4 Rückrufe und 0 Halterbeschwerden für dieses Modelljahr erfasst.
Diese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsselnFast alles hiervon beschreibt das Modelljahr, nicht das einzelne Fahrzeug. Nichts davon sagt etwas über Laufleistung, Unfälle oder Eigentum dieses Autos — keine Kennung kodiert das.
1 Rückruf enthält eine Fahrverbots- oder Abstellwarnung. Prüfen Sie, ob dieses Fahrzeug bereits instand gesetzt wurde, bevor Sie es fahren oder abstellen.
Ford Motor Company (Ford) is recalling certain 2025 Transit vehicles. The brake pedal may disconnect from the brake booster pushrod, causing a loss of brake function. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 105, "Hydraulic and Electric Brake Systems."
Abhilfe: Owners are advised not to drive their vehicles until the remedy has been completed. Dealers will inspect and repair the brake booster assembly as necessary, free of charge. Owner notification letters were mailed February 24, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26C07. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 18, 2026.
Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model year information. The retractors may not lock, preventing the wheelchair from being properly secured.
Abhilfe: Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
Ford Motor Company (Ford) is recalling certain 2025 Transit, F-150, and Explorer vehicles. The connecting rod and rod bearing components may have manufacturing defects that can lead to engine damage and engine failure.
Abhilfe: Dealers will inspect the connecting rods and replace the engine long block assembly as necessary, free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S55.
Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.
Abhilfe: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.
Nach Modelljahr veröffentlicht, nicht nach FIN — betrifft dieses Fahrzeug möglicherweise nicht oder wurde bereits erledigt. Beim Händler bestätigen.
The rear brake pipe may not be properly secured, which could lead to a loss of brake fluid and potential failure of the brake circuit. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear shock absorbers could break and impair driving stability, which could damage the rear brake line and/or cause a release of the coil spring. This increases the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A bent anode plate on the high-voltage battery cells could lead to a short circuit, consequently leading to engine failure and the shutdown of the battery, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The reversing camera may freeze giving the false impression that the area behind the vehicle is clear, despite the presence of people or obstacles there. This may increase the risk of accident and injury. In addition, warning messages such as parking sensor failure and emergency calls can be displayed in the instrument cluster during operation. Systems controlled via the centre screen, such as heating, seat heating and ventilation, may also be inoperable. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A wiring harness comes into contact with the brake lines. This may lead to wear, corrosion and a leak in the brake lines and to reduced braking performance, which may lead to an increased risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
One or more bolts on the bottom cover of the power distribution board can break and may lead to various electrical malfunctions. This can lead to the vehicle catching fire due to an increased resistance. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Some seat screws may not be properly tightened, leading the seat to become loose. This can make the restraining devices less effective, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The fuel line may chafe against surrounding components and develop a leak. Fuel leaking onto hot components in the engine compartment may ignite and cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A front suspension bolt may have been overtightened during manufacturing, weakening it over time. If the bolt breaks, steering control and braking performance may be reduced, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The handbrake may slip, causing a complete loss of holding power. This could allow the vehicle to roll away unintentionally, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A contact between the coupling nut of the brake line and the fuel tank may cause a leak in one of the brake lines. This can lead the fuel tank to become damaged and fuel to leak, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Insufficient distance between the wiring harness and the transmission housing may result in damage to cables. The power-assisted steering may fail. There is a risk of fire due to short circuits and a risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear axle may not be sufficiently lubricated, leading to a malfunction of the wheel bearings which can cause the rear wheels to lock. This can provoke a loss of vehicle's control, increasing the risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Gas may be released from the 12V battery into the vehicle cabin area. Inhalation of the released gas may cause adverse health effects to the cabin occupants and cause an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The bolts on the rear brake drums are not tightened to the specified torque. This may cause brake fluid leakage and/or brake or wheel jamming, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Leakage from the fuel rail may cause fuel to be released, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A faulty part within the high-voltage battery cells could cause the battery to short-circuit and cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Improper cleaning of the components during primer application can leave contaminants like silicone, which weakens the adhesion of the glass roof plate. This may cause wind noise, water leaks, and potential detachment of the roof from the vehicle, increasing the risk of accidents and injuries to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The braking system may have been contaminated with mineral oil. This can lead to the swelling of rubber components in the braking system (hydraulic seals, brake hoses, etc.) causing the braking system to lack hydraulic pressure. This can result in longer brake pedal travel and reduced braking performance, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicles have been manufactured with a trailer coupling assembly that cannot withstand the declared towable mass. This can lead the trailer to separate from the towing vehicle, which creates serious risk of accidents and injuries to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cabling of the steering column may have an error, that can lead to a short circuit and thereby to a loss of power in the vehicle. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abgeglichen über Marke und Modellname — Safety Gate veröffentlicht keine FIN. Prüfen Sie die Produktionsdaten und nennen Sie dem Händler den Rückrufcode.