2016 Land Rover Range Rover Evoque
Other Land Rover models
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINThis page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN1 recall and 0 owner complaints on record for this model year.
Almost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain model year 2016-2017 Land Rover Discovery Sport vehicles manufactured May 30, 2016, to August 24, 2016, and 2016-2017 Range Rover Evoque vehicles manufactured June 7, 2016, to August 26, 2016. The affected vehicles have front lower control arm fasteners that may fail due to an assembly error, possibly resulting in separation of the steering knuckle.
Remedy: Land Rover will notify owners, and dealers will replace the hardware that connects the front lower control arm to the knuckle, free of charge. The recall began on January 27, 2017. Owners may contact Land Rover customer service at 1-800-637-6837. Land Rover's number for this recall is Q650/Q651.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Corrosion of the airbag connector may increase electrical resistance, which could prevent the driver airbag from deploying correctly in the event of an accident. This increases the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver and front passenger airbags may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The idler pulley on the front-end accessory drive (FEAD) belt may over-rotate due to high torsional stress and collide with the oil temperature and pressure sensor. This could damage the sensor and cause an oil leak, creating a slipping hazard for other road users, particularly two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective module has been installed in the high-voltage battery, which may cause it to overheat and lead to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The middle seatbelt buckle in the second row of seats may have been incorrectly produced. An incorrectly positioned inner cable can lock the belt tongue and prevent correct locking. In the event of an accident, an improperly locked seatbelt buckle can increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Cathode damage during production may accelerate battery ageing and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The passenger airbag module may tear during deployment as a result of improper folding during the airbag assembly process. In case the airbag is torn, it will not provide adequate protection to occupants and may increase the risk of injury in a crash. Hot gases could escape, causing burns to occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to brackets connecting the engine-mounted oil cooler lines not being properly screwed into their threads, the oil cooler hose may become loose or detach, causing engine oil to spill onto the road. This creates slippery sections, increasing the risk of accidents and injuries, especially for two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic used for the oil filter housing in some petrol and diesel engines can crack over time. This can cause oil leaks onto the engine and road. Leaked oil can ignite upon contact with hot engine parts, increasing the risk of a fire. Moreover, it can also create slippery sections, increasing the risk of accidents and injuries especially for two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
An oil leak from the turbocharger oil feed pipe could create a slippery section on the road, creating a risk of accident for motorcycles and other two-wheeled vehicles. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.