2019 BMW X6
4 recalls and 5 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN4 recalls and 5 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC. (BMW) is recalling certain 2015-2019 X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles equipped with rear seat lower anchor bars used in securing child restraint seats. The lower anchor bars may become damaged over time when used with an ISOFIX-type, rigid-style connector, child restraint system.
Remedy: BMW will notify owners, and dealers will weld a reinforcing bracket to the lower anchor bars and the vehicle body, free of charge. Owner notification began January 17, 2020. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018 540d, 2018-2020 530i, 530i xDrive, 540i, 540i xDrive, M550i xDrive, M5, 530e, 530e xDrive, X3 sDrive, X3 xDrive, X3 M40i, X3 M, and 2019-2020 X4 xDrive, X4 M40i, X4 M, X7 xDrive, X7 M50i, 740Li, 740Li xDrive, 750Li, 750Li xDrive, 8 Series Convertible and Coupe 840i, 840i xDrive, M850i xDrive, X5 sDrive, X5 xDrive, X5 M50i, X6 xDrive, X6 M50i, 330i, 330i xDrive, M340i, M340i xDrive, Z4 sDrive, Z4 M40i, 740Le xDrive and 745Le xDrive, 2018-2019 640i xDrive Gran Turismo and Rolls-Royce Phantom, 2019 M850i xDrive Gran Coupe and Rolls-Royce Cullinan and 2020 Toyota Supra vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."
Remedy: BMW will notify owners, and dealers will update the back-up camera software, free of charge. The recall began November 8, 2019. Owners may contact BMW customer service at 1-800-525-7417 or Rolls-Royce at 1-877-877-3735. Toyota owners may contact Toyota customer service at 1-888-270-9371.
BMW of North America, LLC (BMW) is recalling certain 2019 BMW X6 sDrive35i, X6 xDrive35i, X6 xDrive50i and X6M vehicles. The rear upper control arm pivot bolts may have been improperly hardened, possibly causing the rear upper control arms to break.
Remedy: All affected vehicles remain on dealer lots, therefore owner letters will not be mailed. BMW dealers will replace both rear upper control arms, free of charge. The recall began September 21, 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X6 sDrive35i, X6 xDrive35i, X6 xDrive50i, and X6M vehicles. The wheel bolts on these vehicles may not have been properly tightened.
Remedy: BMW will notify owners, and dealers will replace and tighten all of the wheel bolts, free of charge. The recall began November 1, 2018. Owners may contact BMW customer service at 1-800-525-7417.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
I was in an accident on the interstate 195 in New Bedford, MA. My car was pushed into the guardrail on the driver's side. The air bag in the the side of my seat deployed and ruptured releasing hot gases and burned me through my clothes. I received 1st and 2nd degree burns and was treated at a local hospital. The area that ruptured looked like it was where a patch and been sewn into the air bag. The car may be totaled and has not yet been inspected.
The exhaust pipes on my BMW X6 caused a severe burn to lower leg after I inadvertently touched the pipe when removing groceries from the rear hatch. The tip of the exhaust pipes extends out from the rear bumper approximately 1 inch. The exhaust pipes are located on both the right and left rear side of the vehicle. It appears as if the exhaust pipes are under the bumper when you’re standing over the pipes. No warning lights were visible on the dashboard indicating the exhaust pipes were hot. At this time it’s unknown if this vehicle has been inspected by BMW Inc. for exhaust burns.
While driving to the store my husband notice the vehicle began to over heat. After only driving less than 2 miles the vehicle was parked at my home, it suddenly burst into flames from the engine an hour later. Gratefully, no one was in the vehicle during the incident. We are a family of 5 so that would have been a disgrace. The vehicle was inspected by BMW who claim they can not find cause and deny responsibility. It is unfortunate, our insurance canceled for non-payment a short time before this. Therefore, we have no resource to make us whole again. The vehicle is being temporarily held at BMW of Coconut Creek as this is where it was purchased. Meanwhile, my husband continues to make payments to BMW Finance to protect his credit. Research has shown over hundreds of thousands of like make and models BMW x 6 have been recalled for the same incident from 2012 - 2018 and I can' t help but believe the 2019 should be placed on recall as well before someone is hurt. I can use any advise and guidance on my situation. As I am seeking legal counsel f or the damages.
The contact owns a 2019 BMW X6. While the contact's wife was driving at an undisclosed speed, the parking brake independently engaged. The contact's wife drove the vehicle to the shoulder of the road and turned off the vehicle. The contact stated that the parking brake malfunction warning light was illuminated. The contact's wife attempted to release the parking brake several times; however, after several attempts, the parking brake was released. The vehicle was taken to the dealer where it was diagnosed with parking brake actuator assembly unit failure. The contact was informed that the parking brake actuator assembly unit needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was filed. The contact was informed that the failure was not covered under recall. The failure mileage was approximately 99,912.
The contact owns a 2019 BMW X6. The contact stated that the vehicle was leaking oil. The check engine warning light was illuminated. The vehicle was taken to the local dealer where it was diagnosed the catalectic converter was missing and needed to be replaced. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was unknown.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.