1 llamada a revisión y 11 quejas de propietarios registrados para este año del modelo.
Esta página describe el modelo. Para ver cómo está equipado un coche concreto y si su identificador es válido, decodifica su VIN.
Decodificar un VINCasi todo esto describe el año del modelo, no el coche concreto. Nada de aquí dice nada sobre el kilometraje, los accidentes o la titularidad de este vehículo: ningún identificador los codifica.
We heard a whining sound under the hood on November 1st, 2025. Prior to noticing this noise, there were no warming lamps or messages appearing. Following a short drive we smelled burning in the garage. We did not drive the vehicle the following day and intended to take it to our mechanic on Monday morning, the 3rd. Upon trying to start the car it was dead. We had to have it professionally jumped as standard jumping with our personal jumper cables would not start it. Our mechanic explained both the battery and the water pump would need to be replaced. Upon further examination, he realized that the cable or water pump harness that connects the two had been burned and discovered a recall on thousands of 2017/2018 X4 models. He called us and encouraged us to take it to BMW as he found the recall and assumed they would take care of it. Upon calling our local dealership, they looked up our VIN and said our model was not part of the recall. We proceeded with the repair as we had to have our vehicle. Once those parts were replaced, it was also discovered that the issue caused the entire DME/ECU unit to go bad. Our mechanic then ordered that directly from BMW. Once in he had it reprogrammed and we got the car back. We were without a vehicle for a month. We would ask that you please review this as it's clear, this was the exact issue that has affected thousands of other BMW X4 Models. It is a safety issue as we smelled the burning in our garage and learned later that it could have started a fire either while driving it or in our garage at home. Our VIN should be included in the recall. Upon calling BMW of North America Customer Service, they told us to file a complaint on nhtsa.
Unknown: Dealership replaced my brakes however they weren’t working properly I reported it 3 times BMW said it was common about 2 weeks later I was involved in a car accident where the brakes failed to respond and I rear ended another car.
The contact owns a 2018 BMW X4. The contact stated that when she would stop the vehicle for a traffic signal, the vehicle would independently shift into park (P). The contact stated that the failure had started as an intermittent failure but had gradually become a recurring failure. The contact stated no warning light was illuminated. The contact stated that the failure had been the cause of a recent crash at a traffic signal. The contact's vehicle had slipped into park (P) when the signal light changed to green her vehicle did not move forward and the vehicle behind her crashed into the rear bumper. The contact stated that there was minor damage to the other vehicle's front bumper and no damage to her vehicle, both vehicle's were able to drive away. The contact had taken the vehicle to a local dealer after the first failures, where it was diagnosed and determined that the battery needed to be replaced. The vehicle had been repaired. The contact stated that she drove the vehicle back to the same dealer following the crash and the dealer diagnosed that the crank position sensor needed to be replaced. The vehicle had not been repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 100,000.
The water pump was found to have extreme corrosion after several other components on the car were damaged from the coolant leak into the electrical system. The car was suddenly losing power while driving and the DME was smoking, potentially causing an engine fire. So far the water pump, Digital Motor Electronics (DME) and throttle body were replaced over a 15 day period in service. The day the car was picked up, the chassis stabilization light came on and the dealership was receiving codes saying multiple additional electrical systems are now triggering the codes. The car was back at the dealer for service and now they are saying even more systems have been damaged by the leak. There is currently a recall on the water pump for this model and year, although this exact VIN is not included in the recall. Initial overheat warnings came on July 22, 2025 just prior to the car going in the shop although the dealer didn't see that the car was overheating. The fault codes were coming up as electrical. Only the dealer has inspected the car thus far. I content this car should have been included in the recall for the water pump as the description of the recall fits the exact damage to the water pump in my car.
The contact owns a 2018 BMW X4. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The dealer was contacted on several occasions; however, the contact was informed that parts were not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
Water pump completely failed and no longer working. I had to pull off of road on a busy interstate. Firestone confirmed water pump no longer working. Vehicle is at BMW service center. No warning until vehicle overheated and warning came on.
The contact owns a 2018 BMW X4. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while operating the vehicle there was a burning odor coming from the engine compartment. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the failure. The failure mileage was 75,000. VIN tool confirms parts not available.
The contact owns a 2018 BMW X4. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2018 BMW X4. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.
The contact owns a 2018 BMW X4. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that after starting the vehicle, the vehicle occasionally failed to move. The vehicle was not diagnosed or repaired. VIN tool confirms parts not available.
I got 2018 bmw x4 and 7year/80000km warranty from the bmw store in vancouver on jun 25,2019.I used to drive to seattle to shopping and eating. I and my husband drived this car from vancouver to edmonton on jun 1,2022. On jun 4,the engine sign and change oil sign all light up . on jun 6 we drived to the bmw edmonton to maintanance.on jun 7 they told me this car eccentric shaft faulty,the car mechanic show us the eccentric shaft already broken ,if i direct drived back to vancouver the engine maybe suddenly shut down or slower down on the highwat.and I must repair car in edmonton and pay total repair fee later back to vancouver to claim the warranty ,i called the bmw store vancouver rep he said ok.that time this car is 64500 km. when I back to the bmw store vancouver to claim this case.they answer me this case is my fault ,i was not done the maintenance for a while, so on july 20 2022 i sued thr bmw store. A trail will be held on oct 12,2022. today i do this complaint i just want to know the reason for eccentric shaft faulty ,what cause this engine problem,it possible make engine suddenly shut down or slower down ,very dangerous ,sometimes somebody will not immediately to change oil. actually i did regular maintance on 45000km,51800km,59000km. just give me a email back before the trail day oct 12,2022 ,thanks a lot.
Presentadas por propietarios de este año del modelo y sin verificar por la NHTSA: el relato de una persona, no un hecho probado.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Emparejadas por marca y nombre de modelo: Safety Gate no publica el VIN. Comprueba las fechas de fabricación y facilita el código de la llamada al concesionario.
BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.
Solución: Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.
Publicadas por año del modelo, no por VIN: pueden no afectar a este vehículo o ya estar resueltas. Confírmalo con un concesionario.