4 llamadas a revisión y 22 quejas de propietarios registrados para este año del modelo.
Esta página describe el modelo. Para ver cómo está equipado un coche concreto y si su identificador es válido, decodifica su VIN.
Decodificar un VINCasi todo esto describe el año del modelo, no el coche concreto. Nada de aquí dice nada sobre el kilometraje, los accidentes o la titularidad de este vehículo: ningún identificador los codifica.
MY 2009 BMW Z4 WAS PARKED IN MY DRIVEWAY AT ABOUT A 65 ANGLE TO THE REAR OF MY TOYOTA PICKUP TRUCK. I GOT INTO THE BMW INTENDING MOVE IT INTO THE GARAGE. THE CAR HAS A STANDARD TRANSMISSION AND WAS IN FIRST GEAR WITH THE PARKING BRAKE ON. I DEPRESSED THE CLUTCH PEDAL AND STARTED THE ENGINE. AN INSTANT AFTER THE PARKING BRAKE RELEASED, THE RUBBER CLUTCH PEDAL COVER SLIPPED OFF THE CLUTCH PEDAL TAKING MY FOOT WITH IT. THE BMW SHOT FORWARD. THE FRONT RIGHT FENDER OF THE BMW STRUCK THE LEFT REAR BUMPER OF THE TOYOTA PICKUP TRUCK STALLING THE ENGINE OF THE BMW. THE RESULTING DAMAGE TO THE BMW IS APPROXIMATELY $5000.00 AND THE DAMAGE TO THE TOYOTA PICKUP TRUCK IS APPROXIMATELY $550.00. TUESDAY, SEPTEMBER 29, 2009, I TOOK THE BMW INTO THE AUSTIN BMW DEALER. THE RUBBER PEDAL COVER WAS REATTACHED WITH 'SUPERGLUE' AND I LEFT THE DEALERSHIP. TWO DAYS LATER I TOOK THE BMW TO A BODY SHOP. WHEN I RETURNED HOME, I FELT THE RUBBER CLUTCH PEDAL COVER BEGIN TO 'SLIP' AS I DROVE UP MY DRIVEWAY. THE NEXT DAY I AGAIN TOOK THE CAR INTO THE BMW DEALER. THE RUBBER PEDAL COVER WAS 'LOOSE' BUT DID NOT COME COMPLETELY OFF. I TALKED TO THE SERVICE MANAGER AND SCHEDULED A CONFERENCE WITH THE BMW FACTORY REP AT HIS NEXT VISIT. ON WEDNESDAY, OCTOBER 21ST I RETURNED THE CAR TO THE DEALERSHIP FOR EXAMINATION BY THE FACTORY REP. WHEN THE CAR WAS RETURNED TO ME THE CLUTCH PEDAL HAD BEEN REATTACHED. I WAS TOLD THE FACTORY REP WOULD BE IN CONTACT WITH ME WITHIN TWO WEEKS. 'SCOTT' FROM BMW HEADQUARTERS (NEW JERSEY?) CALLED ME ON NOVEMBER 4, 2009 AND TOLD ME THAT THEY HAD MANUFACTURED 10,000 OF THIS MODEL AND HAD RECEIVED NO OTHER COMPLAINTS OF CLUTCH PEDAL COVERS COMING OFF. I BELIEVE THE RUBBER CLUTCH PEDAL CURRENTLY IN THE VEHICLE IS THE ORIGINAL. THE DEALER PROVIDED ME WITH A CUSTOMER COPY OF THE WORK ORDER ON MY FIRST VISIT. THE DEALER DID NOT PROVIDE ME WITH ANY WRITTEN DOCUMENTATION ON MY SUBSEQUENT TWO VISITS. *TR
The airbag sensor in my passenger seat has failed. I have been quoted approximately $2000 to repair this. However researching online I see BMW Service Bulletin SB-[XXX] which indicates this may be a widespread problem? [XXX] I am concerned to take passengers in the vehicle as I do not know if the airbags will deploy, or deploy at the wrong "rate" based on my understanding of how the sensors work. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Drivers side seat belt frayed at the point where it comes out of the vehicle when I am seated and buckled in. This is nearly impossible for me to see and I only saw it by chance pulling the seat belt out for some incidental reason. I am unclear how long it had been like this. Otherwise this defect is completely hidden as it disappears into the vehicle when I unbuckle.
THE SEAT BELT IS FRAYING AT THE POINT WHERE IT MOST COMMONLY RESTS AGAINST THE CHASSIS WHILE I AM WEARING IT. IT SEEMS TO BE RUBBING AGAINST THE CAR CAUSING IT TO FRAY. I ONLY NOTICED IT BY CHANCE, AS IT IS NOT A COMMON SPOT TO LOOK AT WHILE SEATED IN THE VEHICLE.
EBRAKE FAILURE. I WENT ON THE Z4 FORUM AND MANY PEOPLE REPORT THIS SAME ISSUE OF THE ELECTRONIC PARKING BRAKE / EMERGENCY BRAKE SIMPLY FAILING TO WORK.
WHEELS DEVELOPED CRACKS AND AIR WAS LEAKING.
TL* THE CONTACT OWNS A 2009 BMW Z4. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 17V683000 (ENGINE AND ENGINE COOLING); HOWEVER, THE PART TO DO THE REPAIR WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE DEALER AND MANUFACTURER WERE NOT NOTIFIED. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
TL* THE CONTACT OWNS A 2009 BMW Z4. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 17V683000 (ENGINE AND ENGINE COOLING); HOWEVER, THE PART NEEDED FOR THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE CONTACT CALLED MCKENNA BMW AT (562) 219-4570 (LOCATED AT 10900 FIRESTONE BLVD, NORWALK, CA 90650) AND WAS INFORMED THAT THE PART WAS NOT AVAILABLE. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.
ENGINE UNEXPECTEDLY STALLED AND SHUTDOWN WHILE IN MOVEMENT WITH POTENTIAL TO CAUSE ACCIDENT. VEHICLE CANNOT BE TURNED ON UNTIL FULL STOP IS ACHIEVED AND TRANSMISSION PLACED IN "P." IDLE ENGINE RPM CONTINUES TO VARY DRASTICALLY UP AND DOWN WITH INDICATION A PROBLEM PERSISTS AND IS LIKELY POSE THE SAME SAFETY RISK. I BOUGHT VEHICLE USED ON 2012 AND HAD THE ISSUE SHORTLY AFTER PURCHASE TWICE AT HIGHWAY SPEEDS. DEALERSHIP TOOK MONTHS TO APPARENTLY RESOLVE. I AM BACK AT RISK.
REAR WHEELS ON BMW Z4 CRACKED DURING NORMAL ROAD USAGE. BOTH CRACKED WITHIN A MONTH OF EACH OTHER. THESE ARE 19" WHEELS WITH RUN FLAT TIRES AND 296 WHEEL DESIGN. THESE WHEELS DON'T SEEM TO BE DESIGNED FOR PUBLIC ROAD USAGE BUT ARE ADVERTISED AS SUCH. THEY CANNOT WITHSTAND EVEN MINOR ROAD IMPERFECTIONS. BMW REFUSED TO COVER UNDER WARRANTY AND DOESN'T ACKNOWLEDGE THE WHEEL DESIGN AS DEFECTIVE DESPITE NUMEROUS REPORTS WITH THIS EXACT WHEEL. THEY NO LONGER SELL THE WHEEL ON NEW VEHICLES AND IN FACT EVEN REDESIGNED THE WHEEL IN 2012. *TR
THE CAR HAS STALLED MULTIPLE TIME WHEN COMING TO A STOP. IN SOME INSTANCES I DID NOT HAVE TO COME TO A COMPLETE STOP SUCH AS CROSSING A DIVIDED HIGHWAY, JUST SLOWED SIGNIFICANTLY. AS I WENT TO ACCELERATE THROUGH THE INTERSECTION THE ENGINE HAD STALLED AND I WAS STUCK IN THE MIDDLE OF THE INTERSECTION WITH NO POWER. CAR STARTS RIGHT BACK UP EACH TIME BUT YOU MUST STOP TO PLACE THE CAR IN DRIVE(AUTOMATIC TRANSMISSION). NEARLY HIT BY ONCOMING TRAFFIC ON 3 SEPARATE OCCASIONS. DEALERSHIP WAS ABLE TO REPLICATE, SOLD ME A $400 BATTERY AS THE FIX. CAR STALLED ON THE WAY HOME FROM DEALERSHIP. RETURNED THE CAR BUT THEY COULD NOT REPLICATE AND SINCE THE INSTANCES DID NOT PRODUCE A FAULT CODE THEY COULD DO NOTHING. CAR CONTINUES TO STALL WHICH MAKES IT A SAFETY HAZARD. THERE ARE 100'S OF POST ON BMW FORUMS WITH THE SAME ISSUE BUT BMW CLAIMS TO HAVE NO KNOWLEDGE OF THE ISSUE. SOMEONE NEEDS TO STEP IN AND MAKE THEM ADDRESS THE ISSUE. THIS IS NOT THE KNOWN BATTERY CABLE ISSUE, THAT WAS REPLACED PER RECALL. *TR
WHEN I GOT INTO MY CAR ONE MORNING THE SENSOR WENT OFF LETTING ME KNOW THAT I HAD A LOW TIRE PRESSURE. I WENT AND FILLED THE TIRE TO THE PROPER LEVEL; I THOUGHT EVERYTHING WAS FINE, THEN THE NEXT FOLLOWING MORNING THE SAME THING HAPPENED. I TOOK THE CAR IN TO GET IT CHECKED OUT AND THEY FOUND THAT THE RIM WAS CRACKED IN 4 PLACES. I WAS WONDERING HOW THE RIM COULD HAVE GOTTEN CRACKED CAUSE I BARELY DRIVE THE CAR, SITS IN THE GARAGE MOST OF THE TIME, I DRIVE ON EVEN ROADS WHEN I DO, BUT I HAVE ONLY HAD THE CAR FOR 4 MONTHS, PURCHASED IT FROM CAR MAX. I WENT TO VARIOUS POSTS AND FOUND OUT THAT THERE IS A PROBLEM WITH THE RIMS THAT BMW PUT ON THE Z4 35I BECAUSE THEY ARE RUN FLAT TIRES (WHICH MY CAR INITIALLY HAD ON THEM). WHEN I PURCHASED THE CAR, RUN FLATS WASN'T ON THIS CAR. I THINK THERE SHOULD BE A RECALL ON THESE WHEELS (RIMS) BECAUSE IF THE RIM FAILED WHILE ON THE HIGHWAY...IT COULD HAVE BEEN DEVASTATING. *TR
ALUMINUM WHEEL (STYLE 296) CRACK ON THE INSIDE BEAD. CAR HAS 22,000 MILES ON 1/23/14 AND 3 WHEELS CURRENTLY HAVE CRACKS. THE CRACKS PREVENT THE TIRES FROM MAINTAINING AIR PRESSURE AND LOWERS THE STRUCTURAL INTEGRITY OF THE RIM, CAUSING A SAFETY HAZARD. BMW IS ONLY OFFERING TO REPAIR ONE WHEEL UNDER WARRANTY BECAUSE THE RUNOUT ON THE OTHER 2 WHEELS WAS 0.059" WHICH THEY ARE CLAIMING INDICATES THAT THE WHEELS ARE DAMAGED DUE TO A ROAD HAZARD BUT OFFERED NO VISUAL EVIDENCE OF DAMAGE. ONLINE RESEARCH INDICATES THERE IS A HIGH RATE OF FAILURE OF THE 296 STYLE WHEEL AND CONTRIBUTING FACTORS INCLUDE THE DESIGN OF THE 19" WHEEL, THE USE OF 30 SERIES (REAR) OR 35 SERIES (FRONT) RUN-FLAT-TIRES AND THE NEGATIVE CAMBER. THE NEGATIVE CAMBER PUTS THE MAJORITY OF THE FORCES AND LOAD FROM THE ROAD ONTO THE INSIDE BEAD OF THE RIM. THE RUN-FLAT-TIRES HAVE EXTREMELY STIFF AND SHORT SIDEWALLS TO ALLOW THE TIRES TO BE DRIVEN WITH NO AIR, WHICH TRANSMITS THE FORCES FROM THE ROAD DIRECTLY TO THE RIM WITHOUT THE NORMAL CUSHION OF A STANDARD TIRE. THE DESIGN OF THE RIM DOES NOT ADD ADDITIONAL STRENGTH TO THE INSIDE BEAD TO MAKE UP FOR THE ADDITIONAL LOADS CAUSED BY THE CAMBER AND RUN-FLAT-TIRES. *TR
I HAD A SLOW TIRE LEAK SO I TOOK MY CAR IN TO GET CHECKED. TURNS OUT MY 2 REAR WHEELS ARE CRACKED.THIS IS COMMON PROBLEM FOR OWNERS WITH THE 296 WHEEL ON THE Z4. *TR
MY REAR RIMS HAVE DEVELOPED CRACKS WHILE DRIVING RESULTING IN QUICK LOSS OF TIRE PRESSURE AND IN SOME CASES DESTROYING TIRE. THIS HAS HAPPENED TO BOTH THE LEFT AND RIGHT SIDES, HOWEVER THUS FAR HAS ALWAYS BEEN ISOLATED TO THE REAR (MODEL 296 19") RIMS. IN THE 16 MONTHS I HAVE OWNED THIS VEHICLE, THIS HAS HAPPENED SEVERAL TIMES INCLUDING ON 5/11/2012, 9/9/12, 4/12/13 AND 5/23/13. EACH TIME I HAVE PURCHASED A NEW RIM OR HAD THE EXISTING RIM REPAIRED AT THE DISCRETION OF THE DEALER. IN NONE OF THESE CASES HAS THERE BEEN ANY IMPACT OR DRIVING CONDITION THAT EXPLAINS THE FAILURE. *TR
Presentadas por propietarios de este año del modelo y sin verificar por la NHTSA: el relato de una persona, no un hecho probado.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 1 Series Coupe (128i); 2007-2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007-2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008-2013 1 Series Convertible (128i); 2006-2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006-2012 3 Series Wagon (328i, 328i xDrive); 2007-2013 3 Series Convertible (328i); 2006-2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 Series Wagon (530xi); 2007-2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006-2008 Z4 Coupe (Z4 3.0si); and 2006-2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i) vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Solución: This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Dealers will install an electrical wiring harness with fuse protection for the PCV Valve heater in potentially affected vehicles, free of charge. This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Vehicles previously repaired under the prior recalls will need to come back for the new recall remedy. The remedy is currently being developed. Interim owner notification letters informing owners of the safety risk were mailed on April 1, 2022. Owner notification letters were mailed on July 22, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Solución: BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through June 2011; and 2009-2011 Z4 vehicles manufactured March 2009 through June 2011. In February 2013, BMW recalled 504,545 vehicles. In July 2013, BMW informed the agency that it was adding 1-Series, 3-Series, and Z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.
Solución: BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
BMW IS RECALLING CERTAIN MODEL YEAR 2009 Z4 30I AND 35I VEHICLES MANUFACTURED BETWEEN MARCH 10 AND MARCH 19, 2009. A DEFECTIVE CRIMP CONNECTOR IN A BELT TENSIONER WIRING PLUG MAY LEAD TO INCREASED ELECTRICAL RESISTANCE OF THAT CONNECTION.
Solución: THE SAFETY BELT TENSIONER WIRING WILL BE REPAIRED FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 5, 2009. OWNERS MAY CONTACT BMW CUSTOMER RELATIONS AT 1-800-525-7417.
Publicadas por año del modelo, no por VIN: pueden no afectar a este vehículo o ya estar resueltas. Confírmalo con un concesionario.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Emparejadas por marca y nombre de modelo: Safety Gate no publica el VIN. Comprueba las fechas de fabricación y facilita el código de la llamada al concesionario.