7 llamadas a revisión y 74 quejas de propietarios registrados para este año del modelo.
Esta página describe el modelo. Para ver cómo está equipado un coche concreto y si su identificador es válido, decodifica su VIN.
Decodificar un VINCasi todo esto describe el año del modelo, no el coche concreto. Nada de aquí dice nada sobre el kilometraje, los accidentes o la titularidad de este vehículo: ningún identificador los codifica.
on [XXX] I was going into a Parking Garage in Beverly Hills, CA. I got a little too far from the ticket machine so I put the BMWX3 in PARK and PUT the Emergency Brake on so I could open my door, step out and grab the ticket. The car immediately rolled backwards into a Dodge Charger behind me. That woman is suing for $150,000. It caused my insurance to double, I had to have PT on my pelvis. I had to pay the deductible to get the car repaired. BMW will not take responsibility for the malfunction. My Dad was a professional driver for FORD and I have never caused an accident in my [XXX] years of driving. The woman claims that she and her children were injured but no air bags deployed. the car rolled. It did give me quite a jolt. Her car showed no visible damage but mine was damaged - tail pipe and bumper. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The front collision warning failed and had not given any problem prior to the failure. We were in a car accident where a person turned left (we were going straight) and passed right in front of us when we hit them. The Forward Collision Warning did not display and our vehicle was deemed a total loss by the insurance. We may of avoided the accident if the sound and display of the warning had triggered.
1. The primary failure occurred within the electrical system and engine compartment wiring. According to the official forensic report (Ref No: XXX by the Ministry of Internal Affairs of Georgia, the fire originated in the engine compartment due to an electrotechnical fault (short circuit). 2. The vehicle spontaneously exploded and caught fire while parked in a closed, underground parking facility of a commercial building. This created an immediate risk of: Mass casualties due to smoke inhalation and potential structural collapse of the parking ceiling. Fire spreading to dozens of adjacent vehicles.The explosion occurred without any prior warning, posing a lethal threat to anyone nearby. 3. The failure was officially confirmed and documented through a State Forensic Examination. The Ministry of Internal Affairs’ Forensic-Criminalistic Department conducted a comprehensive technical audit. They ruled out any external factors (arson/accelerants) and confirmed an internal electrical short circuit as the sole cause. 4. Yes. The vehicle was inspected and seized as evidence by the Criminal Police and the State Forensic-Criminalistic Department of Georgia. 5. There were no warning lights or messages displayed on the dashboard prior to parking the vehicle. The incident was a spontaneous combustion that occurred while the vehicle was stationary and unoccupied. please note that uploaded police documents are in Georgian language and I will be able to send over official translations upon request. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
While driving, noticed smoke coming from under the hood. Immediately pulled in a parking lot where the smoke turned to fire and burned the entire car by the time fire dept arrived. I was the only person in the car and was luckily able to exit the vehicle before the actual fire started. Incident reported to insurance company and they are investigating. There were no dash warning lights of any kind.
On April 26, 2025, while driving my 2022 BMW X3, the vehicle suddenly emitted smoke and caught fire. Fortunately, all five passengers, including myself, were able to exit the car before it became fully engulfed in flames. The car was destroyed and is a total loss. The BMW app later displayed a “drivetrain malfunction” message, which did not appear until after the fire had already started. The vehicle was still under the manufacturer’s 48-month new vehicle warranty and had no open recalls at the time. Routine maintenance and service had been performed at authorized BMW dealerships. I am concerned this fire may have resulted from a manufacturing defect, especially in light of similar reports and recalls involving fuel rail cracks or leakage in this model/year. No injuries were sustained, but this was a terrifying and traumatic incident, and I am now left with significant financial loss. What I am requesting: I ask that NHTSA investigate whether this fire was caused by a manufacturing defect common to the 2022 BMW X3 and whether a broader recall or corrective action is warranted
My BMW X3 was less then 1 month old with less then 200 miles. On the way home around 11PM I noticed sparks and some coming out the hood. I pulled to the side of the road and as soon as I stepped out of the car flames were coming out from under the car, drivers door. Called 911. Police and fire department showed up within 10 minutes. The fire was put out unfortunately the whole car melted by then. I'm glad I escaped unhurt. Few minutes more I could have been seriously hurt or dead.
Screen keeps glitching as if it had a false contact Dealer want to charge 1000 just to to the troubleshoot, if the problem is the screen they can replace 2000 if the problem is the computer it will be 10000. The car guarantee expired 2 months ago yet it only has 33k miles. I have taking the car for tt 2 months and the first time that sad it was a software but it still doing it
BMW issued safety recall 26V438 (starter fire risk) for my 2022 BMW X3. On September 11, 2026, BMW Arrowhead confirmed my vehicle is affected but has no parts available and no repair timeframe. I was instructed to park outside due to fire risk and to avoid driving the vehicle. When I asked the dealership for a loaner vehicle given the safety instruction, I was told: "no parts, and because of that we can't give you a loaner because there is no timeframe." I called BMW Customer Relations on September 11, 2026 and was told they would follow up. I am a parent of two minor children and have an 80-mile daily commute, and currently have no safe alternative transportation. Current odometer reading: 74,668 miles.
The contact owns a 2022 BMW X3. The contact received notification of NHTSA Campaign Number: 26V438000 (Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure.
The contact owns a 2022 BMW X3. The contact stated that while attempting to start the vehicle, the vehicle hesitated while starting. After several attempts, the vehicle started. The contact stated that the failure was intermittent, and the vehicle was eventually parked out of fear that the vehicle would no longer start. The contact retrieved a fault code associated with the starter. The local dealer and manufacturer were notified of the failure. The contact was informed that the VIN was not included in NHTSA Campaign Number: 26V438000 (ELECTRICAL SYSTEM). The contact stated that the vehicle had experienced the failure listed in the recall. The failure mileage was 46,000.
The contact owns a 2022 BMW X3. The contact received notification of NHTSA Campaign Number: 26V438000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
2022 BMW X3 M40i. The Driver Assistance system appears to activate normally after startup with no warning or indication that a fault is present. However, within approximately 3–5 minutes of driving, a Check Control message appears stating “Driver Assistance limited. Camera vision.” The vehicle then identifies affected systems including Pedestrian Warning, Frontal Collision Warning, Side Collision Warning, Automatic Lane Change, Active Blind Spot Detection, and Steering Assistant. A separate message states that Active Cruise Control is reduced and there may be no brake intervention for stationary vehicles. The safety concern is that the system can appear active and available before the warning appears, even though at least some driver-assistance functions may already not be operating. Before the warning was displayed, I observed that Steering Assistant/lane-keeping did not intervene and I crossed out of my lane without steering correction or a lane-departure warning. There was no prior warning that the camera-based system was malfunctioning. I cannot confirm whether the other affected safety functions were operational during this interval. A BMW dealer inspected the vehicle and physically found the KAFAS camera hood/trim warped from heat. The warped component was removed and shown to me, and the dealer ordered a replacement. BMW has issued SIB 66 13 23 addressing KAFAS camera hood deformation on affected vehicles. Fault memory also contained KAFAS codes 800ABF, 800ABE, and 800AC4 for camera field-of-view disturbance and calibration failure. This creates a potential safety defect because the driver may reasonably believe lane-keeping and other camera-based safety systems are functioning until the vehicle detects the failure several minutes later. The vehicle/component can be made available for inspection
- Customer Reports: ac not cooling, stopped cooling yesterday while on the highway, approved evac and recharge if needed Caused by Leaking a/c hose from compressor to condenser Tech: CHRISTOPHER ARCHER (F88) Installed 64 53 9 868 421 : B1-Pressure hose assy c Installed 64 53 9 284 018 : B1BIMIRRZN-Gasket ring Confirmed concern. Performed vehicle
belt tensioner failed while on highway without warning, leading to complete shutdown of the engine. Car had to be towed for repair. Complete disintegration of the timing belt, the car only had 51,000 miles. Expensive repair
The contact owns a 2022 BMW X3. The contact stated that while driving at an undisclosed speed in hot weather, the air conditioner failed to operate as intended. The vehicle was taken to the dealer, where it was determined that the air conditioner line was rubbing against a pulley, presenting a fire hazard. The contact was informed that the air conditioner hose needed to be replaced. The manufacturer was made aware of the failure. The failure mileage was approximately 52,000.
Presentadas por propietarios de este año del modelo y sin verificar por la NHTSA: el relato de una persona, no un hecho probado.
1 llamada incluye un aviso de no circular o de estacionar en el exterior. Comprueba si este vehículo ya fue reparado antes de conducirlo o guardarlo.
BMW of North America, LLC (BMW) is recalling certain 2021-2023 Toyota Supra, 2022-2023 2 Series Coupe, 2021-2024 5 Series (xDrive), 2021-2022 Z4, 2022-2024 4 Series (Gran Coupe), 2021-2024 4 Series (Convertible and xDrive Convertible), 2021-2023 4 Series (Coupe), 2021-2024 3 Series, 2021-2023 X4, 2021-2024 X3 vehicles. Please see the recall report for a complete list of all models. The engine starter may overheat and catch fire due to wear on an internal component.
Solución: Dealers will replace the engine starter, free of charge. Owner notification letters were mailed July 21, 2026. Owners may contact BMW customer service at 1-800-525-7417 or Toyota's customer service at 1-800-331-4331. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning March 24, 2026.
BMW of North America, LLC (BMW) is recalling certain 2019-2021 BMW 330i, 2019-2022 BMW Z4, 2020-2022 BMW 530i, X3, X4, Toyota Supra, 2021-2022 BMW 430i, 430i Convertible, and 2022 BMW 230i vehicles. The engine starter relay may corrode, causing the relay to overheat and short circuit.
Solución: Owners are advised to park their vehicles outside and away from structures until the remedy is complete. Dealers will replace the engine starter, free of charge. Owner notification letters were mailed February 6, 2026. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov November 14, 2025.
BMW of North America, LLC (BMW) is recalling certain 2022-2024 X3 sDrive30i and X3 xDrive30i vehicles. The second-row seat side door locking modules may not function properly and allow the doors to be unlocked with a single motion. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, "Door Locks and Door Retention Components."
Solución: Dealers will replace the second-row seat side door locking modules, free of charge. A letter informing owners of the safety risk was mailed on April 21, 2025. Owners may contact BMW customer service at 800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018-2022 X3 sDrive30i, X3 xDrive30i, X3 M40i, and X3 M vehicles. The attachment for the rear cargo rail may become damaged in a rear crash and result in the cargo rail detaching.
Solución: Dealers will replace the rear cargo rail attachment bolts, free of charge. Owner notification letters were mailed December 12, 2024. Owners may contact BMW customer service at 1-800-525-7417. Vehicles in this recall were previously remedied for this issue under recall number 24V-534 and will need to have the new repair completed.
BMW of North America, LLC (BMW) is recalling certain 2018-2023 X3 sDrive30i, X3 xDrive30i, X3 M40i, and X3 M vehicles. The attachment for the interior cargo rail may become damaged in a rear crash and result in the cargo rail detaching.
Solución: Dealers will replace the rear cargo rail attachment bolts, free of charge. Owner notification letters were mailed January 2, 2024. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022 X1 xDrive 28i, X3 xDrive30i, and 228i Gran Coupe vehicles. The high-pressure fuel rail may crack and result in a fuel leak within the engine compartment.
Solución: Dealers will replace the high-pressure fuel rail, free of charge. Owner notification letters were mailed September 19, 2022. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2022 330i, 530i, X3 xDrive30i, and X4 xDrive30i vehicles. The mechatronics unit inside the transmission may not have been assembled properly, which could result in an internal leak.
Solución: Dealers will replace the transmission mechatronics unit, free of charge. All of the vehicle population for this recall have been repaired. Owner notification letters were not mailed. Owners may contact BMW customer service at 1-800-525-7417.
Publicadas por año del modelo, no por VIN: pueden no afectar a este vehículo o ya estar resueltas. Confírmalo con un concesionario.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing failure, the protection of the two outer headrests in the second row is reduced. In the event of a collision or accident, passengers could be injured. In addition, headrest parts may become exposed and also cause serious injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Damaged brake discs may have been fitted to the front axle. This can lead the brakes to fail when a heavy load is placed on the wheel concerned, increasing the risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Failure to bolt the plus voltage (B+) cable tightly enough to the starter generator may result in contact problems and an increase in contact resistance at the bolted connection. This may in turn lead to local overheating and the vehicle catching fire or to the engine stalling while the vehicle is coasting. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the inflator of the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments of the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The steering system sensor may malfunction causing an unintended steering movement of the vehicle. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the servo unit on the gear rack casing of the steering system may be faulty. This could cause the steering system to fail and become blocked, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The vehicles concerned have already been modified in connection with the recall code 0051960500. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant within the integrated inflator of driver airbags can deteriorate during time. If the airbag deploys, it could result in fragments from the inflator casing injuring the vehicle’s occupants. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion, and penetrate the backs of the rear seats. This increases the risk of injury to the occupants of the rear seats. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver's airbag inflator propellant may deteriorate over time. If activated during an accident, excessive internal pressure may cause the inflator to burst, and metal fragments could pass through the cushion material causing injury to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Emparejadas por marca y nombre de modelo: Safety Gate no publica el VIN. Comprueba las fechas de fabricación y facilita el código de la llamada al concesionario.