4 llamadas a revisión y 45 quejas de propietarios registrados para este año del modelo.
Esta página describe el modelo. Para ver cómo está equipado un coche concreto y si su identificador es válido, decodifica su VIN.
Decodificar un VINCasi todo esto describe el año del modelo, no el coche concreto. Nada de aquí dice nada sobre el kilometraje, los accidentes o la titularidad de este vehículo: ningún identificador los codifica.
The vehicle out of nowhere began to make a werid clacking noise (possibly the lifters so we thought) my husband immediately pulled off the freeway the car sputtered; The engine immediately SEIZED, BEGAN TO SMOKE, and CAUGHT FIRE.
Car started smoking from under front hood while driving, while pulling to a stop, smoke started flooded cabin with my son and grandchildren in the car. They all got out safely but then the front engine and car exploded in flames.
I WAS IN AN ACCIDENT ON 6/29/2013 WITH MY NEW RANGE ROVER SPORT LUXURY MODEL. WE TOOK IT TO LAND ROVER OF GLEN COVE FOR REPAIRS. AFTER 30 DAYS THE CAR WAS NOT REPAIRED AND I WAS TOLD THE 1/4 PANEL WAS ON BACK ORDER UNTIL 8/23/13. APPROX 8/20/13, I WAS TOLD THAT THE PART WAS NOT COMING AND IT WAS PUSHED BACK TO 9/23/13. AFTER FOLLOWING UP EARLIER THIS WEEK, I AM NOW BEING TOLD THAT THE PART IS NOT COMING UNTIL "POSSIBLY" 10/30/13. THEY CLAIM THERE IS NOT ONE SINGLE 1/4 PANEL IN STOCK ANYWHERE IN THE ENTIRE USA, AND IT IS BEING MADE AND SHIPPED FROM THE UK, "HOPEFULLY" IT WILL SHIP ON 10/16/13 FROM THE UK, HAVE TO GO THROUGH CUSTOMS AND BE AVAILABLE BY THE END OF OCTOBER. HARD TO BELIEVE IT WILL EVEN COME THEN AFTER ALL OF THE OTHER FALSE PROMISES, BUT IF IT DOES THE SOONEST I WOULD GET MY CAR BACK IS MID NOVEMBER; 4.5 MONTHS LATER. I CAN'T BELIEVE THAT AUTOMOTIVE MANUFACTURERS ARE NOT REQUIRED TO STOCK PARTS FOR NEW CARS? I FEEL THAT THERE IS NO END IN SIGHT AND EVEN AFTER COMPLAINING TO LAND ROVER CORPORATE, ALL I AM TOLD IS SORRY YOU HAVE TO WAIT NOTHING WE CAN DO. IS THERE NO PROTECTION OR RECOURSE FOR A CONSUMER? *JS
TL* THE CONTACT OWNS A 2012 RANGE ROVER EVOQUE. THE CONTACT STATED THAT HE STARTED THE ENGINE AND EXITED THE VEHICLE WHEN THE VEHICLE INDEPENDENTLY ROLLED AWAY AND CRASHED INTO ANOTHER VEHICLE. THERE WERE NO INJURIES. THE VEHICLE WAS TAKEN TO THE DEALER FOR INSPECTION WHERE THEY STATED THAT THE GEAR SHIFT MODULE NEEDED TO BE REPLACED. THE VEHICLE WAS REPAIRED. THE MANUFACTURER WAS NOTIFIED BUT PROVIDED NO ASSISTANCE. THE FAILURE MILEAGE WAS 14,000. UPDATED 4/26/13 *CN THE CONSUMER DISCOVERED IN CASE OF AN EMERGENCY, THE TRANSMISSION COULD NOT BE LOCKED UP AS IN THE CASE OF BRAKE FAILURE OR IF THE THROTTLE BY WIRE MALFUNCTIONED. HE ALSO FOUND OUT, DURING HIS LAST VISIT AT THE DEALER, THE VEHICLE COULD NOT BE PLACED IN NEUTRAL IF IT WAS BEING TOWED. UPDATED 05/01/13
In January 2025 I noticed light ticking/knocking at startup, idle, and while driving. On January 23, 2025 I searched online for how to check the oil level and for an L322 dipstick location (there is none). Only after finding a YouTube video with an undocumented override (double-pressing the “Cancel” button) was I able to see the oil level on January 31, 2025, and it showed zero. I added oil immediately, but the knocking gradually worsened over the following months until very loud clattering began on July 4, 2025. The electronic oil level monitoring and warning system failed. When I followed the owner’s manual procedure to check the oil, the display repeatedly showed “Oil Level Not Available” and never gave any low-oil or no-oil warning, even when the actual oil level was zero. Because this system is the only way to check oil level on this vehicle (there is no dipstick), it prevented me from knowing the engine had no oil. The engine then suffered progressive internal bearing/rod damage and now makes extremely loud clattering. The vehicle and components are still in my possession and are available for inspection upon request. The system’s failure meant I unknowingly drove the vehicle with zero oil, which can cause sudden engine failure, loss of power, and possible engine seizure while driving at highway speed. I used this vehicle on Los Angeles freeways, so a sudden loss of power could have led to an accident or left me stranded in a dangerous location. The vehicle now runs with severe clattering and is unsafe to drive, so I have parked it to avoid a complete failure in traffic. The vehicle has been parked since the severe failure on July 4, 2025 because I have not yet been able to afford towing and diagnostic work. There were no low-oil or oil-pressure warning lamps at any time. Prior to the failure, when I tried to check the oil level using the procedure in the owner’s manual, the display repeatedly showed the message “Oil Level Not Available.”
Gearbox failure. NO warning lamps, symptoms or messages prior to the incident. While driving down the road, upon accelerating; the vehicle would not move forward. The shift was in drive. There was an indicating (grinding) noise beneath the vehicle. Had this been on a highway it had great potential to become a severe danger to myself and passengers, or other drivers! found to be transfer case and connecting transmission spline ground to a powder. It was towed to the Land Rover service department.
The car leaked all antifreeze. This is a 2012 Range Rover sport that has the same problem as the recall N623. “ The recall number for the 2012 Land Rover Range Rover is N623. The recall was for certain 2010–2013 Range Rover Sport and 2010–2016 LR4 vehicles with 3.0L V6 or 5.0L V8 engines”. The dealerships refused to take in consideration my vehicle or reimburse for the cost to fix.
Leaking antifreeze. The car has the same issues for Recall number po84.
The contact owns a 2012 Land Rover Range Rover Sport. The contact stated that while the vehicle was parked, the contact noticed a fuel odor around the exterior of the vehicle. In addition, the contact noticed the fuel odor on the interior of the vehicle. The vehicle was taken to the dealer where it was diagnosed with a fractured gasoline fuel tank flange assembly and that the gasoline fuel tank flange assembly needed to be replaced. The vehicle was repaired under NHTSA Campaign Number: 21V635000 (Fuel System, Gasoline). The contact stated that due to health issues, the vehicle was parked for a while; however, recently the vehicle was taken for a smog test. The vehicle failed the smog test due to fuel odor and the check engine light was illuminated. The vehicle was taken back to the dealer, however the vehicle was not diagnosed or repaired. The vehicle was taken to another dealer where the vehicle was diagnosed with a fractured fuel tank flange assembly and that the fuel tank flange assembly needed to be replaced. The contact was informed that the recall repair for NHTSA Campaign Number: 21V635000 (Fuel System, Gasoline) was not completed when performed on 03/2022 by the previous dealer. The vehicle was scheduled to be repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 39,554.
When curving left, driving 50mph, the slightest bump, such as a lane marker makes the front passenger wheel bounce independently from the other three tires and makes the steering wheel shake. It's possible to lose control. The problem has been identified as a control arm. I have had this problem repaired 3 times. Why does this keep happening, specifically to that side? Repairs took place in 2016, 2018, 2024
Fuel leaking an different problems happen do to fuel default.
The motor has timing chain issues they all do I was quoted 8000 dollars to fix it 90k Miles on car.
The contact owns a 2012 Land Rover Range Rover. The contact stated that when she entered the vehicle, she was unable to close the front passenger’s side door. There was an unknown warning light illuminated. The contact became aware that the front passenger’s side door latch was fractured. The vehicle was taken to a local dealer, where the door latch was replaced; however, the contact then stated that the driver's door was unable to close. The contact became aware that the door latch was also fractured. The vehicle was not repaired. The manufacturer was made aware of the failure and the contact referenced NHTSA Campaign Number: 20V387000 (Latches/Locks/Linkages); however, the VIN was not included in the recall. The approximate failure mileage was 49,000.
The component that Failed was the transmission outline Spline due to lack of lubrication from the factory. This causes the component to fail over time due to corrosion. When this component fails it makes the whole driveline fail/slip. Can happen while making a turn with fast approaching vehicles coming at your through the opposite lane. Also makes the vehicles parking function fail. As the car will roll freely when the shift indicator is in the Park position. The problem has been diagnosed by a certified Mechanic There are no warning lamps, messages or symptoms when this problem happens. Everything is working fine and the next second it is failing.
1.) SAFETY RECELL N623: GASOLINE FUEL TANK FLANGE ASSEMBLY CRACKING- I HAVE CONTACTED THE LAND ROVER DEALERSHIP SEVERAL TIMES AND NO ONE WILL HELP ME SCHEDULE THE APPOINTMENT TO SERVICE MY VEHICLE. THE CUSTOMER SERVICE REPS ARE RUDE AND VERY UNHELPFUL. 2.) MY VEHICLE WAS ALSO INCLUDED IN A CLASS LAWSUIT REGARDING THE TIMING CHAINS AND TENSIONERS- THE LAW SUIT WAS APPROVED IN JUNE AND I SUBMITTED ALL OF MY DOCUMENTATION. NO ONE FROM THE CLAIMS ADMINISTRATION WILL CONTACT ME BACK.
Presentadas por propietarios de este año del modelo y sin verificar por la NHTSA: el relato de una persona, no un hecho probado.
Corrosion of the airbag connector may increase electrical resistance, which could prevent the driver airbag from deploying correctly in the event of an accident. This increases the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag connectors in the steering column has shown that they may corrode. Over time, the airbag might not deploy as intended and therefore could increase the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver and front passenger airbags may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The idler pulley on the front-end accessory drive (FEAD) belt may over-rotate due to high torsional stress and collide with the oil temperature and pressure sensor. This could damage the sensor and cause an oil leak, creating a slipping hazard for other road users, particularly two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective module has been installed in the high-voltage battery, which may cause it to overheat and lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The middle seatbelt buckle in the second row of seats may have been incorrectly produced. An incorrectly positioned inner cable can lock the belt tongue and prevent correct locking. In the event of an accident, an improperly locked seatbelt buckle can increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Cathode damage during production may accelerate battery ageing and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The passenger airbag module may tear during deployment as a result of improper folding during the airbag assembly process. In case the airbag is torn, it will not provide adequate protection to occupants and may increase the risk of injury in a crash. Hot gases could escape, causing burns to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to brackets connecting the engine-mounted oil cooler lines not being properly screwed into their threads, the oil cooler hose may become loose or detach, causing engine oil to spill onto the road. This creates slippery sections, increasing the risk of accidents and injuries, especially for two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear cradle may have cracks that can cause the rear wheels to partially detach, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic used for the oil filter housing in some petrol and diesel engines can crack over time. This can cause oil leaks onto the engine and road. Leaked oil can ignite upon contact with hot engine parts, increasing the risk of a fire. Moreover, it can also create slippery sections, increasing the risk of accidents and injuries especially for two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Water can infiltrate the rear lamps, leading them to stop working, increasing the risk of rear-end collision accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Emparejadas por marca y nombre de modelo: Safety Gate no publica el VIN. Comprueba las fechas de fabricación y facilita el código de la llamada al concesionario.
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2011-2012 Land Rover Range Rover vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Unless included in "Zone B" above, Land Rover is recalling certain 2010-2012 Land Rover Range Rover vehicles, originally sold, or ever registered, in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Solución: Land Rover will notify owners, and dealers will replace the front passenger air bag assembly, free of charge. The recall began June 27, 2018. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is P084.
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2012 Land Rover Range Rover vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan) and the U.S. Virgin Islands, or "Zone A." Additionally, Land Rover is recalling certain 2009 Land Rover Range Rover vehicles, originally sold, or ever registered, in Arizona, Arkansas, Delaware, the District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia and West Virginia, or "Zone B." Additionally, Land Rover is recalling certain 2007-2008 Land Rover Range Rover vehicles originally sold, or ever registered in Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin and Wyoming. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Solución: Land Rover will notify owners, and dealers will replace the front passenger air bag assemblies, free of charge. The recall began December 18, 2017. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is P082.
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain model year 2006-2012 Land Rover Range Rover vehicles manufactured April 15, 2005, to September 4, 2012. One or both of the flexible front brake hoses may rupture causing loss of brake fluid.
Solución: Land Rover will notify owners, and dealers will replace the left and right front brake hoses, free of charge. The recall began on July 28, 2015. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is P054.
Land Rover is recalling certain model year 2012 Range Rover vehicles. During the manufacturing process, the windshields on these vehicles may have been installed incorrectly.
Solución: Land Rover will notify owners, and dealers will replace the windshields. The recall began on October 29, 2012. Owners may contact Land Rover at 1-800-637-6837.
Publicadas por año del modelo, no por VIN: pueden no afectar a este vehículo o ya estar resueltas. Confírmalo con un concesionario.