THAT BECAUSE THE CAR WAS ARMED WITH THE ALARM SYSTEM THAT PERHAPS IT TREATED THE OPENING OF THE HATCH AS AN INTRUSION THEREBY CLOSING ITSELF. HOWEVER I CANNOT SUBSTANTIATE THIS AS I DO NOT WANT TO SACRIFICE FURTHER INJURY ). UNCLEAR OF WHY THIS HAPPENED BUT IN THE INTEREST OF SAFETY THE AUTO CLOSURE SHOULD NOT PHYSICALLY OCCUR UNLESS A PHYSICAL BUTTON IS DEPRESSED. THERE ARE FOUR SUCH BUTTONS ON THIS VEHICLE: ON THE LOWER DRIVERS DOOR, TWO ON THE INSIDE RIGHT HAND EDGE OF THE TAILGATE, ANOTHER ON THE REMOTE KEY. I HOPE THIS NOTICE WILL MAKE OTHER X1 USERS AWARE OF THIS CONCERN. I DO HOPE THE MANUFACTURER WILL PROGRAM OR DESIGN A FIX TO ADDRESS THE CONCERN. IT IS A PROBLEM AND PERHAPS A HIDDEN DANGER AS ONE DOES NOT EXPECTED TO BE MAMED OR INJURED BY THEIR CAR IN THIS MANNER. BMW NJ CORPORATE WAS INFORMED AND SUGGESTED TO WORK OUT A FIX DIRECTLY WITH THE BMW DEALER. MANUFACTURER SHOULD REDESIGN FEATURES TOWARDS CUSTOMER SAFETY.
I BELIEVE THAT THE EXHAUST TAIL PIPES COME OUT TOO FAR. I WAS GETTING SOMETHING OUT OF THE REAR OF MY X1 AND BURNED MY LEFT LEG ON THE LEFT REAR EXHAUST PIPE. THE CAR WAS PARKED ON A NEIGHBORHOOD STREET AND TURNED OFF AT THE TIME. HOWEVER, I HAD JUST FINISHED DRIVING IT.
The rear defroster burst into flames. Melting the paneling and wiring
YOUR BOX WAS BAD IT WOULD JUMP OUT A GEAR FORCE ME TO HIT A CURB AT ONE TIME. ALL WHEEL DRIVE WAS BAD. BACK WHEELS PUSH FRONT WHEELS SO FRONT TIRES WEAR OUT ABOUT EVERY 2000 MILES, NO NOTICE OF RECALL GIVEN. AIR BAG PROBLEM NO NOTICE OF RECALL SENT. ROOF UNSAFE NOT AIR BAGS. SEAT BELTS, NO RECALL NOTICE SENT. ON X1 IS LARGE BUT I GEAR BOX WAS BAD THE CAR WOULD JUMP OUT OF GEAR, AT ONE POINT I HIT A CURB MESS UP THE WHEEL, NO NOTICE WAS SENT. SOMEONE HIT THE BACK OF MY CAR WHEN THE CAR JUMP OUT OF GEAR AND LEFT A MARK. I ONLY RECEIVED ON RECALL NOTICE. KNOW IT'S ON NET BMW X1'S HAVE BEEN RECALLED FROM 2015-2020. THE ONE NOTICE WAS DRIVERS SEAT BELT, MY LEASE WAS EXTENDED FOR 6 MONTHS AND DID NOT ADVISE ME OF ALL THE OTHER PROBLEMS AND I WAS DRIVING AN UNSAFE CAR FROM 2016/SEPT THRU 2020 WITH NO KNOWLEDGE. I RETURNED THE CAR AND AFTER PAYING 6 MONTHS OF EXTRA PAYMENTS THEY WANT ME TO PAY FOR DAMAGES THAT THE RECALLS CALL CAUSED. WHY ARE THEY NOT SENDING NOTICE OF ALL THE PROBLEMS THE CAR HAS. DOSE SOMEONE HAVE TO DIE BEFORE SOMETHING IS DONE.
Known HVAC-produced moisture drainage issue that cause water to get trapped inside the system and cabin air filter housing, causing significant mold or mildew to grow on the filter itself and spread spores through cabin ventilation system and contaminates air inside cabin which poses serious health hazards.
- Roof and pillars I have been having for almost a year when trying to open and slide on the track. It is harsh and noisy. - Engine oil filter housing and coolant leak. This issue is critical. Finally on April 10, 2025 I ended spending $1007.52 to get the housing replaced to stop the ongoing drip drip effect. - Steering gear box. This issue remains despite the fact that I replaced struts. For almost a year since I bought the vehicle, there appears to be a clunking type noise especially when going over rail tracks on the road where I am forced to almost come to a complete stop to let the car go over the tracks out of fear of sustaining damage.
Odometer Fraud. The contact purchased a 2016 BMW X1. The contact stated that it was discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 81,295, and at the time of registration, it was discovered that the mileage was 135,400.
My 2016 BMW X1 28i is leaking coolant. I am also getting a smell of something burning inside the car when driving. This is consistent with problems associated with the 2024 recall for water pump. I was told by my dealership that my vehicle was not one affected by the recall. I think it might be one that is. The vehicle could catch fire if there is a failure of the wiring.
About 24 months back the sunroof curtain of my BMW X1 started having problems when I retract or operate it. It used to make stretching noises when I tried to open my sunroof and after a few times I heard a crackling noise and before I can stop it the curtain tore. Initially it was a small tear, so it did not bother much but over time the curtain completely left the guide/rail on one side and started sagging. Given it is a sunroof the curtain is as long as the vehicle and so now it is sagging to a point that it obstructs driver's visibly in back mirror. BMW won't do anything about it saying it is out of warranty and ultimately to avoid accidents I had to remove the curtain completely. I also tried getting it fixed, but the issue is not just the curtain but the rails of the curtain which is a non-replaceable part :( I would have to replace full sunshade assembly which is upwards of $1600. Also, it seems to be a common problem with these vehicles. Here are more examples of it: [XXX] . Please help me and other drivers be safe on the road. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Sunroof shade came off the tracks and is now sagging partially obstructing the view of my rear view mirror, if this sags more or falls off completely I will be unable to see out the rear window and can cause a collision. I see this has been an issue with multiple vehicles and should be addressed with the company immediately.
Every time I get in or out of my car, the secure vehicle against rolling indicator light comes on.
Error message when getting in the truck says “Secure vehicle against rolling”.
The car is indicating the I need to press the parking brake to secure the car from rolling after I have placed it in park and pressed the electronic parking brake.
"Secure vehicle from rolling" keeps coming on the dashboard when I turn the car off or put into park.
Presentate dai proprietari di questo anno modello e non verificate da NHTSA: il racconto di una persona, non un fatto accertato.
BMW of North America, LLC (BMW) is recalling certain 2016-2019 X1 sDrive28i and X1 xDrive28i vehicles. In the event of a crash where the occupants head contacts the B-pillar, the pillar may not absorb an adequate amount of the impact. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 201, "Occupant Protection in Interior Impact."
Rimedio: BMW will notify owners, and dealers will replace the vertical trim pieces on the upper portion of the interior B-Pillars, free of charge. Interim letters notifying owners of the safety risk were mailed July 1, 2019. Second notices will be sent as parts become available, starting on September 27, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain model year 2016-2017 X1 sDrive28i, X1 xDrive28i, MINI Hardtop 4 Door Cooper, Mini Hardtop 4 Door Cooper S, MINI Cooper Clubman, and Cooper S Clubman, 2017 Rolls-Royce Ghost, and 2016 528i vehicles. The vehicle-sensitive locking mechanism of the seat belt Emergency Locking Retractor (ELR) for the driver's seat may not lock as designed. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."
Rimedio: BMW will notify owners, and dealers will replace the driver's seat belt assembly, free of charge. The recall began July 3, 2019. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling one model year 2016 MINI Cooper Hardtop 2 Door vehicle manufactured November 24, 2015, and one BMW X1 Sports Activity Vehicle (SAV) manufactured October, 19 2015. The steering gearbox may have been manufactured with incorrect parts.
Rimedio: BMW will replace the steering gearbox, free of charge. Affected vehicles are located in dealer inventory and will be remedied before customer retail. The recall began on December 28, 2015. Owners may contact BMW customer service at 1-800-525-7417.
Pubblicati per anno modello, non per VIN: potrebbero non riguardare questo veicolo o essere già stati eseguiti. Verifica con un concessionario.
The seatbelts in the second row may not have been manufactured correctly and could cause the car-sensitivity sensors to fail. This could reduce the protective effect of the seatbelts and lead to injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat belts of the car were not manufactured correctly. In the event of a collision or accident, the restraint function of the seat belts may be reduced and may not provide the necessary protection. As a result, there may be an increased risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cell modules in the vehicles concerned were not produced in accordance with the specifications, which may cause the module frame to fail. This may lead to a shutdown of the high-voltage system and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The material used for the B-pillar reinforcement plates is inadequate. This can alter the crash characteristics, leading to an increased risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The front left seat's height adjustment mechanism may have been incorrectly riveted, potentially compromising the seat's structural integrity. In an accident, this could have a negative impact on the restraint system and increase the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat recliner adjuster may not be correctly welded, which could cause the backrest not to lock. If it doesn't lock, the seatback might not stay secure in a collision, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abbinati per marca e nome del modello: Safety Gate non pubblica il VIN. Controlla le date di produzione e cita il codice del richiamo al concessionario.