2001 BMW X5
12 recalls and 176 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN12 recalls and 176 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
2 recalls carry a do-not-drive or park-outside warning. Check whether this vehicle was remedied before driving or storing it.
BMW of North America, LLC (BMW) is recalling certain 2000-2001 X5 vehicles that may be equipped with a sport steering wheel containing a Takata PSDI-4 air bag inflator. The inflator may explode during deployment due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature, and temperature cycling.
Remedy: Owners are advised not to drive their vehicles until the remedy is complete. Dealers will inspect and replace the driver's front air bag, as necessary, free of charge. Owner notification letters were mailed December 29, 2025. Owners may contact BMW customer service at 1-800-525-7417. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning December 23, 2025. This recall expands previous NHTSA recall number 19V015.
BMW of North America, LLC (BMW) is recalling certain 2000-2002 BMW 320i, 323i, 325i, 325xi, 330i, 330xi, 323Ci, 325Ci, 330Ci, M3, 323iT, 325iT and 325xiT vehicles, 2001-2002 525i, 530i, 540i, M5, 525iT and 540iT vehicles, and 2001-2003 X5 3.0i, X5 4.4i, and X5 4.6is vehicles. These vehicles may have had a driver-side air bag module installed as replacement equipment such as after a vehicle crash necessitating replacement of the original air bag, or as a remedy part for a prior recall. These replacement modules contain an air bag inflator that may rupture due to propellant degradation occurring after long-term exposure to lower absolute humidity, temperature and temperature cycling.
Remedy: Owners are advised not to drive their vehicles until the vehicle has been remedied. BMW will notify owners, and dealers will inspect the driver side air bag module, replacing it as necessary, free of charge. The recall began March 15, 2017. Owners may contact BMW customer service at 1-800-525-7417.
ON CERTAIN SPORT UTILITY VEHICLES, IT MAY BE POSSIBLE FOR THE FRONT BRAKE LINE TO SLIP OUT OF THE RETAINING BRACKET LOCATED AT THE FRONT STRUT. THE BRAKE HOSE THAT IS ATTACHED TO THE BRAKE LINE COULD COME IN CONTACT WITH THE TIRE AND BE SUBJECTED TO WEAR AND ABRASION.
Remedy: DEALERS WILL INSTALL AN ADDITIONAL RETAINING CLIP TO FURTHER SECURE THE BRAKE LINE TO THE FRONT STRUT. ADDITIONALLY, IF INSPECTION OF ANY BRAKE HOSE INDICATES THAT IT HAS EXPERIENCED DAMAGE, THE HOSE WILL BE REPLACED. OWNER NOTIFICATION BEGAN FEBRUARY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
ON CERTAIN PASSENGER VEHICLES, DUE TO A MANUFACTURING PROBLEM, THE BRAKE PEDAL ARM PIVOT SHAFT COULD LOOSEN FROM ITS SUPPORT BRACKET.
Remedy: DEALERS WILL CHECK THE BRAKE PEDAL ARM PIVOT SHAFT FOR PROPER SEATING IN ITS SUPPORT BRACKET. IN ADDITION, A PIN WILL BE INSTALLED TO SECURE THE SHAFT TO THE BRACKET. OWNER NOTIFICATION BEGAN AUGUST 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-332-4269.
ON CERTAIN PASSENGER VEHICLES, THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.
Remedy: DEALERS WILL REPLACE THE FAN. OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2001. THIS IS A SUPPLEMENT TO A RECALL THAT BEGAN DURING SEPTEMBER 2001 (SEE RECALL CAMPAIGN 01V206). OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.
Remedy: DEALERS WILL REPLACE THE FAN. OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. DUE TO AN ASSEMBLY ERROR, ONE OR BOTH SELF-LOCKING NUTS THAT SECURE THE PEDAL ASSEMBLY TO THE BOOSTER MAY HAVE BEEN CROSS-THREADED ON THE BOOSTER STUDS THAT PROTRUDE THROUGH THE FIREWALL. IN SUCH A CASE, THE NUT(S) WOULD NOT BE FULLY SEATED ON THE STUD(S).
Remedy: DEALERS WILL INSPECT THE TWO LOCK NUTS TO DETERMINE IF THEY ARE PROPERLY SEATED. IF THE NUTS ARE NOT PROPERLY SEATED OR ARE CROSS-THREADED, THE BRAKE BOOSTER WILL BE REPLACED. OWNER NOTIFICATION BEGAN AUGUST 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
VEHICLE DESCRIPTION: 4.4I SPORT UTILITY VEHICLES. OVER AN EXTENDED PERIOD OF TIME, ABRASION PARTICLES COULD DEPOSIT ON THE ELECTRICAL CONTACTS WITHIN THE SWITCH, CAUSING A DISRUPTION OF THE ELECTRIC CURRENT THROUGH THE CONTACTS. IF THE DISRUPTION OCCURS WHEN THE VEHICLE IS STATIONARY WITH THE TRANSMISSION IN THE NEUTRAL OR PARK POSITIONS, THE TRANSMISSION WILL SWITCH AUTOMATICALLY INTO THE EMERGENCY PROGRAM, WHICH IS DISPLAYED IN THE INSTRUMENT CLUSTER VIA A WARNING LAMP AND A MESSAGE, "TRANS. FAIL-SAFE PROG." IN THIS CASE, THE VEHICLE CAN BE DRIVEN IN LOWER GEARS ONLY WITH LIMITED ENGINE OUTPUT.
Remedy: DEALERS WILL REPLACE THE TRANSMISSION GEAR POSITION INDICATOR SWITCH. OWNER NOTIFICATION BEGAN AUGUST 14, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO AN ASSEMBLY ERROR DURING VEHICLE PRODUCTION, ANY OF THE THREE BOLTS THAT SECURE THE PULLEY TO THE PUMP MAY HAVE BEEN INADEQUATELY TIGHTENED.
Remedy: DEALERS WILL INSPECT THE POWER STEERING PUMP PULLEY TO SEE IF IT IS LOOSE. IF THE PULLEY IS NOT LOOSE ON THE PUMP, THE RETAINING BOLTS WILL BE TORQUED TO SPECIFICATION. IF THE PULLEY IS LOOSE, THE PUMP, PULLEY, ATTACHING BOLTS, AND DRIVE BELT WILL BE REPLACED. OWNER NOTIFICATION BEGAN AUGUST 17, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
VEHICLE DESCRIPTION: PASSENGER VEHICLES. DURING ASSEMBLY OF THESE VEHICLES, THE LOWER END OF THE SPINDLE MAY NOT HAVE BEEN INSERTED COMPLETELY INTO THE COUPLING. IN SUCH A CASE, THE FASTENING BOLT USED TO SECURE THE CONNECTION MAY NOT COMPLETELY ENGAGE THE SPINDLE WITHIN THE COUPLING. DURING DRIVING, IT WOULD BE POSSIBLE FOR THE SPINDLE TO DISCONNECT.
Remedy: DEALERS WILL INSPECT THE SPINDLE TO ENSURE PROPER INSERTION IN THE COUPLING, AND, IF NECESSARY, THE SPINDLE WILL BE FULLY INSERTED AND THE FASTENING BOLT REPLACED. OWNER NOTIFICATION BEGAN FEBRUARY 6, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE NUT THAT SECURES THE AXIAL JOINT OF THE LEFT STEERING TIE ROD TO THE STEERING GEAR BOX MAY HAVE NOT HAVE BEEN TIGHTENED SECURELY. THIS COULD LEAD TO LOOSENING OF THE NUT AND, INITIALLY TO STEERING WHEEL PLAY AND/OR MISALIGNMENT, AS WELL AS NOISE FROM THE STEERING LINKAGE. IF VEHICLE OPERATION CONTINUES, THE TIE ROD COULD DISCONNECT FROM THE STEERING GEAR BOX.
Remedy: DEALERS WILL INSPECT AND RE-TORQUE THE NUT SECURING THE AXIAL JOINT OF THE LEFT STEERING TIE ROD. IF THE TORQUE OF THE NUT IS FOUND TO BE LOOSE, THE RIGHT NUT WILL ALSO BE CHECKED AND CORRECTED IF NECESSARY, AND A FRONT WHEEL ALIGNMENT WILL BE PERFORMED.
VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE SAFETY BELT LOWER OUTBOARD ANCHORAGE BOLT ON THE DRIVER'S AND FRONT PASSENGER'S SEATS MAY NOT HAVE BEEN SECURED PROPERLY.
Remedy: DEALERS WILL INSPECT THE BOLTS AND CORRECT THE TORQUE IF NECESSARY.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
Water may come into contact with the starter relay and gradually cause corrosion. This could affect the electrical connection inside the relay and make the engine difficult to start. It may also result in a short circuit and could cause the starter to overheat leading to a fire when the vehicle is in motion or when it is parked with the ignition off. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or start. Contact points in the starter-generator could overheat and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The software-based overload protection function cannot sufficiently prevent the starter being overloaded in the event of repeated long start-up attempts. The starter may overheat or sparks may be produced as a result of an increased current flow. This increases the risk of a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an accident, leading to a reduction in the restraint effect, increasing the risk of injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The stated maximum load specified in the user manual is incorrect. This could cause users to overload the vehicle, potentially leading to damage to the car and an increased risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk of injury to the frontpassenger. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a manufacturing error, the weld seam of the integrated transmission control unit (ITCU) may not have been correctly executed. As a result, transmission oil could leak into the ITCU, causing it to fail. This may lead to transmission seizure, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
TL* THE CONTACT OWNS A 2001 BMW X5. WHILE THE VEHICLE WAS PARKED, THE FRONT PASSENGER SIDE AIR BAG INFLATED ON ITS OWN WITHOUT WARNING. THE DRIVER AND PASSENGER WERE INJURED, BUT DID NOT RECEIVE MEDICAL ATTENTION. A POLICE REPORT WAS NOT FILED. THE VEHICLE WAS DRIVEN TO THE DEALER WHERE IT WAS DIAGNOSED THAT THE AIR BAGS MALFUNCTIONED. THE CAUSE OF THE FAILURE WAS NOT DETERMINED. THE MANUFACTURER WAS NOTIFIED. THE VEHICLE WAS NOT REPAIRED. THE APPROXIMATE FAILURE MILEAGE WAS 150,000.
VEHICLE EXPERIENCED UNEXPECTED ACCELERATION. CAUSING THE VEHICLE TO ACCELERATE LIKE A ROCKET. CONSUMER SUSTAINED BURNS VEHICLE CRASHED INTO WALL. *AK THE CONSUMER RECEIVED BURNS ON RIGHT FROM BLACK POWDER UNKNOWN FROM WHERE IT ORIGINATED FROM. HAND WAS NEAR THE CRUISE CONTROL. *TC
FAILURE OF DRIVER SEAT HEATING MECHANISM. HOLE BURNED IN BOTTOM SEAT CUSHION AND BURN TO OCCUPANT'S (ME) LEG. THIS APPEARS TO BE DUE TO A SHORT OR BREAK IN THE HEATING ELEMENT. ON-LINE RESEARCH I'VE DONE INDICATES THIS IS A WIDESPREAD PROBLEM WITH THIS VEHICLE. *TR
TL* TAKATA RECALL. THE CONTACT OWNED A 2001 BMW X5. THE CONTACT STATED THAT WHILE DRIVING AT 25 MPH, A COYOTE JUMPED IN FRONT OF THE VEHICLE. THE CONTACT ATTEMPTED TO VOID A CRASH AND SWERVED CAUSING AN UNKNOWN REAR WHEEL TO DETACH FROM THE VEHICLE. THE VEHICLE THEN FLIPPED OVER SEVERAL TIMES AND CRASHED UPSIDE DOWN INTO THE SIDE OF A RESIDENTIAL HOME. A POLICE REPORT WAS NOT FILED. THE AIR BAGS FAILED TO DEPLOY. THE SEAT BELT FAILED TO RESTRAIN THE CONTACT WHO WAS EJECTED FROM THE VEHICLE WHEN THE IMPACT OCCURRED. THE CONTACT SUSTAINED INTERNAL BRUISING THAT REQUIRED MEDICAL ATTENTION. THE VEHICLE WAS TOWED TO A COLLISION CENTER BUT WAS NOT DIAGNOSED. THE VEHICLE WAS LATER TOWED TO THE CONTACTS RESIDENCE. THE VEHICLE WAS DESTROYED. THE CONTACT LATER RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 17V047000 (AIR BAGS). THE FAILURE MILEAGE WAS NOT AVAILABLE. PARTS DISTRIBUTION DISCONNECT.
TL* THE CONTACT OWNS A 2001 BMW X5. THE CONTACT STATED THAT WHILE DRIVING APPROXIMATELY 5 MPH, THE VEHICLE SURGED FORWARD UNTIL CRASHING INTO A HOUSE. THE CONTACT WAS TAKEN TO THE HOSPITAL TO TREAT INJURIES. THE VEHICLE WAS IN THE PROCESS OF BEING TAKEN TO AN AUTHORIZED DEALER TO HAVE THE FAILURE DIAGNOSED. THE CONTACT ALSO STATED THAT THE VEHICLE HAD BEEN EXPERIENCING THE FAILURE ON AN INTERMITTENT BASIS FOR THE PAST TWO YEARS, IN WHICH THE VEHICLE WOULD MOMENTARILY SURGE FORWARD WHILE DRIVING AT VARIOUS SPEEDS. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE AND CURRENT MILEAGES WERE 75,000.
TL* THE CONTACT OWNS A 2001 BMW X5. THE CONTACT STATED THAT THE AIR BAGS DEPLOYED WITHOUT WARNING OR IMPACT. THE VEHICLE WAS NOT TAKEN TO A DEALER FOR REPAIRS. THE CONTACT SUSTAINED MINOR INJURIES, WHICH DID NOT REQUIRE MEDICAL ATTENTION. THE MANUFACTURER WAS NOT NOTIFIED. THE VIN WAS UNKNOWN. THE APPROXIMATE FAILURE MILEAGE WAS 160,000.
MY PASSENGER SIDE AIRBAG DEPLOYED WITHOUT AN ACCIDENT OCCURRING. I CONTACTED BMWS CORPORATE OFFICES. THEY HAD ME TAKE IT IN TO BMW OF DALLAS SO THEY COULD SEE WHAT CAUSED THE MALFUNCTION. NO SATISFACTORY RESOLVE WAS ACHIEVED. THEY DID NOT FIX THE MALFUNCTIONED EQUIPMENT. THEY GAVE ME MY VEHICLE BACK WITH MALFUNCTIONED AIRBAG UNFIXED. I AM APPALLED BY THERE LACK OF CORPORATE ACCOUNTABILITY. *BF CONSUMER STATED SHE HAD A HEAD TRAUMA. UPDATED 7/3/18*JB *TR
THE CONSUMER PARKED AND TURN THE VEHICLE OFF. AFTER EXITING THE VEHICLE THE CONSUMER TURNED AROUND AND NOTICED SMOKING COMING FROM THE STEERING WHEEL. THE CONSUMER THEN RE-ENTER THE VEHICLE AND THE DRIVER'S SIDE AIR BAG DEPLOYED. THIS RESULTED IN THE CONSUMER HAVING A CONTUSION, EYE ABRASION AND 2 DISC IN THEIR NECK. *MR
THE NEW BMW X5 HAS DANGEROUSLY DESIGNED FRONT DOORS. THE JAMB OF THE DOOR SWEEPS BACK TO A VERY SHARP METAL POINT. WHEN YOU OPEN OR CLOSE THE DOOR, THE TOP CAN STRIKE YOU IN THE HEAD CAUSING INJURY. THIS IS BECAUSE WHEN YOU GRAB THE HANDLE, YOU DON'T REALIZE THAT THE TOP SWEEPS FURTHER BACK NEARER YOUR HEAD. I HAD POKED MY EYELID ON AUGUST 14TH AND CALLED BMW. I NOW HAVE SEVERELY INJURED MY EAR, GETTING 11 STICHES. I CALLED BMW ON 10/13/00 TO FILE ANOTHER REPORT. IF ONE IS SIX FEET TALL, THIS CAR WILL INJURE THEM.
THE NEW BMW X5 HAS DANGEROUSLY DESIGNED FRONT DOORS. THE JAMB OF THE DOOR SWEEPS BACK TO A VERY SHARP METAL POINT. WHEN YOU OPEN OR CLOSE THE DOOR, THE TOP CAN STRIKE YOU IN THE HEAD CAUSING INJURY. THIS IS BECAUSE WHEN YOU GRAB THE HANDLE, YOU DON'T REALIZE THAT THE TOP SWEEPS FURTHER BACK NEARER YOUR HEAD. I HAD POKED MY EYELID ON AUGUST 14TH AND CALLED BMW. I NOW HAVE SEVERELY INJURED MY EAR, GETTING 11 STICHES. I CALLED BMW ON 10/13/00 TO FILE ANOTHER REPORT. IF ONE IS SIX FEET TALL, THIS CAR WILL INJURE THEM.*AK
THE BRAND NEW X5 HAS DANGEROUSLY DESIGNED FRONT DOORS. THE JAMB OF THE DOOR SWEEPS BACK TO A VERY SHARP METAL POINT. WHEN YOU OPEN OR CLOSE THE DOOR, THE TOP CAN STRIKE YOU IN THE HEAD CAUSING INJURY. THIS IS BECAUSE WHEN YOU GRAB THE HANDLE YOU DON'T REALIZE THAT THE TOP SWEEPS FURTHER BACK NEAR YOUR HEAD. I HAD POKED MY EYELID ON AUGUST 14TH AND CALLED BMW. I NOW HAVE SEVERELY INJURED MY EAR. GETTING 11 STICHES. I CALLED BMW ON 10/13/00 TO FILE ANOTHER REPORT. IF ONE IS SIX FEET TALL, THIS CAR WILL INJURE THEM. *AK *NLM **DIMSII IVOQ ENTRY POSTED AFTER 12/12/02 CUT-OVER TO ARTEMIS*734326
IT CAUGHT ON FIRE WHILE IT WAS PARKED ENGINE WAS ALSO OFF!
TAKATA RECALL I WENT OUT TO START MY CAR NOTICED WHEN I STARTED IT THERE WAS SMOKE COMING FROM THE PASSENGER SIDE FRONT AIR BAG AREA I IMMEDIATELY SHUT IT OFF BUT THERE WAS SMOKE STILL COMING AND GETTING THICKER I IMMEDIATELY CALL 911 I WAS ON THE PHONE WITH 911 AND NOTICED FLAMES .FIRE TRUCK SHOWED UP PUT THE FIRE OUT BUT THE WHOLE FRONT AIR BAG AREA AND GLOVE BOX WAS PRETTY BAD
2001 BMW X5 4.4I CAUGHT FIRE IN THE ENGINE COMPARTMENT WHILE PARKED IN A SHOPPING CENTER PARKING LOT.
04/30/16 I BOUGHT THE SUV LAS MONTH AND HAVE EVERY THING ORIGINAL EVERY THING WAS FINE UNTIL TODAY IT CAUGHT ON FIRE ON THE PASENGER SIDE UNDER THE GLOVE COMPARTMENT A 30 MIN AFTER PARKING IT ON THE DRIVE WAY I HEAR THE ALARM AND SAW ALOT OF SMOG COMING FROM THE TRUCK AT SOON AS I OPEN THE DOOR.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.