1 llamada a revisión y 2 quejas de propietarios registrados para este año del modelo.
Esta página describe el modelo. Para ver cómo está equipado un coche concreto y si su identificador es válido, decodifica su VIN.
Decodificar un VINCasi todo esto describe el año del modelo, no el coche concreto. Nada de aquí dice nada sobre el kilometraje, los accidentes o la titularidad de este vehículo: ningún identificador los codifica.
In 2026, a 2020 BMW X2 was involved in a 40-50 mph, 60-80 degree driver-side impact. The vehicle rotated 40-80 degrees to the right and struck a curb with enough force to shear both front axles and cause multiple tire explosions. Despite this catastrophic structural failure and extreme G-forces, the Supplemental Restraint System (SRS) failed completely: no front, side, or curtain airbags deployed, and seat belt pretensioners remained inactive. In contrast, all three front airbags deployed in the striking vehicle. An independent Bosch CDR download of the Airbag Control Module (ACM) confirms "Event(s) recovered: None." This indicates a total failure of the sensing algorithm to "wake up" or acknowledge a catastrophic collision, even though the vehicle was a total loss. This failure mode mirrors NHTSA Recall 20V-283 for defective rollover/lateral sensors. The vehicle was manufactured in May 2020, immediately following the COVID-19 production restart, which was a high-risk window for supply chain irregularities, suggesting the use of defective pre-shutdown sensor inventory not currently captured by the recall VIN range. The total failure of the safety system resulted in unmitigated rotational trauma, causing a traumatic brain injury (TBI) confirmed by DTI MRI showing white-matter lesions and hemorrhage, as well as multilevel spinal stenosis and disc herniations requiring surgical intervention. Loss of lordosis in neck and back. These injuries are permanent and life-altering. Crash severity is further corroborated by external telemetry: a telematics smartphone app and an iPhone both registered the high-G impact and deceleration forces that the vehicle's internal safety module ignored. The vehicle is preserved for inspection. There were no warning lamps or system messages prior to the incident. Crash was detected by iPhone that measured impact force based on G-force. The insurance app on a separate Android phone also detected the crash based on the sudden deceleration.
WHILE SITTING AT A TRAFFIC LIGHT WITH ALL THE DOORS LOCKED, THE HATCHBACK OPENED WITHOUT ANY PROMPT FROM THE KEY FOB OR DOOR LATCH. THE CAR WAS NOT MOVING, SO I WAS ABLE TO USE THE DOOR LATCH TO CLOSE THE BACK HATCH. ABOUT 30 SECONDS LATER, THE HATCH UNLATCHED TO OPEN, BUT THE TRAFFIC LIGHT TURNED GREEN AND AS SOON AS I LIFTED MY FOOT OFF THE BRAKE, THE HATCH STOPPED OPENING AND I WAS ABLE TO DRIVE TO A PARKING LOT TO FULLY CLOSE THE HATCH AGAIN.
Presentadas por propietarios de este año del modelo y sin verificar por la NHTSA: el relato de una persona, no un hecho probado.
The seatbelts in the second row may not have been manufactured correctly and could cause the car-sensitivity sensors to fail. This could reduce the protective effect of the seatbelts and lead to injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat belts of the car were not manufactured correctly. In the event of a collision or accident, the restraint function of the seat belts may be reduced and may not provide the necessary protection. As a result, there may be an increased risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat recliner adjuster may not be correctly welded, which could cause the backrest not to lock. If it doesn't lock, the seatback might not stay secure in a collision, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Emparejadas por marca y nombre de modelo: Safety Gate no publica el VIN. Comprueba las fechas de fabricación y facilita el código de la llamada al concesionario.
BMW of North America, LLC (BMW) is recalling certain 2020 X1 xDrive28i, X1 sDrive28i, X2 xDrive28i and X2 sDrive28i, 2020 MINI Clubman Cooper S All4, 2021 MINI Hardtop 2 Door (Cooper, Cooper S, John Cooper Works and Cooper S E) and MINI Hardtop 4 Door (Cooper and Cooper S) vehicles. Due to a problem with the rollover sensor within the air bag control unit, in the event of a rollover crash, the head air bag, seat belt pretensioners and other safety systems, may not activate.
Solución: BMW will notify owners, and dealers will replace the air bag control unit, free of charge. The recall began July 17, 2020. Owners may contact BMW customer service at 1-800-525-7417 or MINI customer service at 1-866-825-1525.
Publicadas por año del modelo, no por VIN: pueden no afectar a este vehículo o ya estar resueltas. Confírmalo con un concesionario.