2019 BMW X2
1 recall and 3 owner complaints on record for this model year.
Check a specific vehicle
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VIN1 recall and 3 owner complaints on record for this model year.
This page describes the model. To see how one particular car is equipped, and whether its identifier is valid, decode its VIN.
Decode a VINAlmost all of this describes the model year, not the individual car. Nothing here can tell you about this vehicle’s mileage, accidents or ownership — no identifier encodes those.
BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X1 sDrive28i, X1 xDrive28i, 2019 X2 xDrive28i, MINI Cooper S Convertible, Countryman, and John Cooper Works Countryman vehicles. The steering gear tie rod may have been assembled incorrectly, which may result in excessive wear of the tie rod end, eventually causing it to break.
Remedy: BMW will notify owners, and dealers will inspect the vehicles and replace the tie rods and ball joints as necessary, free of charge. The recall began October 11, 2019. Owners may contact BMW customer service at 1-800-525-7417 or MINI customer service at 1-866-825-1525.
Published by model year, not by VIN — may not apply to this vehicle, or may already have been done. Confirm with a dealer.
The seatbelts in the second row may not have been manufactured correctly and could cause the car-sensitivity sensors to fail. This could reduce the protective effect of the seatbelts and lead to injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat belts of the car were not manufactured correctly. In the event of a collision or accident, the restraint function of the seat belts may be reduced and may not provide the necessary protection. As a result, there may be an increased risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seat recliner adjuster may not be correctly welded, which could cause the backrest not to lock. If it doesn't lock, the seatback might not stay secure in a collision, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Matched on brand and model name — Safety Gate publishes no VIN. Check the production dates, and quote the recall code to a dealer.
On 6/12/2024, my right engine mounts collapsed and needed immediate repair to keep the engine secure. On 7/6/2026, I took my car for service and was informed via video that the right engine mounts had collapsed again and required replacement. I repeatedly explained to the dealership that the mount installed on 6/12/2024 only lasted about 27,000 miles. The service center then had a team leader take a look and said to disregard what the video shows of a collapsed mount; that it's only cracking and that can wait. The dealership refused to cover the cost of the mounts, instead charging me a discounted rate, claiming that the warranty was only for two years, despite my car not providing any service notifications. It appears that engine mount issues are a common and serious problem on BMWs.
My battery died. After a AAA jump, the car started fine but the right-rear-taillight-signal malfunctioned. It was working fine prior to the battery dying. I purchased a new battery and the mechanic said my right-rear-taillight was getting an electrical signal and the bulb work, but I needed a completely new taillight component ($300!) because it still was not working. While researching parts, I came across a YouTube 'fix' that showed that within the lightbulb compartment, there was a little piece of plastic that was MELTED preventing a mental piece on the lightbulb casing from touching the metal on the compartment preventing the light from coming on. My mechanic sanded down the melted plastic so the two metal parts could touch, and low and behold, the right-rear-taillight-signal worked just fine. Now I don't know if a battery failure could cause an electrical shock to this little piece of plastic but in the comments on this Youtube "fix", this same scenario happed to someone else with an X2 and their battery died and the right-rear-taillight-signal immediately failed. Is there a connection? What caused that little piece to melt??
THE M35I TURBO MALFUNCTIONS AND RESULTS IN A 1-3 SECOND LAG THAT PRODUCES A VERY DANGEROUS DRIVING SITUATION. YOU PRESS THE ACCELERATOR AND THE CAR DOESN'T MOVE FOR A FEW SECONDS THEN ALL OF A SUDDEN IT BURSTS AHEAD EXPLOSIVELY.
Filed by owners of this model year and unverified by NHTSA — one person’s account, not an established fact.