8 Rückrufe und 51 Halterbeschwerden für dieses Modelljahr erfasst.
Diese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsselnFast alles hiervon beschreibt das Modelljahr, nicht das einzelne Fahrzeug. Nichts davon sagt etwas über Laufleistung, Unfälle oder Eigentum dieses Autos — keine Kennung kodiert das.
On May 17 2022, I was involved in a multi vehicle accident in which my vehicle was hit on the side and ended up with a right frontal impact into a concrete barrier. Despite the severity of the impact, None of the airbags deployed. The onboard collision sensor was triggered and dialed 911. I was injured, but not to a catastrophic Degree. I have cuts and bruises as would be expected. My concern is that an airbag should have deployed and would have been beneficial in this instance, since My shoulder did impact the steering wheel. There is a recall for this particular vehicle, but my VIN Is not listed and should be.
Our employee was on a job site, parked and exited the vehicle and it rolled into a fence causing damage to the hood, fender and headlight. There was no warning chime that the vehicle was not in park. No one was in the vehicle at the time and no one was injured. Because there were no injuries, we did not make an insurance claim for the damage nor file a police report. This happened approximately three months after we purchased this vehicle. I believe this vehicle should be included in the current Ford recall 21S24. I have contacted both the dealership and Ford Motor Company and they say there is nothing to be done unless/until NHTSA adds our VIN/batch to the current recall.
Since I’ve bought it at 48,000 miles the van has always had hard engagements on 1 gear and 2nd. I knew the transmission was bad a week after I bought it at the ford dealership. All they did under their limited warranty was a transmission flush. Now it has 70,000 and the torque converter is toast now. I was on the interstate going 70mph. Let off the gas and a huge aggressive deceleration happened and I almost lost control. It is constant issue now when going over 70mph. Took it to ford, no transmission codes so they didn’t try fix it or find anything wrong. Noticing high rpms trying to get up to speed. Torque converter is clearly slipping.
Description of Defect: When the vehicle is shifted into reverse, the rearview camera display freezes for several seconds before going black. This malfunction creates a direct and serious safety hazard — during the period the display is frozen, the image shown does not reflect actual real-time conditions behind the vehicle. Any pedestrian, child, or object that moves into the path of the vehicle after the display freezes will not be visible to the driver. This significantly increases the risk of a backover collision. Dealership Inspection Outcome: I brought the vehicle to an authorized Ford dealership for diagnosis. Upon inspection, the technician was unable to detect the diagnostic trouble code associated with Recall 25S89, and as a result, the vehicle was deemed to have passed inspection. However, the malfunction continues to occur. The failure to trigger the recall code does not resolve the underlying issue — the camera display still freezes and blacks out during reverse operation, leaving the driver without a functioning rearview safety system. Safety Concern: A rearview camera is a federally mandated safety feature. A display that intermittently freezes and then goes dark is functionally equivalent to having no camera at all during those critical moments. This is not a minor inconvenience — it is a safety system failure that puts pedestrians and other individuals behind the vehicle at risk every time the vehicle is put in reverse. Requested Action: I am requesting that NHTSA investigate whether Recall 25S89 adequately captures all failure modes associated with this defect, and whether vehicles that present with this symptom but do not trigger the associated diagnostic code are being improperly cleared at dealerships. A remedy should be identified and applied to all affected vehicles regardless of whether the recall code is detected during inspection.
The vehicle has only been driven for 24K miles and there was an issue with the ABS Hydraulic Control Unit (HCU) and the recommendation is for it to be completely replaced. Seems ridiculous if the ABS Hydralic Control Unit is meant to last 100k-200k miles.
While traveling on the freeway after approximately 45 minutes of driving at 65 mph, the car suddenly felt like it was down shifting causing it to slow substantially. When I tried to accelerate to avoid cars behind me from hitting me, the car prevented me from speeding up for approximately five seconds. RPM is over 5000 b4 it allowed speed up. This happened on two separate occasions,. The car would not start after the second trip and was towed to a Ford dealer for repair. I was told I needed a new alternator and battery and what I experienced on the freeway was the alternator impacting the transmission. I picked up what I thought was a repaired vehicle, traveled to one of the same places I had gone previously and approximately 45 minutes into my drive, the same event took place with the car. Slowing severely and not allowing me to accelerate to return to freeway speed for approximately five seconds. It was taken back for repairs shortly thereafter. I was told it wasn't the transmission. It was a sensor in the brake system that causes the brakes to be applied just enough to create friction that heats up two of the wheels to such a high temp., the brake pads melted onto the rotors. The master cylinder, pads, rotors, sensors all needed replacement. The car is a 2019, purchased new, out of warranty with only 26,000 miles. Ford has offered to pay part of the repairs but expects me to pay the other portion. This car has been well cared for. Nothing I have done while driving it has caused their sensor to create such a dangerous situation on the freeway. It also started happening before it was driven to the dealership by refusing to move for five seconds every time the car came to a stop. I have read other accounts of the same situation happening to people who own the same model and year. This is a dangerous situation created by Ford's faulty equipment. The car is at Ford dealership waiting to be repaired for the 2nd time.
Transmission failure after all known transmission recalls were repaired.
Safety Recall issued April 2024 for Panoramic Glass. Ford dealerships are unable to repair due to glass companies refusing to assist. This issue has been taken to all dealerships on the island, with the same results. Calling Ford recall (4 times) has finally prompted an open case and claim number #XXX INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
My van began with the brake sticking and it was not only the brake (with my van with only 34,000 miles on it) 2019 year, so I took it to Les Schwab to find out that it was a known default of the years of my van 2012 to 2019 that there have been countless replacement of the defect ABS Pump (costing me 2,000.00 to fix), and finding out that this same problem was where the did a recall on the 2016 Ford Transconnect Vans, but didn't honor other years even though it has been a known issue is many. This should have been a recall for my 2019, I barely even drive it.
Transmission failure at 80,000 miles. This a known issue with 8F35 transmissions in these model years. Left me stranded and in danger on the roadway. The transmission has other recalls, and a TSB from Ford acknowledging the issues without recall for known failures. There were no lamps, indicators, or codes before failure.
The right front (passenger side) brake caliper seize closed, pulling the vehicle to the right from uneven braking, and destroying the brake pads and rotor on that corner. Fortunately, this occurred on dry asphalt highway, and control was not entirely lost. The problem was diagnosed by the dealer to be the ABS module. This appears to be a common fault on the Transit Connect van and the Ford Focus Sedan/coupe, which shares the same general platform. This particular van is a 2019 model year, and was purchased new in August of 2020. It had 27,272 miles on it when the module failed in September of 2025, five years. The car’s bumper to bumper warranty expired after three years. The repair cost from the dealership, including consequential repairs to the pads, rotor and fluid, totaled $2,813.65. While there was no actual crash, the affected rotor became heated to a bright orange color.
Jerks when accelerating, loses power, hesitates backing up, brake on left front does not release and overheats, right back brake following suit. Took into repair shop for brake service. Quote the inspection "Front passenger caliper seized no flow from house caused caliper to lock up." Was advised after rear right brake was found to be developing the same symptoms to have it towed to dealership for further inspection--risk of brake failure increasing likelihood of crash was cited as reasoning to default to dealership and no longer drive the vehicle.
Transmission shutter goes in and out of gear I’ve seen lots of people have this problem and no recall yet
The contact owns a 2019 Ford Transit Connect. The contact received notification of NHTSA Campaign Number: 25V572000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure.
Good evening, I wanted to bring to your attention an ongoing issue I've experienced with two 2019 Transit Connect vehicles that I purchased together. Both vehicles have encountered a transmission problem when shifting into reverse; initially, they would not move, but after shifting to park and then back to reverse, they would engage. I visited the dealership where I bought both vehicles, and they inspected them, indicating that they found no problems. However, both vehicles began showing transmission issues around the 50,000 to 58,000-mile mark. I was able to replace the transmissions under the manufacturer’s warranty. Unfortunately, after approximately 30,000 miles—about a year and a half later—I encountered the same issue again. Once more, the vehicles struggled to engage in reverse. When I returned to the dealership to report this recurring issue, I learned that my warranty had expired, and I would need to replace the transmission again. I would like to formally express my concerns regarding this situation. It seems that there may be a common issue with the transmission in the 2019 model, and I believe it's important for this to be addressed. Thank you for your attention to this matter.
Von Haltern dieses Modelljahrs eingereicht und von der NHTSA nicht geprüft — die Schilderung einer Person, keine feststehende Tatsache.
The rear brake pipe may not be properly secured, which could lead to a loss of brake fluid and potential failure of the brake circuit. This increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The reversing camera may freeze giving the false impression that the area behind the vehicle is clear, despite the presence of people or obstacles there. This may increase the risk of accident and injury. In addition, warning messages such as parking sensor failure and emergency calls can be displayed in the instrument cluster during operation. Systems controlled via the centre screen, such as heating, seat heating and ventilation, may also be inoperable. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A front suspension bolt may have been overtightened during manufacturing, weakening it over time. If the bolt breaks, steering control and braking performance may be reduced, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Insufficient distance between the wiring harness and the transmission housing may result in damage to cables. The power-assisted steering may fail. There is a risk of fire due to short circuits and a risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rear axle may not be sufficiently lubricated, leading to a malfunction of the wheel bearings which can cause the rear wheels to lock. This can provoke a loss of vehicle's control, increasing the risk of accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Improper cleaning of the components during primer application can leave contaminants like silicone, which weakens the adhesion of the glass roof plate. This may cause wind noise, water leaks, and potential detachment of the roof from the vehicle, increasing the risk of accidents and injuries to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicles have been manufactured with a trailer coupling assembly that cannot withstand the declared towable mass. This can lead the trailer to separate from the towing vehicle, which creates serious risk of accidents and injuries to other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abgeglichen über Marke und Modellname — Safety Gate veröffentlicht keine FIN. Prüfen Sie die Produktionsdaten und nennen Sie dem Händler den Rückrufcode.
Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, MKX, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has ended.
Abhilfe: Dealers will update the rearview camera software, free of charge. Owner notification letters were mailed September 4, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S72.
Ford Motor Company (Ford) is recalling certain 2019-2020 Transit Connect vehicles previously repaired incorrectly under recall number 20V-636. The powertrain control module (PCM) software has fail-safe temperature threshold values higher than intended for the engine. This may delay engine cooling and result in engine overheating.
Abhilfe: Dealers will update the powertrain control module (PCM) software, free of charge. Owner notification letters were mailed April 21, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S32.
Ford Motor Company (Ford) is recalling certain 2017-2019 Transit Connect vehicles. An improper bond may exist between the panoramic roof and the vehicle body, which can result in the panel detaching from the vehicle.
Abhilfe: Dealers will remove, clean, and reinstall the panoramic roof panel, free of charge. Owner notification letters were mailed June 4, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S29.
Ford Motor Company (Ford) is recalling certain 2013-2019 Escape, 2013-2018 C-Max, 2013-2016 Fusion, 2013-2021 Transit Connect, and 2015-2018 Edge vehicles. The bushing that attaches the shifter cable to the transmission may degrade or detach.
Abhilfe: Dealers will replace the under hood shift bushing and add a protective cap over the shift cable bushing, free of charge. Interim owner notification letters, informing owners of the safety risk, were mailed July 1, 2022. Remedy parts are expected to be available in 4th Quarter 2022. Owner notification letters were mailed October 27, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S43.
Ford Motor Company (Ford) is recalling certain 2013-2021 Transit Connect vehicles equipped with 2.5L engines. The bushing that attaches the shifter cable to the transmission may degrade or detach.
Abhilfe: Dealers will replace the underhood shifter cable bushing, and add a protective cap, free of charge. Owner notification letters were mailed on June 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S24.
Ford Motor Company (Ford) is recalling certain 2020 EcoSport and 2019-2020 Transit Connect vehicles. Depending on the model, either the driver side or passenger side frontal air bag modules are missing the first-stage booster propellant and sleeve. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."
Abhilfe: Ford will notify owners, and dealers will replace the affected air bag module on either the driver or passenger side, free of charge. This recall began February 18, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20C26.
Ford Motor Company (Ford) is recalling certain 2019-2020 Transit Connect vehicles equipped with 2.5L engines. The powertrain control module (PCM) software has fail-safe temperature threshold values higher than intended for the engine. This may delay the fail-safe cooling strategy in the event of coolant loss and result in engine overheating.
Abhilfe: Ford will notify owners, and dealers will update the PCM software, free of charge. The recall began November 10, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S60.
Ford Motor Company (Ford) is recalling certain 2019-2020 Edge, Transit Connect and Lincoln MKX and 2020 Escape and Lincoln Corsair vehicles. The start/stop accumulator endcap may have missing or loose bolts.
Abhilfe: Ford will notify owners, and dealers will replace the start/stop accumulator, free of charge. The recall began September 23, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S49.
Nach Modelljahr veröffentlicht, nicht nach FIN — betrifft dieses Fahrzeug möglicherweise nicht oder wurde bereits erledigt. Beim Händler bestätigen.