3 recalls and 0 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
Chrysler (FCA US LLC) is recalling certain 2024-2025 Jeep Wagoneer, 2024-2026 Jeep Grand Cherokee, Jeep Grand Cherokee L, Jeep Grand Cherokee 4XE, Jeep Grand Wagoneer, 2025 Jeep Wagoneer L, 2025-2026 Jeep Grand Wagoneer L, 2026 Jeep Cherokee, and Jeep Grand Wagoneer L PHEV vehicles. Due to a software error, the tire pressure monitoring system may fail to detect low tire pressure and/or fail to illuminate the tire pressure monitoring system (TPMS) warning light as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 138, "Tire Pressure Monitoring System."
Remedy: Dealers will update the radio frequency hub software, free of charge. Owner notification letters are expected to be mailed beginning September 29, 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 54D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on September 9, 2026.
Chrysler (FCA US, LLC) is recalling certain 2026 Jeep Wrangler, Jeep Gladiator, Jeep Compass, Jeep Cherokee, Jeep Grand Cherokee, Jeep Grand Cherokee L, Jeep Grand Wagoneer, Jeep Grand Wagoneer L, Ram Promaster, Ram Promaster EV, Ram 1500, Ram 2500, Chrysler Pacifica Plug-In Hybrid, Chrysler Voyager, and 2026-2027 Chrysler Pacifica and Dodge Charger vehicles. The rearview camera image may fail to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Remedy: Radio software will be updated by a dealer or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed beginning September 2, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 78D. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov on August 20, 2026.
Chrysler (FCA US, LLC) is recalling certain 2026 Jeep Grand Cherokee and Grand Cherokee L vehicles. Due to a software issue in the body control module (BCM), the windshield wipers may fail.
Remedy: Dealers will update the body control module (BCM) software, free of charge. Owner notification letters were mailed September 3, 2026. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is 77D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on August 20, 2026.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The steering column control module (SCCM) may have been built with an inadequate welded connection between the internal flexible cable (FFC) and the busbar. The faulty connection may not allow the signal from the occupant safety control (ORC) module to reach the driver's airbag module, preventing it from deploying. An airbag that fails to deploy as intended can increase the risk of injury to the driver in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The exhaust-gas recirculation (EGR) cooler can be susceptible to thermal fatigue. The exhaust gases can interact with air and other hydrocarbons in the system, which can cause combustion in the inlet manifold. This can lead the vehicle to catch fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
An incorrectly fitted rear coil spring may detach from the vehicle, which could affect vehicle handling and create a hazard for following traffic. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
An incorrectly fitted retaining ring in the Power Transfer Unit may cause an unexpected loss of traction and/or failure of the parking function, increasing the risk of an accident and injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The high-voltage battery pack can contain cells having separator damage. A damaged separator can lead to a very rapid chemical chain reaction in the battery. This can cause the battery to overheat, which can start a fire in the vehicle. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The separator of the high voltage battery may be damaged. This may lead to cell failure and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Second row seats may have missing welds between the seat back frame and the anchor of the child seat on one or both seats. As a result, the anchor can completely detach from the vehicle seat, increasing the risk of injury to the child seat occupant in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The steering column intermediate shaft can detach from the U-joint, causing the steering control to fail, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear coil springs may be defective and can become detached while the vehicle is in motion, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The upper control arm clamping screw may have been damaged during vehicle assembly. If it breaks, the clamping force between the control arm ball joint and the steering knuckle could be lost. This could cause the wheel to detach, creating a risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.