2014 Audi Q5
Ein bestimmtes Fahrzeug prüfen
Diese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsselnDiese Seite beschreibt das Modell. Um zu sehen, wie ein einzelnes Fahrzeug ausgestattet ist und ob seine Kennung gültig ist, entschlüsseln Sie die FIN.
FIN entschlüsseln5 Rückrufe und 106 Halterbeschwerden für dieses Modelljahr erfasst.
Fast alles hiervon beschreibt das Modelljahr, nicht das einzelne Fahrzeug. Nichts davon sagt etwas über Laufleistung, Unfälle oder Eigentum dieses Autos — keine Kennung kodiert das.
TL* THE CONTACT OWNED A 2014 AUDI Q5. THE CONTACT STATED THAT THE VEHICLE WAS STRUCK BY ANOTHER VEHICLE ON THE REAR PASSENGER SIDE BUMPER. THE CONTACT'S VEHICLE ROLLED OVER SEVERAL TIMES AND THE AIR BAGS FAILED TO DEPLOY. THE CONTACT AND FRONT PASSENGER WERE INJURED AND TRANSPORTED TO THE HOSPITAL. THE DRIVER OF THE OTHER VEHICLE WAS ALSO INJURED, BUT IS WAS UNKNOWN IF MEDICAL ATTENTION WAS RECEIVED. A POLICE REPORT WAS FILED. THE VEHICLE WAS DESTROYED AND TOWED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE DEALER WAS NOT NOTIFIED. THE FAILURE MILEAGE WAS 41,296. *TT
I APPROACH A CITY INTERSECTION AT THE FORT LAUDERDALE AIRPORT AND HAD NO BRAKES, STEERING, OR ACCELERATOR CONTROL. THE VEHICLE WAS COMPLETELY UNRESPONSIVE. I FLEW THROUGH THE INSPECTION HITTING THE CURB AND LAUNCHING MY VEHICLE APPROXIMATELY 50' OF DISTANCE OVER A DRAINAGE DITCH SLAMMING TO A COMPLETE STOP ON THE OTHER SIDE. THE SPEED WAS AT LEAST 40-50MPH AT THAT MOMENT, MAYBE FASTER SINCE THE VEHICLE JUST ACCELERATED BUT WOULD NOT BRAKE OR STEER. I HAD MY SEATBELT FASTENED AND AIRBAGS WERE DEPLOYED. THE VEHICLE WAS TOTALED AND THE FRAME LITERALLY SHATTERED ON IMPACT. I SUSTAINED SERIOUS TRAUMA TO MY FACE AND BACK AND ANKLES.
Seatbelt tensioner and air bags failed to deploy when the vehicles was in a severe frontal collision when another vehicle ran a stop sign exiting the highway.
THE VEHICLE WAS IN MOTION ON A HIGHWAY WITH MY PANORAMIC MOONROOF OPEN COMPLETELY. I WAS TRAVELING IN A SAFE SPEED, NO SPEED BUMPS OR POT HOLES, NO UNDERPASSES, AND NO TRAFFIC WHEN SUDDENLY MY MOONROOF GLASS POPPED AND SHATTERED EVERYWHERE. NEXT THING I KNOW, I AM GETTING A FACE FULL OF GLASS AND MY ENTIRE BACK SEAT IS COVERED IN GLASS. I HAVE SUSTAINED MICRO SCRATCHES FROM THE BROKEN GLASS ALL OVER MY CAR AND IT WAS UNDRIVEABLE AS I FEARED ALL THE GLASS CONTINUING TO FLY IN MY FACE. THANK GOD I WAS ALONE. I HAVE DONE MY RESEARCH AND REALIZED THAT THIS IS A RECOGNIZABLE SAFETY CONCERN WITH MY VEHICLE MAKE AND MODEL AROUND THE WORLD, BUT AUDI WILL NOT RECOGNIZE AS A SAFETY RECALL ISSUE. I'M JUST GLAD MY MOONROOF WAS NOT CLOSED AND ABOVE MY HEAD AS I PROBABLY COULD HAVE BEEN BADLY CUT AND THANK GOD I HAD NO PASSENGERS LIKE I NORMALLY DO AND PREVENTED THOSE INJURIES AS WELL. MY CAR IS NOW SITTING COVERED IN GLASS AS IF I WAS IN A HORRENDOUS CAR ACCIDENT WAITING FOR THE MANUFACTURE TO REPAIR THE ISSUE.
On 12/1, around 7:20am my fiancé and I were getting ready to leave for work; there was frost on the car so my fiancé went out to start it and turn on the defrosters. After starting the car, he turned on the heater and front and rear defrosters, he then went inside to retrieve some items we needed to load into the car. He was inside for about 5 minutes before coming out to see smoke emanating from right side of the trunk, which quickly turned into a small fire, whose point of origin was the rear fuse compartment. He ran inside to grab water to try and put it out, but due to how quickly it was spreading, as well as the fact that it was electrical nature, the water only served to temporary diminish but not extinguish the flames. We then used an ABC rated fire extinguisher from our kitchen, which did suppress and extinguish the fire. The vehicle still started, and we were able to drive it from our driveway to the side of our home, however, with the risk of it igniting again or creating any other failures, in addition to the guidance provided by our insurance company and Audi Corporate, we had the vehicle towed to an Audi dealership for further investigation. There was no indication prior to this that would lead us to believe the car would catch fire. We consider ourselves to be lucky that we were not driving as we would have no way to extinguish the fire on the side of the road. Since this incident, an investigation was done by Audi corporate. It was determined that there was corrosion within the right trunk compartment caused by water at some point which caused a short considering the body module and fuses are located there. However, Audi claims no responsibility in the water getting into the trunk or any manufacturing defects. Upon our own research though, we’ve seen many reports of Q models have sunroofs draining into the interior. The car has since been totaled by insurance due to repair estimates nearing $29,000 and taken to Copart auction.
On Tuesday, September 2nd, I was in a car accident on the freeway. A car jump out in front of me and did not go quickly enough, I hit my breaks, but still hit them going around 55-60 MPH. When the impact occurred, my car turned itself off and I saw smoke coming out of the dash / center area of the car. I was able to start my car and get it off of the freeway safely. My airbag did not deploy, and it appeared the charge went off. The airbag light is now illuminated on the dash. There are no open recalls on my car, and I am truly concerned there is an issue with the airbags and do not want anyone else to get hurt if their airbags do not go off. I spoke with the local dealership on Friday, and they recommended that I reach out directly to Audi. I contacted Audi, answered all of their questions, sent photos and the police report. This is the response I received from them today, 9/22: "Our engineer has completed the review of all the documentation you provided. Here is his assessment: Damage to this vehicle is to sheet metal and composite material components of the hood, fender, headlight, bumper cover, and radiator core support. The impact is offset to the right, outside the bumper reinforcement system with no apparent damage or longitudinal compression of the bumper deformation elements or frame long members. The progressive deformation of the components listed above absorbs crash energy over a longer period of time, lowering the vehicles rate of deceleration below the threshold criteria for airbag deployment. This vehicle performed as designed." I do not believe this is accurate because there was smoke inside the car, and now the airbag light is illuminated.
WAS MAKING A LEFT TURN. THE DRIVERS SIDE MIRROR BLINDED MY VIEW OF THE CAR WAITING AT THE STOP SIGN OF THE ROAD I WAS ENTERING. MY CAR CLIPPED THE OTHER CAR. *TR
My Q5 has a defective subframe. The system is defective because plastic coverings on the subframes of Audi Q5s and SQ5s trap moisture and other elements, causing the subframe to rust, rot, and corrode undetected, which creates a dangerous safety hazard, the existence and extent of which is concealed by the plastic coverings. This results in a myriad of negative consequences for the Class Vehicles and their safe and reliable operation. The defect, which can only be discovered after removing the plastic covering on the vehicles’ steel subframe, leaves an affected Audi vulnerable to “structural instability.”
The rear sub frame has completely rusted through, on both driver and passenger sides. This makes the vehicle extremely unsafe to drive. It is a 2014 q5 with 160k miles. There is a hole on the bottom of the frame on both sides due to a poorly designed cover that traps salt and other road debris leading to premature failure.
Post fix EDR cooler failure causing coolant fluid loss " enough complaints pressure on Audi Reference EA189 emissions fix Subject: Goodwill Assistance Request – 2014 Q5 TDI EGR Cooler – VIN [XXX] Audi Customer Experience Team, I am writing to request goodwill assistance for my 2014 Audi Q5 TDI, VIN [XXX] , with 105,000 miles. Vehicle Issue The car is losing engine coolant with no external leaks. Symptoms are consistent with a failed EGR cooler: low coolant warnings every few weeks, white smoke on cold starts, and no puddles or visible leaks. This is a documented failure mode on the 3.0L TDI V6 engine, especially after the emissions modification. Warranty Background - Original in-service date: [XXX] - Emissions modification completed: 2018 - Current mileage: 105,000 I understand the EGR cooler is a covered component under the TDI Extended Emissions Warranty as an emissions-related part. While the 10-year time provision from the in-service date expired [XXX], I am well under the 120,000-mile limit. The 4 years/48k miles from the 2018 modification also places the failure directly within the spirit of the extended coverage. Basis for Goodwill Request The EPA-approved emissions modification increased EGR duty cycles and thermal stress on the cooler. This failure is a direct consequence of that modification. Repair quotes from Audi dealers are 1,200-2,000 due to the labor involved to access the cooler in the V of the engine. The vehicle has been maintained with VW 507.00 specification oil and has no aftermarket modifications. I intend to keep the vehicle long-term if repaired. Request I respectfully request Audi cover the diagnosis and replacement of the EGR cooler under goodwill. I am happy to have the work performed at an authorized Audi dealer in Houston. I appreciate your consideration and can provide service records or additional photos if needed. I can be reached at [XXX] or this email. Thank you INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Severe corrosion of the rear subframe crossmember on a 2014 Audi Q5 Premium Plus, purchased with 65,464 miles. Two independent inspections in South Carolina confirmed structural failure. Audi of Greenville, an authorized Audi dealership, marked the condition as VERY DANGEROUS on the service invoice and quoted $4,711.52 for subframe replacement. They were unable to perform a wheel alignment due to the severity of the corrosion. Yoder's Automotive in Westminster, SC independently confirmed the subframe was rusted beyond repair on both sides. Fist-sized holes have corroded through the structural metal on both sides of the subframe. The vehicle has plastic stone guard covers bolted over the subframe from the factory. These covers trapped road salt and moisture against unpainted mild steel, accelerating concealed corrosion that was invisible until the covers were removed during inspection. The vehicle is undriveable and has not been driven since the defect was discovered in approximately March 2026. This defect pattern is documented in at least 16 prior NHTSA complaints for Audi Q5 models spanning model years 2010 through 2018. Audi has revised the subframe part number at least five times (8R0505235F through 8R0505235N) but has issued zero recalls and zero consumer notifications.
This vintage 2014 Audi A5 has a well known serious rust perforation issue with the rear subframe. The corrosion / rust through of two major holes, approx 3 inches in diameter, causing structural failure of the sub frame. This is a major saftey concern with these cars from model year 2009 thru 2017. The only remedy is replacement of the sub frame under Audi's 12 year rust perforation warranty or good will.
The contact owns a 2014 Audi Q5. The contact stated that while driving at an undisclosed speed, there was an abnormal fuel odor inside the vehicle. The contact stated that while exiting the vehicle, the fuel odor was also outside the vehicle. No warning lights were illuminated. The vehicle was taken to an independent mechanic, where it was diagnosed with a leaking fuel pump. The contact was informed of NHTSA Campaign Number: 17V298000 (Fuel System, Gasoline). The dealer was made aware of the failure, and the contact was informed that the recall repair was performed in 2017. The contact was informed that a protective film was applied during the recall repair. The manufacturer was made aware of the failure but provided no assistance. The contact was informed that the recall repair had a one-year warranty. The failure mileage was approximately 108,000.
I am filing a safety complaint regarding a progressive engine defect. Beginning as early as 2019 (approximately 84,000 miles), I repeatedly reported excessive oil consumption and related engine concerns to authorized Audi dealerships. These complaints continued over several years. At no point was I informed that these symptoms could be associated with a known defect pattern or progressive engine failure. The condition has now escalated to a severe engine malfunction. The vehicle began exhibiting engine misfires, flashing check engine light, EPC warning, and unstable operation. The dealership confirmed misfire fault codes and oil contamination affecting the ignition system. Engine replacement was initially recommended. Excessive oil consumption leading to internal contamination and misfires presents a significant safety hazard. Loss of engine power or sudden failure while driving can create dangerous conditions, particularly at highway speeds or in traffic. Despite the long history of reported symptoms, Audi of America has declined to provide assistance, citing only warranty status and failing to address the defect progression. The vehicle has now been inoperable at an Audi dealership for approximately 60 days (nearly two months), with no resolution. This situation raises concerns regarding a safety-related defect, failure to disclose a known issue, and a potential broader pattern affecting similar vehicles equipped with this engine. I am requesting that this issue be reviewed for potential defect investigation. The dealer provided diagnostic findings with Failure Codes via a temporary link that is no longer accessible. I am requesting a copy of the full report and will upload this (once received), along with other documentation.
Vehicle rear subframe comes with plastic covers that trap road salt and cause severe corrosion. Issue only presents itself when plastic covers are removed, revealing rust/corrosion and lost material, and a risk of the subframe to split resulting in lost of vehicle control on the road. This was found as a preventative action due to reports from other car owners and is confirmed by Audi Dealers as a common issue. Labor and parts estimate around $6000 (including $2000 in parts)
Von Haltern dieses Modelljahrs eingereicht und von der NHTSA nicht geprüft — die Schilderung einer Person, keine feststehende Tatsache.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2017 Audi A5 Cabriolet, A5 Sedan and Audi Q5 vehicles, 2012-2015 Audi A6 vehicles and 2013-2016 Audi A4 Sedan and A4 allroad vehicles. These vehicles, equipped with 2.0l Turbo FSI engines, have an electric coolant pump that can either become blocked with debris from the cooling system causing it to overheat or can short-circuit from moisture within the pump.
Abhilfe: Audi will notify owners, and dealers will replace the pumps, free of charge. The recall began September 14, 2018. Owners may contact Audi customer service at 1-800-253-2834. Audi's number's for this recall is 19N3/19N4. Note: This recall is in additional to the coolant pump software update applied as a remedy under recall 17V002.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2016 Audi A5 Coupe, A5 Cabriolet, A4 Sedan, A4 Allroad and Q5 vehicles. Contact corrosion within the electrical connector for the auxiliary heater may cause the heater wires to overheat or melt.
Abhilfe: Audi will notify owners, and dealers will replace the auxiliary heater and, as necessary, update the software, free of charge. The Recall began November 27, 2017. Owners may contact Audi customer service at 1-800-893-5298. Volkswagen's numbers for this recall are 80C5 and 80C6.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2013-2017 Audi Q5 and 2013-2017 Audi Q7 vehicles. These gasoline-powered vehicles have a fuel pump flange that may crack, allowing fuel to leak.
Abhilfe: Audi will notify owners, and dealers will replace the fuel pump flange if cracks are present. Flanges that do not have cracks will have a protective film applied. These repairs will be performed free of charge. The recall began July 3, 2017. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 20Z8. Note: This recall is an expansion of recall 16V-660.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2017 Audi A5, A5 Cabriolet and Q5 vehicles, 2013-2016 Audi Allroad and Audi A4 vehicles and 2012-2015 Audi A6 vehicles. These vehicles, equipped with 2.0l Turbo FSI engines, have an electric coolant pump that can be blocked with debris from the cooling system, resulting in the pump overheating.
Abhilfe: Audi will notify owners, and dealers will update the software so that the power supply to the coolant pump is deactivated if the pump becomes blocked with debris, free of charge. The recall is expected to begin February 20, 2017. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 19M1.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2011-2017 Audi Q5 vehicles. The sunroof drainage system may allow water to soak into the foam surrounding the side head air bag inflator canister resulting in the corrosion of the canister. If this happens, the corrosion can weaken the canister and the inflator could fracture without air bag deployment, propelling fragments into the passenger compartment, striking and causing serious injury to vehicle occupants.
Abhilfe: Audi will notify owners, and dealers will inspect the inflator and either coat it or replace it, as necessary, after removing the surrounding foam, free of charge. The recall is expected to began March 2017. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 69P1.
Nach Modelljahr veröffentlicht, nicht nach FIN — betrifft dieses Fahrzeug möglicherweise nicht oder wurde bereits erledigt. Beim Händler bestätigen.
Divergent torques during the bolting process may cause the cylinder head cover bolts to loosen. Motor oil may come out of the cylinder head cover bolt holes, come into contact with hot parts of the engine, and thereby generate smoke or cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The high-voltage battery’s cell modules could overheat during charging. This may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The seatbelt pre-tensioner of the front seats does not comply with the technical specifications. Although the seatbelt tightens in a crash that triggers its deployment, it cannot reliably maintain this tightness, thus reducing its protective effect and increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The driver airbag inflator may cause uncontrolled inflation and release metal fragments when the airbag is activated, which can cause injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
During the charging process, the high/voltage battery may overheat due to a defect in the battery modules. This can result in a fire and cause injuries to occupants and bystanders. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Abgeglichen über Marke und Modellname — Safety Gate veröffentlicht keine FIN. Prüfen Sie die Produktionsdaten und nennen Sie dem Händler den Rückrufcode.