2 llamadas a revisión y 91 quejas de propietarios registrados para este año del modelo.
Esta página describe el modelo. Para ver cómo está equipado un coche concreto y si su identificador es válido, decodifica su VIN.
Decodificar un VINCasi todo esto describe el año del modelo, no el coche concreto. Nada de aquí dice nada sobre el kilometraje, los accidentes o la titularidad de este vehículo: ningún identificador los codifica.
THE VEHICLE WAS PARKED IN A GARAGE AND SET ON FIRE, RESULTING IN A HOUSE BEING BURNED DOWN AND THE FATALITY OF MY FATHER. THE FIRE MARSHAL'S REPORT WAS INCONCLUSIVE AS TO HOW THE FIRE STARTED.
ALL SERVICE AND REPAIRS OF THIS CPO PERFORMED BY DEALERSHIP. FIRE CAUSED TOTAL LOSS OF VEHICLE IN EXCELLENT CONDITION MELTING INTERIOR AND NEARLY BURNING DRIVER-DAMAGE MOST SEVERE ON DRIVER'S SIDE OF VEHICLE AND EXTENDS TO THE CAR EXTERIOR. FIRE STARTED WHILE VEHICLE MOVING ON HEAVILY USED PUBLIC ROAD SHORTLY AFTER WARNING SYMBOL FOR BLINKERS ACTIVATED AND BLINKERS ON PASSENGER SIDE INCREASED IN SPEED. *TR
TL* THE CONTACT OWNS A 2006 BMW Z4. THE CONTACT STATED THAT WHILE PARKED, THE CONTACT USED THE KEYLESS ENTRY TO UNLOCK THE DOOR AND THE VEHICLE CAUGHT ON FIRE. THE CONTACT CALLED THE FIRE DEPARTMENT WHO STATED THAT THE FIRE WAS CAUSED BY AN ELECTRICAL COMPONENT. THE MANUFACTURER WAS CONTACTED ABOUT THE FAILURE. THE VEHICLE WAS DESTROYED. THE FAILURE MILEAGE WAS 75,000.
TL*THE CONTACT OWNS A 2006 BMW Z4. THE CONTACT STATED WHILE DRIVING 35 MPH, THE STEERING PULLED TO THE RIGHT OR THE LEFT. WHILE MAKING A RIGHT TURN, THE STEERING PULL TO THE RIGHT AND THE VEHICLE CRASHED INTO THE CURB CAUSING EXTENSIVE DAMAGES TO THE FRONT FENDER AND SIDES. THERE WERE NO INJURIES. THE VEHICLE WAS TOWED TO THE DEALER WHO STATED THERE ARE NO RECALLS FOR THE STEERING PROBLEM. THE MANUFACTURER WAS CONTACTED WHO STATED HE SHOULD TAKE THE VEHICLE TO THE DEALER FOR AN INSPECTION AND OFFERED NO FURTHER ASSISTANCE. THE FAILURE MILEAGE WAS 55,000.
The electronic steering has failed several times while driving. This makes it very difficult to maintain a lane and avoid other vehicles. This problem continues intermittently. Thousands of Z4 owners have reported the same issue in online forums.
In hot weather, the steering binds, making keeping the car in the correct lane extremely difficult. The car will dart from one side to the other. The car will be nearly impossible to keep in the correct lane.
I have just found out that my 2006 BMW Z4 Convertible has serious wiring issues. The wires for example on my front headlights the insulation is falling off the and leaving bare wires. I am very concerned this could be a fire safety issue that could result in bare electrical wires shorting together and starting a car fire. My research shows that many people who have 2006 BMW Z4 Convertibles are having this same issue. This seems to be a real issue with BMW using cheap wiring harnesses material and over time due heat and cooling is cause the insulation to fail and resulting in this issue.
When the car gets hot (parked in the sun) the steering becomes knotchy or sticky and the car becomes difficult to control. No problems whatsoever when the car is cool or on a cooler day. This problem has been witnessed by a BMW technician and there are no warning lights. This appears to be a fairly common issues with these cars.
The contact owns a 2006 BMW Z4. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the check engine warning light illuminated. The vehicle was taken to an independent mechanic who diagnosed that the PCV valve heater needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 50,000. VIN tool confirms parts not available.
The contact owns a 2006 BMW Z4. The contact received a notification for NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer had been notified of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2006 BMW Z4. The contact stated that while operating the vehicle, the check engine warning light illuminated and the vehicle lost motive power and stalled. Additionally, there was a burning odor on the inside and outside of the vehicle. The vehicle was taken to an independent mechanic who changed the engine spark plugs however, the failure persisted. The local dealer and manufacturer were not notified of the failure. The failure mileage was 120,000.
The contact owns a 2006 BMW Z4. The contact stated that while at a complete stop at the traffic light, the vehicle overheated and stalled. The coolant temperature warning light illuminated. The contact waited for the vehicle to cool down and then restarted the vehicle and continued driving. The contact stated that the failure reoccurred several times. The vehicle was towed to the dealer several times. The dealer completed the engine lifters replacement and other unknown repairs however, the failure persisted. The contact stated while stopped at the traffic light, the vehicle began to overheat significantly and stalled. There was no warning light illuminated. The contact noticed smoke coming from underneath the hood of the vehicle. The contact immediately exited the vehicle. The contact later pushed the vehicle to the side of the road with assistance. The vehicle was towed to an independent mechanic where it was diagnosed that the engine needed to be replaced. The contact later received notification of NHTSA Campaign Number: 19V273000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 52,000. VIN tool confirms parts not available.
The Steering wheel gets Hard, looks like power steering gets disabled automatically while driving, making it almost impossible to steer. This has started to happen after hot weather had started few months back. I have tried to reproduce this issue several times, but it happens randomly and Not all the time. I don't drive the car much. But this is definitely a serious issue, I checked the BMW community and a lot of people are facing this issue. Not Sure how many have filed a complaint here. But this definitely should be addressed by BMW as this is not just one person facing this issue, there are hundreds and thousands of them. Level of severity is high, as someone who might have not faced this issue yet might suddenly face it on the highway could result in an extremely fatal accident. Havent reported to BMW yet, But found this issue is being faced by alot of people I thought to file my complaint here. I will soon get it repaired or replaced. There were no Warning lamps or messages prior to this. It started happening in September 2021.
When the outside temperatures are warmer (mid 80's and above) the steering wheel will stick in the center position and require it to be jerked a bit to keep control. This occurs at all speeds, but does not seem to be the case when stopped. since it requires the steering wheel to be jerked to correct, it can cause the car to swerve. I have had the car for several years began noticing the issue once the weather got warmer. The date entered below is today's date, but I have had the issue for perhaps 5 years.
During warm weather the steering will momentary stick while driving which requires additional force to overcome. This happens at all speeds but is more noticeable at highway speeds while trying to maintain vehicle in driving lane. There are numerous complaints of this on the NHTSA site. I have written to BMW North America about this safety problem and mentioned the multitude of similar complaints but they refuse to address the problem and suggest I purchase a new steering column at $2500+!
Presentadas por propietarios de este año del modelo y sin verificar por la NHTSA: el relato de una persona, no un hecho probado.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 1 Series Coupe (128i); 2007-2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007-2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008-2013 1 Series Convertible (128i); 2006-2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006-2012 3 Series Wagon (328i, 328i xDrive); 2007-2013 3 Series Convertible (328i); 2006-2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 Series Wagon (530xi); 2007-2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006-2008 Z4 Coupe (Z4 3.0si); and 2006-2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i) vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Solución: This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Dealers will install an electrical wiring harness with fuse protection for the PCV Valve heater in potentially affected vehicles, free of charge. This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Vehicles previously repaired under the prior recalls will need to come back for the new recall remedy. The remedy is currently being developed. Interim owner notification letters informing owners of the safety risk were mailed on April 1, 2022. Owner notification letters were mailed on July 22, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2006 525i, 525xi, 530i, 530xi, 530xi Sports Wagon, 325i, 325xi, 325xi Sports Wagon, 330i, 330xi, Z4 3.0i and Z4 3.0si vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Solución: BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. The recall began May 30, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion to recall 17V-683.
Publicadas por año del modelo, no por VIN: pueden no afectar a este vehículo o ya estar resueltas. Confírmalo con un concesionario.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Emparejadas por marca y nombre de modelo: Safety Gate no publica el VIN. Comprueba las fechas de fabricación y facilita el código de la llamada al concesionario.