7 rappels et 77 signalements de propriétaires enregistrés pour cette année modèle.
Cette page décrit le modèle. Pour savoir comment une voiture précise est équipée et si son identifiant est valide, décodez son VIN.
Décoder un VINPresque tout ceci décrit l'année modèle, pas la voiture précise. Rien ici ne renseigne sur le kilométrage, les accidents ou la propriété de ce véhicule : aucun identifiant ne les encode.
MOLD IN BRAND NEW TOYOTA 4RUNNER HVAC MAKING ME AND MY FAMILY ILL TOYOTA APPEARS TO BE AWARE OF THE PROBLEM, AND IGNORING IT, AT BOTH THE DEALERSHIP AND NATIONAL HEADQUARTERS, APPEARS TO BE A PROBLEM IN BOTH NEW AND OLDER TOYOTA'S NUMEROUS ONLINE COMPLAINTS OF THE ISSUE. FLORIDA ATTORNEY GENERAL HAS INVESTIGATED SIMILAR ISSUES. NUMEROUS ONLINE COMPLAINTS AND NUMEROUS LITIGATION ON THE PROBLEM. *TR
Vehicle was involved in an accident where the driver side airbag did not deploy.
GREATLY REDUCED SAFETY IN FRONTAL IMPACT DURING AN ACCIDENT DUE TO CORRODED FRAME COMPONENTS CAUSED BY FACTORY INSTALLED FOAM PIECES THAT RETAIN RAIN WATER. THIS PROBLEM HAS BEEN NOTICED, PERSONALLY BY ME, ON MULTIPLE TOYOTA 4RUNNERS OF MODEL YEARS 2014-2016 SO FAR. THE CORROSION DAMAGE ON MY VEHICLE MAKES ME FEEL UNSAFE WHILE DRIVING TO WORK AND NOT ADEQUATE TO BE TOWED FROM THE FRONT HOOKS INCASE OF AN EMERGENCY. I TRIED TO BRING THIS CONCERN TO A LOCAL TOYOTA SERVICE DEPARTMENT AND THAT WAS OF NO HELP. IMAGES ARE ATTACHED BELOW THAT SHOW HOW THE FACTORY FOAM PIECES SURROUNDING THE RADIATOR AND ITS "SHROUD" HAVE CAUSED A HIGHLY CONCERNING AMOUNT OF RUST ON THE VEHICLE'S BUMPER AND FRAME SUPPORT MEMBERS. THESE FOAM PIECES GET WET FROM DRIVING IN THE RAIN AND RETAIN THE WATER. THIS OVERTIME CAUSED THE RUST SHOWN BELOW. THE NEWER MODEL VEHICLES SEEM TO HAVE A RUBBER FLAP RATHER THAN FOAM WHICH WOULD PREVENT WATER DAMAGE ON THE FRAME MEMBERS. MAHALOS ## VIN PASSED ## TOYOTA 2014 ##
I had a collision and rear ended a truck. My front left bumper was completely damaged. My chest hit the steering wheel. My airbags did not deploy.
TAKATA RECALL - I WAS IN A SERIOUS WRECK AND MY AIR BAGS NEVER DEPLYED
I WAS THE SECOND CAR WAITING FOR THE LIGHT TO TURN GREEN SO I COULD MAKE A LEFT. SUDDENLY A HONDA CRV MADE AN OPEN RIGHT TURN AND HIT THE CAR IN FRONT OF ME AND MYSELF. MY TOYOTA SUFFERED EXTENSIVE DAMAGE COMPARED TO THE DAMAGE OF THE CRV. WHEN I LOOK AT MY CAR I FIND THAT THERE IS NO STEEL BUMPER AT THE EXTREME LEFT OR RIGHT OF THE VEHICLE. MY CAR WAS STATIONARY. SINCE THERE IS NO BUMPER TO PROTECT THE VEHICLE THE ENTIRE PANELS ON THE ENGINE COMPARTMENT SHIFTED SLIGHTLY TO THE RIGHT. THIS IS MEDIOCRE AND FRAUDULENT ENGINEERING FROM TOYOTA. IT IS ALSO A SAFETY ISSUE.
TL* THE CONTACT OWNS A 2014 TOYOTA 4RUNNER. AFTER PLACING THE SHIFTER IN THE REVERSE POSITION, THE VEHICLE SUDDENLY EXPERIENCED UNINTENDED ACCELERATION. WHILE DRIVING IN REVERSE, THE VEHICLE ACCELERATED TO 20 MPH BEFORE CRASHING INTO A SECOND VEHICLE. DURING THE INCIDENT, THE BRAKES WOULD NOT STOP THE VEHICLE. A POLICE REPORT WAS FILED AND THERE WERE NO INJURIES. THE CAUSE OF THE FAILURE WAS NOT DETERMINED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS 32,000.....UPDATED 02/06/17 *BF CONSUMER STATED CRASHED INTO THIRD VEHICLE. UPDATED 8/30/18*JB
I am reporting what I believe is a design defect involving the Secondary Air Injection (SAI) System on my 2014 Toyota 4Runner. My vehicle illuminated the Check Engine Light and stored Diagnostic Trouble Code P2440 (Secondary Air Injection System Switching Valve Stuck Open). During my inspection, I found that the factory-installed foam air pump filter had completely deteriorated and was missing. The filter appears to have disintegrated over time rather than being removed during maintenance. The filter is intended to prevent contaminants from entering the Secondary Air Injection pump and switching valves. Once it deteriorates, debris can enter the system, potentially contaminating the switching valve and causing the P2440 fault. This failure caused my vehicle to enter reduced-power ("limp") mode, resulting in a significant loss of engine power and acceleration. This created a safety hazard because the vehicle could not accelerate normally while driving, increasing the risk when merging into traffic, crossing intersections, or traveling at highway speeds. Toyota has discontinued the original replacement foam filter, preventing owners from restoring the system with the factory-designed component. Numerous other owners have reported similar failures involving deteriorated or missing foam filters, P2440/P2442 diagnostic codes, and costly Secondary Air Injection System repairs. I respectfully request that NHTSA investigate whether deterioration of this factory foam filter is a design or material defect that allows contamination of the Secondary Air Injection System and can lead to limp mode and reduced engine performance. If confirmed, Toyota should provide an appropriate remedy, such as redesigned components or an extended warranty for affected vehicles. This failure appears to result from deterioration of an original factory component rather than improper maintenance or normal wear and presents a potential safety concern for other Toyota 4Runner owners.
White Paint Peeling From Metal Body Panels
The contact owns a 2014 Toyota 4Runner. The contact purchased four Bridgestone tires in 2022, Tire Line: Alenza AS Ultra, Tire Size: 245/60/R20, DOT Number: 1RBTEAAU1. The contact stated that all four tires had developed cracks on the sidewalls and by the tire beads. The tires were replacement tires. The tire dealer was contacted and advised the contact that it was normal wear on the tires. The manufacturer was notified of the failure. The tire failure mileage was approximately 20,000. The vehicle failure mileage was 80,000.
paint is peeling on my 2014 Toyota 4runner . Toyota recalled for white paint but nothing for blue . i already paid so much for the car but not paying extra for the paint . Toyota should fix it .
My exhaust pipe rusted apart after the muffler causing the hot exhaust to expel upward and melt a rubber grommet on the floor. Then it proceeded to shoot into cargo area, melting the carpet backing and Styrofoam pad and insulation under the cargo area carpeting. This happened on an 11 hour road trip with the cargo area full of vacation stuff. I'm concerned about this being a potential fire and carbon monoxide issue.
The handsfree calling/talking is unusable neither party can hear the other due to it echoing and has very distortion. So I'm unable to use my handsfree talking while driving.
I notice my gas wasn't lasting long. One day I was pumping gas and noticed that underneath my 4-runner gas was pouring out from the top of my fuel tank. Took it to the dealership and they repaired the charcoal canister, canister assembly and purge valve assembly. Cost me $953.48 with parts and labor. Very dangerous due to it could have started a fire while driving.
Stumbling/Studering and hesitation when accelerating took it to dealership and they performed a tune-up and complete fuel system service when to pick it up and still doing the same thing. Dealership rechecked it and said Torque converter was faulty. Had to replace transmission.
Déposées par des propriétaires de cette année modèle et non vérifiées par la NHTSA : le témoignage d'une personne, pas un fait établi.
Toyota Motor Engineering & Manufacturing (Toyota) recalled certain 2018-2019 4Runner, Highlander, Camry, Land Cruiser, Sequoia, Sienna, Tacoma and Tundra, and Lexus RC 300, RC 350, GS 350, GX 460, IS 300, LC 500, LS 500, LX 570, RX 350L, and 2019 Toyota Avalon and Corolla, and certain Lexus NX 300, and ES 350 vehicles on January 13, 2020. On March 4, 2020, Toyota expanded the recall to include certain 2014-2015 Toyota 4Runner and Land Cruiser, 2018 Avalon, Corolla, 2014 FJ Cruiser, 2017 Sienna and Lexus 2018 ES 350, 2018-2019 GS 300, 2013-2014 GS350, 2014-2015 GX 460, IS 350 and LX 570, 2014 IS F, 2018-2019 IS 350, LC 500H and LS 500H, 2013-2015 LS 460, 2015 NX 200T and RC350, 2017 RC 200T and RX 350. Toyota also removed the 2018-2019 Toyota 4Runner and Land Cruiser and 2018-2019 Lexus GX 460 and LX 570 and 2019 NX300 from inclusion in this recall. On March 19, 2020, Toyota expanded the recall to include 2015 Lexus GS350 vehicles. The low-pressure fuel pump inside the fuel tank may fail.
Solution : Toyota will notify owners, and dealers will replace the fuel pump, free of charge. The recall began May 4, 2020. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are 20TB02 and 20TA02 for Toyota vehicles and 20LB01 and 20LA01 for Lexus vehicles.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Solution : Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2014-2016 Toyota 4Runner, 2014-2015 Scion xB, Lexus IS350C, IS250C, 2014 Toyota Sienna, Lexus IS-F, and 2014-2017 Lexus GX460 vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Toyota is also recalling certain 2011-2013 Toyota Corolla, Corolla Matrix, Lexus IS250, IS350, 2011-2016 4Runner, 2011-2015 Scion xB, Lexus IS350C, IS250C, 2011-2014 Toyota Sienna, Lexus IS-F, 2011-2017 Lexus GX460, and 2011-2012 Lexus ES350 vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Toyota is also recalling certain 2010-2013 Toyota Corolla, Corolla Matrix, Lexus IS350, 2010-2016 4Runner, 2010-2013 Lexus IS250, 2010-2015 Scion xB, Lexus IS350C, IS250C, 2010-2017 Lexus GX460, 2010-2014 Lexus IS-F, and 2010-2012 Lexus ES350 vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Solution : Toyota will notify owners. Depending on the vehicle model, dealers will replace the front passenger air bag inflator, or replace the air bag assembly. The recall began February 15, 2019. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are "Zone A" Toyota: G0P, Lexus: GLG; "Zone B" Toyota: G0R, Lexus GLH; "Zone C" Toyota: H0A, and Lexus: HLA.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2011-2016 Toyota Tacoma and 4Runner vehicles equipped with accessory hood scoops installed by SET or SET dealers. The adhesive attaching the hood scoop may weaken, allowing the hood scoop to detach from the vehicle.
Solution : SET will notify owners, and dealers will mechanically fasten the scoop to the hood, free of charge. The recall began on September 1, 2017. Owners may contact SET customer service at 1-954-429-2000. SET's number for this recall is SET17B.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2015 Toyota 4Runner vehicles manufactured September 3, 2009, to December 1, 2014. The affected vehicles may be equipped with accessory exhaust tips installed by SET or SET dealers that may contact people and possibly burn them while they are standing behind the vehicle.
Solution : SET will notify owners, and dealers will install a re-designed exhaust tip that is smaller in diameter and is more recessed behind the bumper, free of charge. The recall began September 15, 2016. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET16D.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2015 Toyota 4Runner vehicles manufactured March 29, 2010, to July 30, 2015. The affected vehicles may be equipped with accessory exhaust tips installed by SET or SET dealers that may contact people and possibly burn them while they are standing behind the vehicle.
Solution : SET will notify owners, and dealers will install a re-designed exhaust tip that is smaller in diameter and is more recessed behind the bumper, free of charge. The recall began on September 22, 2015. Owners may contact SET customer service at 1-866-405-4226. SET's number for the recall is SET15D.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2014-2015 Toyota 4Runner, Tacoma, FJ Cruiser, Land Cruiser, RAV4, Scion FRS, and XB vehicles. The affected vehicles may have accessories installed by SET, such as running boards or other items, that were incorrectly installed. The accessory attaching fasteners were not tightened with the proper torque, possibly causing the accessory to detach from the vehicle.
Solution : SET will notify owners, and dealers will inspect and tighten the affected bolts, free of charge. The recall began February 23, 2015. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET-14B.
Publiés par année modèle et non par VIN : ils peuvent ne pas concerner ce véhicule, ou avoir déjà été effectués. À confirmer auprès d'un concessionnaire.